1. Introduction
Thank you for choosing the DIVEDEER Window Cleaning Robot. This intelligent device is designed to simplify window cleaning, offering efficient and safe operation for various glass surfaces. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Important Safety Information
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury or damage.
- Always connect the robot to the power cord during use. This is not a wireless device.
- Always attach the safety rope to a secure anchor point before placing the robot on the window to prevent falls. The safety rope length is 4.5 meters.
- Ensure the window surface is free from large debris or sharp objects that could damage the robot or cause it to lose suction.
- Do not use the robot on cracked or damaged glass.
- Keep hands, hair, and loose clothing away from moving parts.
- Do not operate the robot in rain or extreme weather conditions.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- The power supply and robot have passed CE, FCC, ROHS, CCC, UL certifications.
3. Package Contents
Verify that all items are present in your package:
- 1 x Main Robot Unit
- 1 x Power Cord + Adapter
- 1 x Remote Control (color may vary, batteries not included)
- 2 pairs (4 pcs) x Cleaning Rings
- 1 x 4-meter Extension Cable
- 1 x Spray Bottle
- 10 x Cleaning Cloths (YTK-330 models include 12 cleaning cloths)
- 1 x Product Manual (English)
4. Specifications
The following table details the specifications for the DIVEDEER Window Cleaning Robot series:
| Feature | Specification |
|---|---|
| Model Series | YTK330, YTK334, YTK02 |
| Motor Type | Brushed (YTK330, YTK334), Brushless (YTK02) |
| Water Tank Capacity | No (YTK330), 30ml (YTK334, YTK02) |
| Water Spray Function | No water spray (YTK330), Single water spray (YTK334, YTK02) |
| Input Voltage | AC110-240V~50/60Hz |
| Output Voltage (Adapter) | 24V, 3.75A |
| Rated Power | 80W |
| Suction Force | 2800Pa ± 10% (per wheel, total 5600Pa for two-wheel models) |
| Cleaning Speed | 5 mins/m² |
| Built-in Battery Capacity | 500mAh |
| Cleaning Modes | Automatic/Manual (2 types: N/Z) |
| Noise Level | 65dB |
| Product Size | 295 x 145 x 68 mm |
| Remote Control | Infrared/2.4G, Yes |
| Bezel Detection | Automatic detection for bezel glass |
| Safety Rope Length | 4.5 meters |
5. Setup Instructions
- Attach Cleaning Cloths: Securely attach the provided cleaning cloths to the cleaning rings on the bottom of the robot.
- Connect Power: Connect the power cord to the robot and then to a power outlet. Ensure the connection is secure.
- Attach Safety Rope: Before placing the robot on the window, securely attach the safety rope to a fixed, sturdy object (e.g., a heavy piece of furniture, a window frame anchor). This is crucial to prevent the robot from falling.
- Fill Water Tank (if applicable): For models with a water spray function (YTK334, YTK02), fill the integrated 30ml water tank with appropriate window cleaning solution or water.
- Insert Remote Control Batteries: The remote control requires 1 pair of batteries (not included). Insert them according to the polarity markings.
6. Operating Instructions
- Power On: Press the power button on the robot. Wait approximately 20 seconds for the blue light to stop flashing. This indicates the robot has detected the glass plane and is ready to operate.
- Placement: Carefully place the robot onto the window surface. Ensure it adheres firmly before releasing your grip.
- Automatic Mode: After powering on and adhering to the glass, the robot will typically enter automatic cleaning mode. In this mode, the remote control may not respond immediately.
- Manual Mode (Remote Control): To use the remote control for manual operation:
- Turn off the robot.
- Wait 1-2 minutes.
- Turn on the robot and long-press the power button for 20 seconds. The robot should now be in manual mode, allowing control via the remote.
- Water Spray (for applicable models): For models with water spray, ensure the water tank is filled. The robot will automatically spray water during cleaning, or you can manually activate it via the remote control in manual mode.
- Monitoring: Always monitor the robot during operation, especially when cleaning high or external windows.
- Completion: Once cleaning is complete, the robot will typically return to its starting position or stop. Carefully remove it from the window.
7. Maintenance
- Clean Cleaning Cloths: After each use, remove and wash the cleaning cloths. They are reusable.
- Clean Robot Surface: Wipe the robot's exterior with a soft, dry cloth to remove any dust or residue.
- Check Sensors: Periodically inspect the sensors for cleanliness. Dust or dirt on sensors can affect performance.
- Empty Water Tank: If your model has a water tank, empty any remaining solution after use to prevent residue buildup.
- Store Properly: Store the robot and its accessories in a dry, cool place away from direct sunlight.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start or adhere to glass. | Not properly powered, insufficient suction, or glass not detected. | Ensure power cord is securely connected. Wait 20 seconds after powering on for glass detection (blue light stops flashing). Check for obstructions on the glass surface. |
| Remote control not working. | No batteries, dead batteries, or robot in automatic mode. | Insert fresh batteries into the remote. If the robot is in automatic mode, follow instructions in Section 6 to switch to manual mode (long-press power button for 20 seconds after restart). |
| Robot falls from window. | Safety rope not attached, power loss, or severe glass defect. | ALWAYS attach the safety rope to a secure anchor point. Ensure continuous power supply. Do not use on damaged glass. |
| Cleaning performance is poor. | Dirty cleaning cloths, insufficient water/solution, or heavily soiled window. | Replace or wash cleaning cloths. Ensure water tank is filled (if applicable). Pre-clean heavily soiled windows manually if necessary. Spray some water on the edge of the mop for better effect. |
9. User Tips
- Optimal Cleaning: For best results, spray a small amount of water or cleaning solution on the edge of the mop pads before starting.
- Surface Compatibility: While primarily designed for windows, users have inquired about cleaning mirrors and tiled walls. Always test on a small, inconspicuous area first to ensure compatibility and prevent damage.
- Remote Control: Remember that the remote control is most effective when the robot is in manual mode. If it seems unresponsive, check the robot's mode and remote batteries.
10. Warranty and Support
The DIVEDEER Window Cleaning Robot comes with a standard warranty. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or any questions regarding your product, please contact the seller or manufacturer directly. They can provide detailed guidance and support.