1. Setup and Installation
The Y80-2X intercom is designed for easy installation and is compatible with a wide range of helmet types. Ensure your helmet is clean and dry before installation.
1.1 Package Contents
Before you begin, verify that all components are present in your package. The Y80-2X comes in single or double pack options, so quantities may vary.
- Y80-2X Host (1 or 2 units)
- Speaker Microphone (1 or 2 sets)
- Clip-on Base (1 or 2 units)
- Velcro Installation Pack (1 or 2 sets)
- Type-C Charging Line (1 or 2 units)
- User Manual (1 unit)


1.2 Helmet Compatibility
The Y80-2X is designed to be easily installed on most helmet types, including:
- Full helmets
- Half helmets
- Off-road helmets
- Open face helmets (Unmask helmet)
- Retro helmets

1.3 Installation Steps
- Attach the clip-on base to the side of your helmet. Ensure it is securely fastened.
- Mount the Y80-2X host unit onto the clip-on base. The design allows for a simple and safe split installation for convenient charging.
- Install the speaker microphone inside the helmet. Position the speakers over your ears and the microphone near your mouth for optimal audio quality. Use the provided Velcro for secure placement.
- Connect the speaker microphone cable to the Type-C speaker MAC interface on the host unit.

2. Operating Instructions
Familiarize yourself with the controls and functions of your Y80-2X headset for an optimal experience.
2.1 Controls Overview

- Volume Down / Previous Song: Short press for previous song, long press for volume down.
- Volume Up / Next Song: Short press for next song, long press for volume up.
- Intercom Key / Charging Indicator: Activates intercom function; also indicates charging status.
- Work Indicator Light: Shows device status (e.g., power on, pairing, connected).
- Voice Assistant Button: Short press to activate AI voice assistant.
- Power On/Off / Play / Pause / Hang Up: Multi-function button for power control and media playback/call management.
- Type-C Charging Port: For charging the device.
- Type-C Speaker MAC Interface: Connects the speaker microphone.
2.2 Bluetooth Pairing
The Y80-2X can connect to two mobile phones simultaneously, allowing you to seamlessly switch between music, navigation, and answering calls.
- Ensure the Y80-2X is powered off.
- Press and hold the Power On/Off button until the indicator light flashes, indicating pairing mode.
- On your mobile device, enable Bluetooth and search for 'Y80-2X'.
- Select 'Y80-2X' to pair. Once connected, the indicator light will change.
- Repeat for a second mobile device if desired.

2.3 Intercom Function
The Y80-2X supports intercom communication for up to two riders with a range of 500-1000 meters. It is also adaptable for intercom with other Bluetooth headsets, though the range may be reduced to 10-50 meters.

2.4 Call Management
- Answering Calls: Incoming calls are answered automatically after a voice announcement of the telephone number, eliminating the need for manual operation and enhancing safety.
- Ending Calls: Press the Power On/Off / Play / Pause / Hang Up button to end a call.

2.5 Voice Assistant
Activate your AI voice assistant (e.g., Siri, Google Assistant) with a short press of the dedicated voice button. This allows for hands-free control of your device and connected smartphone.

2.6 Noise Reduction
The Y80-2X features CVC DSP dual intelligent noise reduction technology and a silicon microphone. This effectively reduces ambient noise, ensuring clear call quality even at speeds over 100 km/h.

3. Maintenance
Proper care and maintenance will extend the lifespan of your Y80-2X headset.
3.1 Cleaning
- Wipe the exterior of the unit with a soft, damp cloth.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the charging port and speaker interface are free of dust and debris.
3.2 Water Resistance
The Y80-2X is IP67 deep water resistant, providing protection against dust and rain. This ensures reliable performance in various weather conditions.

3.3 Charging
- Use the provided Type-C charging line to charge the device.
- Connect the charging cable to the Type-C charging port on the Y80-2X unit and a suitable USB power source.
- The charging indicator will show the charging status.
4. Troubleshooting
If you encounter issues with your Y80-2X headset, refer to the following common solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery; Device frozen | Charge the device fully. Perform a hard reset by holding the power button for 10 seconds. |
| Cannot pair with phone | Device not in pairing mode; Bluetooth off on phone; Interference | Ensure device is in pairing mode (flashing indicator). Turn phone's Bluetooth off and on. Move away from other Bluetooth devices. |
| Intercom not connecting | Out of range; Incorrect pairing; Battery low | Ensure both units are within intercom range. Re-pair the intercom units. Check battery levels. |
| Poor audio quality / Excessive noise | Microphone/speaker placement; High wind noise; Environmental interference | Adjust microphone and speaker position. Ensure microphone is not directly exposed to wind. The CVC noise reduction should handle most ambient noise. |
5. Specifications
| Feature | Detail |
|---|---|
| Model Name | Y80-2X |
| Bluetooth Version | V5.3 |
| Support Intercom | Yes |
| Maximum Intercom Distance | 500-1000m (for 2 riders); 10-50m (with ordinary Bluetooth earphones) |
| Maximum Number of Speakers | 2 |
| Applicable Helmet Type | MODULAR, MOTOCROSS, Open face, Full Face, Flip Up Helmet |
| Special Functions | Universal Pairing Function, Waterproof, Noise Reduction (CVC DSP) |
| Power Supply Mode | Built-in Battery |
| Connection Mode | Wire, Bluetooth |
| Waterproof Rating | IP67 |
| Item Type | Helmet Headset |
| Certification | CE |
| Origin | Mainland China |
6. User Tips
- Pre-Ride Charge: Always ensure your Y80-2X is fully charged before a long ride to maximize battery life and avoid interruptions.
- Intercom Range Test: When using the intercom function for the first time or in a new environment, test the range in an open area to understand its effective distance.
- Voice Assistant for Safety: Utilize the one-click voice assistant feature for hands-free control of your phone's functions, such as navigation or music, to maintain focus on the road.
- Microphone Placement: For optimal noise reduction and clear communication, ensure the microphone is positioned correctly, close to your mouth but not directly in the path of wind.
7. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official QINLIFE website or contact your retailer. Keep your purchase receipt as proof of purchase.