A-BF HT-18 plus

Contents

HTI HT-18 plus Infrared Thermal Imager User Manual

Model: HT-18 plus | Brand: A-BF

1. Introduction

The HTI HT-18 plus is an advanced infrared thermal imager designed for industrial measurement and pipeline inspection. It features a high-resolution infrared sensor, wide temperature measurement range, and various display modes to assist in identifying thermal anomalies and leaks. This manual provides essential information for the safe and effective use of your device.

HTI HT-18 plus Infrared Thermal Imager with key specifications and color palettes
Figure 1: HTI HT-18 plus Infrared Thermal Imager overview, highlighting its 256x192 resolution, -20°C to 550°C temperature range, 25Hz frame rate, 56°x42° field of view, high/low temp alarm, PC software analysis, and various color palettes (Rainbow, Iron Red, Cool Tone, White Hot, Black Hot).

2. Package Contents

Upon opening the package, please verify that all items are present and in good condition. The standard package typically includes:

  • HTI HT-18 plus Infrared Thermal Imager
  • Instruction Manual
  • USB Cable (for charging and data transfer)
  • Protective Case (if included with your specific purchase)
HTI HT-18 plus unboxed, showing the device and instruction manual
Figure 2: The HTI HT-18 plus thermal imager as packaged, alongside its instruction manual.

3. Setup

3.1 Charging the Device

The HT-18 plus comes with a built-in battery. Before initial use, ensure the device is fully charged. Connect the provided USB cable to the device's charging port and plug the other end into a compatible USB power adapter (not included) or a computer's USB port. The charging indicator on the device will show its status.

3.2 Powering On/Off

To power on the device, press and hold the power button located on the control panel until the screen illuminates. To power off, press and hold the power button again until the screen shuts down.

Detailed view of the HT-18 plus screen and control buttons
Figure 3: Close-up of the HT-18 plus control panel, showing the display and navigation buttons (Up, Down, Left, Right, Select, Enter, Power).

4. Operating Instructions

4.1 Basic Operation

Once powered on, the device will display the thermal image. Use the navigation buttons (Up, Down, Left, Right) to move the measurement spot or navigate through menus. The 'Select' or 'Enter' button is used to confirm selections.

HTI HT-18 plus in use, showing the screen display
Figure 4: The HTI HT-18 plus in operation, displaying a thermal image on its screen.

4.2 Temperature Measurement

The HT-18 plus measures temperatures within a range of -20°C to 550°C. The screen will display the temperature readings at the center point or other designated areas, depending on the selected measurement mode.

4.3 Color Palettes

The device offers several color palettes to visualize thermal data. These include:

  • Rainbow: A common palette for general thermal imaging, showing a full spectrum of colors.
  • Iron Red: Often used for high-contrast visualization of heat sources.
  • Cool Tone: Emphasizes cooler temperatures.
  • White Hot: Hotter objects appear white, cooler objects appear black.
  • Black Hot: Hotter objects appear black, cooler objects appear white.

Refer to the on-screen menu to select your preferred color palette for different inspection scenarios.

4.4 High/Low Temperature Alarm

The HT-18 plus features a high/low temperature alarm function. This allows users to set thresholds, and the device will alert you visually or audibly when temperatures exceed or fall below these predefined limits. This is particularly useful for identifying critical temperature deviations in industrial applications.

4.5 PC Software Analysis

For detailed analysis, connect the HT-18 plus to a computer using the USB cable. The device supports PC software analysis, allowing you to transfer thermal images and data for further examination, reporting, and advanced diagnostics. Please refer to the software's specific instructions for installation and usage.

5. Maintenance

5.1 Cleaning

Keep the thermal imager clean to ensure optimal performance. Use a soft, dry cloth to wipe the device body. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches. Do not use abrasive cleaners or solvents.

5.2 Storage

When not in use, store the device in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (around 50%) for long-term storage to prolong battery life.

5.3 Battery Care

To maintain battery health, avoid fully discharging the battery frequently. Recharge the device regularly, even if not in constant use.

6. Troubleshooting

6.1 Device Not Powering On

  • Ensure the battery is sufficiently charged. Connect the device to a charger and wait for a few minutes before attempting to power on again.
  • Verify that the power button is being pressed and held correctly.

6.2 Image Appears Distorted or Unclear

  • Check if the lens is clean. Dust or smudges can affect image quality.
  • Ensure the device is within its specified operating temperature range.
  • Verify that the target object is within the optimal measurement distance.

6.3 Inaccurate Temperature Readings

  • Ensure the emissivity setting is correctly adjusted for the material being measured.
  • Avoid measuring through reflective surfaces like polished metals or glass, as these can lead to inaccurate readings.
  • Allow the device to stabilize in the environment before taking critical measurements.

6.4 PC Software Connection Issues

  • Ensure the USB cable is securely connected to both the device and the computer.
  • Try a different USB port on your computer.
  • Verify that the necessary drivers for the device are installed on your computer.
  • Consult the PC software manual for specific connection troubleshooting steps.

7. Specifications

FeatureSpecification
ModelHT-18 plus
Infrared Resolution256 x 192 pixels
Temperature Range-20°C to 550°C (-4°F to 1022°F)
Frame Rate25 Hz
Field of View (FOV)56° x 42°
BatteryIncluded (Internal)
CertificationCE
OriginMainland China
Package Dimensions (L x W x H)20 cm x 15 cm x 10 cm
Package Weight1.3 kg

8. User Tips

No specific user tips were available from provided reviews or Q&A content. For best results, always ensure the lens is clean and the device is fully charged before use. Practice with the different color palettes to find the most effective visualization for your specific inspection tasks.

9. Warranty & Support

9.1 Product Warranty

The HTI HT-18 plus Infrared Thermal Imager comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2 Technical Support

For technical assistance, troubleshooting, or warranty inquiries, please contact the A-BF Official Store where the product was purchased. They can provide guidance and support for your device.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.