DIVEDEER DIVEDEER Window Cleaning Robot (YTK330, YTK334, YTK02 Series)

Contents

DIVEDEER Window Cleaning Robot Instruction Manual

Models: YTK330, YTK334, YTK02 Series

1. Introduction

Thank you for choosing the DIVEDEER Intelligent Window Cleaning Robot. This device is designed to simplify window cleaning, especially for high-rise windows, by providing efficient and automated cleaning. Please read this manual thoroughly before operating the robot to ensure safe and optimal performance.

2. Important Safety Information

  • This product must be connected to the power cord during operation. It is not a wireless (WIFI) device.
  • Always bind the safety rope before use to prevent the robot from falling from high altitudes. The safety rope is designed to withstand a load capacity of 80KG.
  • Ensure the power supply is stable and meets the specified voltage requirements.
  • Keep the robot and its accessories out of reach of children and pets.
  • Do not use the robot on cracked or damaged glass surfaces.
  • The entire machine and its power supply have passed CE, FCC, ROHS, CCC, and UL safety testing and certification.

3. Package Contents

Please check the package to ensure all items are present:

  • 1 x Main Robot Unit
  • 1 x Power Cord + Adapter
  • 1 x Remote Control (Note: Batteries are not included and must be purchased separately. Remote control color may vary between white and black.)
  • 2 Pairs of Cleaning Rings (4 pcs)
  • 1 x 4-meter Extension Cable
  • 1 x Spray Bottle
  • 10 x Cleaning Cloths (YTK-330 model includes 12 cleaning cloths)
  • 1 x Product Manual (English)

4. Product Overview

The DIVEDEER Window Cleaning Robot features a brushless motor for efficient operation and a strong suction power of 2800Pa ± 10%. Its ultra-thin body (7.2cm / 68mm) allows it to clean various window types. It includes an automatic water spray system with a 30ml water tank for thorough cleaning.

DIVEDEER Window Cleaning Robot with key features highlighted: Brushless motor, 2800Pa suction, 7.2cm body thickness, and 10 cleaning cloths.

Figure 1: Robot overview with key specifications.

DIVEDEER Window Cleaning Robot showing 30ml water tank, 4.5M safety rope, 68mm ultra-thin body, and 2800Pa strong adsorption.

Figure 2: Robot features including water tank and safety rope length.

Product size diagram showing robot dimensions: 29.5cm length, 14.5cm width, 6.8cm thickness, compared to an iPhone 13 Pro Max.

Figure 3: Product dimensions for the window cleaning robot.

Image showing the robot attached to a window with a safety rope, highlighting its 80KG load capacity.

Figure 4: Safety rope and load capacity demonstration.

5. Specifications

Product parameter table listing specifications such as size, voltage, power, tank capacity, suction, motor type, noise, cleaning speed, battery, remote control, bezel detection, cleaning modes, and features.

Figure 5: Detailed product parameters.

Product Specifications
FeatureSpecification
Product Size295*145*68 mm
Input VoltageAC110-240V~50/60Hz
Output Voltage24V, 3.75A
Power80W
Tank Capacity30ml
Suction Power2800Pa
Motor TypeBrushless motor (some models may have brushed motor)
Noise Level70 dB (approx.)
Cleaning Speed5 mins/m²
Built-in Battery Capacity500mAh
Remote ControlInfrared/2.4G
Bezel DetectionAutomatic detection for bezel glass
Cleaning Modes2 types (N/Z)
FeaturesRound shape, ultra-thin model, Ultrasonic single water jet
Image comparing noise levels: Car Driving at 70 dB, Window cleaner at 65 dB, Whispering at 40 dB.

Figure 6: Noise level comparison for the window cleaner.

6. Setup Instructions

  1. Attach Cleaning Cloths: Securely attach the provided cleaning cloths to the two rotating discs on the underside of the robot.
  2. Fill Water Tank (if applicable): For models with water spray function, fill the 30ml water tank using the provided spray bottle.
  3. Connect Power: Connect the power cord to the robot and then to a power outlet. The robot requires continuous power during operation.
  4. Install Remote Control Batteries: Insert 1 pair of batteries (not included) into the remote control. The remote control does not light up.
  5. Attach Safety Rope: Crucially, bind the safety rope to a secure anchor point before placing the robot on the window. This prevents accidental falls.
  6. Power On: Press the power button on the robot. Wait approximately 20 seconds for the blue light to stop flashing, indicating the robot has detected the glass plane and is ready to work.
Image showing the water spray points on the robot and the remote control unit.

Figure 7: Water spray points and remote control.

Video 1: Demonstration of the window cleaning robot's operation and remote control functionality.

7. Operating Instructions

The robot offers both automatic and manual cleaning modes.

Automatic Cleaning Mode

After powering on and waiting for the blue light to stabilize (approx. 20 seconds), the robot will automatically enter the automatic cleaning mode. In this mode, the remote control may not respond immediately as the robot follows its pre-programmed cleaning path.

Manual Cleaning Mode

To switch to manual mode and use the remote control:

  1. Turn off the robot.
  2. Wait 1-2 minutes.
  3. Restart the robot and long-press the power button for 20 seconds. The robot will then enter manual mode, allowing control via the remote.
Diagram illustrating the three cleaning modes: Up to down, Left to down, and Right to down, along with the remote control type (2.4G/infrared).

Figure 8: Three available cleaning modes and remote control.

Cleaning Process

The robot uses a twin-disc friction system, imitating manual hand-wiping with one wheel twisting and the other wiping. It cycles alternately to clean and polish the glass.

Diagram showing the twin-disc friction cleaning mechanism, with arrows indicating the alternating rotation for cleaning.

Figure 9: Twin-disc friction cleaning action.

8. Maintenance

  • Cleaning Cloths: After each use, remove and wash the cleaning cloths. Ensure they are dry before reattaching for the next use.
  • Water Tank: Empty any remaining water from the tank after use. Clean the tank periodically to prevent residue buildup.
  • Robot Body: Wipe the robot's body with a soft, dry cloth. Do not use abrasive cleaners or immerse the robot in water.
  • Storage: Store the robot in a cool, dry place away from direct sunlight and extreme temperatures.

9. Troubleshooting

  • Robot not starting or responding:
    • Ensure the power cord is securely connected and the robot is receiving power.
    • Wait 20 seconds after powering on for the blue light to stabilize. The robot needs this time to detect the glass surface.
    • If using the remote control, ensure it has fresh batteries and that the robot is in manual mode (refer to Operating Instructions).
  • Robot falling or losing suction:
    • Always ensure the safety rope is securely attached to a fixed point.
    • Check that the cleaning cloths are properly attached and not excessively wet, which can reduce suction.
    • Ensure the glass surface is clean and free of large debris that could interfere with suction.
  • Remote control not working:
    • Replace the batteries in the remote control.
    • Ensure the robot is in manual mode for remote control functionality.

10. User Tips

  • For best cleaning results, spray some water on the edge of the mop pads before starting the cleaning cycle.
  • The robot is designed to work on various glass types, including those with bezels, thanks to its automatic bezel detection.
  • Remember to double-check the model number when purchasing to ensure you receive the correct version. Some models may have a 'DIVEDEER' brand logo, while others do not, and remote control colors may vary, but the product functionality remains the same.

11. Support

If you have any questions or require assistance with your DIVEDEER Window Cleaning Robot, please contact customer support at monazhang1017@qq.com. We aim to reply within 48 hours.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.