1. Setup
1.1 Battery Installation
The K96 keyboard is powered by two No. 7 (AAA) batteries. To install:
- Locate the battery compartment on the rear of the keyboard.
- Slide open the battery compartment cover.
- Insert two No. 7 (AAA) batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
1.2 2.4G Wireless Connection
For 2.4G wireless connectivity:
- Locate the dual-head USB receiver (USB-A and USB-C) in the battery compartment.
- Plug the appropriate connector (USB-A or USB-C) of the receiver into your desktop computer, laptop, or mobile device.
- On the keyboard, press the
FN + Qkeys simultaneously. The blue light will flash, indicating pairing mode. - The keyboard should automatically connect to your device.
1.3 Bluetooth 5.0 Connection
For Bluetooth 5.0 connectivity:
- On the keyboard, press
FN + WorFN + Esimultaneously. The blue light will flash, indicating pairing mode for BT1 or BT2 respectively. - On your mobile device (laptop, tablet, smartphone), navigate to the Bluetooth settings.
- Select 'K96 BT5.0' from the list of available devices to pair.
- Once paired, the keyboard is ready for use.
2. Operating Instructions
2.1 Multi-Mode Connectivity
The K96 keyboard supports both 2.4G wireless and Bluetooth 5.0 connections, allowing seamless switching between up to three devices (one 2.4G, two Bluetooth). This makes it suitable for desktop computers, notebooks, and mobile devices.
2.2 100-Key Layout and Anti-Ghosting
The keyboard features a compact 100-key layout, providing a full range of functionality without taking up excessive desk space. It supports 19-key anti-ghosting, ensuring accurate and fast response even during complex key presses, ideal for both gaming and office use.
2.3 Keycap Design and Feel
The keycaps are made from ABS plastic using a two-color secondary injection molding process. This design ensures durability, wear resistance, and prevents oiling over time, providing a consistent and fine tactile feel.
3. Maintenance
3.1 Cleaning the Keyboard
To maintain optimal performance and appearance:
- Use a soft, lint-free cloth to wipe down the keycaps and keyboard surface regularly.
- For deeper cleaning, use a can of compressed air to remove dust and debris from between the keys.
- Avoid using harsh chemicals or abrasive materials, as these can damage the keycaps or finish.
3.2 Hot-Swappable Switch Replacement
The K96 keyboard features a full-key hot-swappable design, allowing you to easily replace individual switches without soldering. This enables customization and extends the lifespan of your keyboard.
- Using the provided shaft puller tool, carefully grip the switch you wish to remove.
- Gently pull upwards until the switch detaches from the PCB.
- Align the pins of the new switch with the holes on the PCB.
- Press down firmly until the new switch clicks into place.
3.3 Battery Replacement
When the keyboard's power indicator shows low battery or connectivity issues arise due to power, replace the two No. 7 (AAA) batteries as described in Section 1.1.
4. Troubleshooting
4.1 Connectivity Issues
- 2.4G Wireless: Ensure the USB receiver is securely plugged into your device. Check that the keyboard is in 2.4G mode (
FN + Q). Try plugging the receiver into a different USB port. - Bluetooth: Ensure Bluetooth is enabled on your device. Check that the keyboard is in the correct Bluetooth pairing mode (
FN + WorFN + E). Forget the device on your host system and re-pair. - General: Ensure the keyboard batteries are not depleted. Replace them if necessary.
4.2 Keys Not Responding
- Check if the keyboard is properly connected via 2.4G or Bluetooth.
- If only specific keys are not responding, consider replacing the individual hot-swappable switch for that key (refer to Section 3.2).
- Ensure the keyboard is not in sleep mode. Press any key to wake it up.
5. Specifications
| Feature | Specification |
|---|---|
| Keyboard Type | K96 Wireless Bluetooth Mechanical Keyboard |
| Number of Keys | 100 keys |
| Axis | Hot-drawing shaft mechanical shaft (Red Switch) |
| Operating Current | <200mA |
| Interface | USB+Type-C (for receiver) |
| Working Voltage | 5W+2.5W |
| Transmission Method | Bluetooth 5.0 + 2.4G wireless |
| Silencing Structure | Double ISSI silencing (Sandwich Cotton + Bottom Sound-Deadening Cotton) |
| Keyboard Size | 396*140*40±0.5mm |
| Keyboard Weight | 845g±5% |
| Keycup Printing | Doublshot |
| Keycup Material | ABS plastic |
| Switches Hot Swap | Yes |
| Backlight Type | No backlight |
| Application | Desktop, Laptop, Tablet |
| Language | English |
| Origin | Mainland China |
| Certification | CE |
6. User Tips
- Customization: The full-key hot-swappable design allows for easy customization of switches. Experiment with different switch types to find your preferred typing feel.
- Portability: The compact design and wireless connectivity make the K96 highly portable. Remember to carry the dual-head receiver for 2.4G connections.
- Battery Life: The keyboard is designed for energy saving, with one installation of two No. 7 batteries lasting up to six months.
7. Warranty & Support
For any product inquiries, technical support, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.
