1. Introduction
The Scimagic-RC SMG256 is a versatile universal remote control designed for various applications including garage doors, gate doors, car alarms, and home security systems. This multi-frequency duplicator can clone both fixed and rolling codes across a wide frequency range of 280MHz to 868MHz. Its robust design, including an IPX6 waterproof rating, ensures reliable performance in diverse environments. This manual provides detailed instructions for setup, operation, and maintenance of your new remote control.
2. Specifications
| Feature | Detail |
|---|---|
| Product Name | Universal Remote Control |
| Model Number | SMG256 (Universal door remote control) |
| Material | ABS |
| Buttons | 4 Buttons |
| Dimensions | 63 x 37 x 12 mm (2.48 x 1.46 x 0.4 inches) |
| Weight | 35g |
| Battery | CR2032 (Included) |
| Operating Distance | 30-150m (Open area) |
| Frequency Range | 280-868MHz |
| Learning Frequencies | 287MHz, 300MHz, 306MHz, 310MHz, 315MHz, 315.5MHz, 330MHz, 360MHz, 390MHz, 410MHz, 430.5MHz, 433.42MHz, 433.92MHz, 868.35MHz, 286-361MHz, 384-400MHz |
| Encoding Method | Rolling Code & Fixed Code compatible |
| Waterproof Rating | IPX6 |
| Certification | CE |
Note: Some brands of rolling code remotes may not be compatible. 433MHz Fixed code is 100% compatible.

3. Features
- Multi-Functionality: One new remote can replace up to three old remotes, offering versatile control.
- Wide Frequency Range: Supports frequencies from 280MHz to 900MHz, making it compatible with a broad array of devices.
- 4 Programmable Buttons: Each button can be programmed to clone a different brand and frequency.
- IPX6 Waterproof: Designed to withstand water splashes and jets, ensuring durability in various conditions.


4. Setup and Cloning Instructions
The SMG256 remote control is a duplicator, meaning it learns codes directly from your existing remote control. The cloning process requires face-to-face interaction between the two remotes.
4.1. Clearing the Remote Control Memory
- Press and hold the two top buttons (buttons 1 and 2) simultaneously on the SMG256 remote.
- Keep holding until the LED indicator flashes rapidly three times.
- While still holding one of the top buttons, release the other top button.
- Press the released top button three times. The LED will flash rapidly, indicating that the memory has been successfully cleared.
After clearing, pressing any button on the SMG256 should not illuminate the LED, confirming the memory is empty.
4.2. Cloning Your Original Remote Control
The cloning process differs slightly depending on whether your original remote uses a fixed code or a rolling code.
4.2.1. Cloning Fixed Code Remotes
- Place your original remote control and the SMG256 remote control side-by-side or back-to-back, ensuring they are as close as possible.
- Press and hold a button on your original remote that you wish to clone. The LED on your original remote should light up.
- Simultaneously, press and hold the corresponding button on the SMG256 remote where you want to store the code.
- Hold both buttons until the LED on the SMG256 remote flashes rapidly. This indicates successful cloning.
- Release both buttons.
- Test the cloned button. If it works, repeat for other buttons.
4.2.2. Cloning Rolling Code Remotes
For rolling code remotes, the cloning process is similar, but an additional step is required to program/activate the new remote on your receiver (e.g., garage door opener unit).
- Follow steps 1-5 from the Fixed Code Cloning section (4.2.1).
- After successful cloning, you will need to program or activate the new SMG256 remote directly with your garage door opener or gate receiver. This usually involves pressing a 'Learn' or 'Program' button on the receiver unit and then pressing a button on your new SMG256 remote. Refer to your receiver's specific manual for detailed instructions on how to put it into 'learning mode'.

5. Operating Instructions
Once your SMG256 remote control has been successfully cloned and, if necessary, programmed to your receiver, operating it is straightforward:
- Press the button on the SMG256 remote that corresponds to the function you wish to activate (e.g., opening/closing a garage door, activating a gate).
- The LED indicator on the remote will light up briefly to confirm the signal transmission.
6. Maintenance
6.1. Battery Replacement
The SMG256 remote uses a CR2032 battery. If the remote's range decreases significantly or the LED indicator does not light up when a button is pressed, it may be time to replace the battery.
- Locate the small screw or latch on the back or side of the remote control casing.
- Carefully open the casing using a small screwdriver or by gently prying it open.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
- Close the remote control casing securely.
6.2. General Care
- Keep the remote control clean and dry. Although it is IPX6 waterproof, prolonged submersion is not recommended.
- Avoid dropping the remote control or subjecting it to strong impacts.
- Store the remote control away from extreme temperatures.
7. Troubleshooting
- Remote not cloning / LED not flashing rapidly: Ensure the original remote is working correctly and that the SMG256's memory has been cleared. Make sure the remotes are very close during cloning. Try different positions (side-by-side, back-to-back).
- Cloned remote not working (Fixed Code): Re-attempt the cloning process, ensuring the LED flashes rapidly to confirm success.
- Cloned remote not working (Rolling Code): After cloning, you MUST program/activate the new remote with your receiver unit. Refer to your receiver's manual for this step. If the receiver is not in learning mode, the cloned rolling code remote will not function.
- Reduced operating distance: This often indicates a low battery. Replace the CR2032 battery.
- Remote not responding: Check the battery. If the battery is new and the remote still doesn't respond, try clearing the memory and re-cloning.
8. User Tips
- Read the Manual: Many users find the cloning process easy when following the provided instructions carefully.
- Test Thoroughly: After cloning, always test the new remote to ensure it functions as expected with your device.
- Rolling Code Activation: Remember that rolling code remotes require an additional activation step with your receiver after cloning. This is a common point of confusion.
9. Warranty and Support
For any issues or further assistance, please contact the seller or refer to the product's official support channels. Keep your purchase records for warranty claims.