1. Introduction
Thank you for choosing the SANDA 3341 Digital Sports Watch. This manual provides detailed instructions for the setup, operation, and maintenance of your new watch. Please read this manual carefully to ensure proper use and to fully utilize all its features.
Figure 1: SANDA 3341 Digital Sports Watch
2. Key Features
The SANDA 3341 watch is equipped with a range of practical functions designed for active lifestyles:
- Digital Display: Clear and easy-to-read digital time display.
- Luminous Display: Press and hold the glow-in-the-dark button for a one-click light mode to see the time clearly at night.
- Multiple Alarms: Features five alarm functions, including two groups of alarms, hourly chimes, and an intermittent alarm.
- Stopwatch: Precise timing function, capable of calculating duration if a distance is specified.
- Countdown Timer: A countdown function that can be set for up to 60 minutes.
- Universal Time: Displays time across 31 cities and 29 time zones.
- Daylight Saving Time (DST): Option to set summer time and standard time.
- Water Resistance: 50 meters (5Bar) waterproof, suitable for swimming and water sports (not for diving).
- Shock-proof and Fall-proof: Designed with good seismic function for durability.
- Dual Mode Time: Free switching between 12-hour and 24-hour formats.
- Week/Calendar Display: Shows the current day and date.
- Original Battery: Equipped with a low power consumption battery for long endurance.
Figure 2: Twelve Practical Functions
3. Specifications
| Parameter | Detail | Parameter | Detail |
|---|---|---|---|
| Brand | SANDA | Watch Buckle | Stainless Steel |
| Model Number | 3341 | Watch Case | ABS Plastic |
| Movement | Electron + Quartz | Watchband | TPU Rubber |
| Battery | Original Battery | Perimeter | 186mm-231mm |
| Mirror Surface | Acrylic Mirror | Waterproof | 50m (5Bar) |
| Display Type | Digital | Case Thickness | 16mm |
| Band Width | 21-26mm | Case Shape | Round |
| Dial Diameter | 46mm | Band Length | 24cm |
| Watch Case Breadth | 46mm | Watch Case Altitude | 51mm |
| Total Length of Watch | 240mm | Watch Weight | 52g |
Note: Due to different production batches and measurement methods, specific size is subject to the actual product. Some information is for reference only.
Figure 3: Product Parameter Information
4. Initial Setup
Before using your watch, you may need to set the time, date, and other basic functions. Refer to the 'Operation Analysis' diagram for button identification.
Figure 4: Operation Analysis
4.1 Setting Time and Date
- Enter Setting Mode: Press the 'Set key' (typically top right button) to enter the setting mode. The display will usually show a flashing digit, indicating it's ready for adjustment.
- Select Item: Use the 'Mode switching' key (typically bottom left button) to cycle through different settings such as hours, minutes, year, month, day, 12/24-hour format, etc.
- Adjust Value: Use the 'Increment value' key (typically bottom right button) to increase the selected value. Hold the button to rapidly advance the value.
- Confirm and Exit: Once all settings are adjusted, press the 'Set key' again to confirm and exit the setting mode.
4.2 Setting Alarms
- Access Alarm Mode: Press the 'Mode switching' key until you reach the alarm setting interface (indicated by 'ALM' or a bell icon).
- Select Alarm: If there are multiple alarms, use the 'Mode switching' key to cycle between them.
- Set Alarm Time: Use the 'Set key' to select the hour or minute to adjust, then use the 'Increment value' key to set the desired time.
- Activate/Deactivate Alarm: A specific button (often the 'Luminous keying' or 'Increment value' button in alarm mode) will toggle the alarm ON/OFF. Look for an alarm icon on the display.
- Hourly Chime: The watch also features an hourly chime ('SIG'). This can usually be toggled ON/OFF in the alarm settings.
5. Operating Functions
5.1 Stopwatch
- Enter Stopwatch Mode: Press the 'Mode switching' key until 'SPL' or 'STW' is displayed.
- Start/Stop: Press the 'Increment value' key to start the stopwatch. Press it again to stop.
- Lap/Split Time: While the stopwatch is running, pressing the 'Set key' may record a lap or split time.
- Reset: When the stopwatch is stopped, press the 'Set key' to reset it to zero.
5.2 Countdown Timer
- Enter Countdown Mode: Press the 'Mode switching' key until 'CD' or 'TMR' is displayed.
- Set Countdown Time: Use the 'Set key' to select the time to adjust, then use the 'Increment value' key to set the desired countdown duration (up to 60 minutes).
- Start/Stop: Press the 'Increment value' key to start the countdown. Press it again to pause/resume.
- Reset: When the countdown is stopped, press the 'Set key' to reset it to the initial set time.
5.3 Luminous Display (Backlight)
To activate the backlight, press the 'Luminous keying' button (typically top left button). The display will illuminate for a few seconds, allowing you to read the time in low-light conditions.
Figure 5: Luminous Display
5.4 Universal Time
Your watch can display time for 31 cities across 29 time zones. To access and set universal time:
- Enter World Time Mode: Press the 'Mode switching' key until 'WT' or 'World Time' is displayed.
- Select City/Time Zone: Use the 'Increment value' key to cycle through the available cities/time zones.
- Set Home City: In some modes, you can designate a specific city as your 'Home City' for quick reference.
6. Care and Maintenance
6.1 Cleaning Your Watch
- Wipe the watch case and band regularly with a soft, dry cloth to remove dirt and moisture.
- For stubborn dirt, use a slightly damp cloth and mild soap, then wipe dry immediately.
- Avoid using chemical cleaners, solvents, or abrasive materials, as these can damage the watch's finish and seals.
6.2 Water Resistance
The SANDA 3341 watch is 50m (5Bar) water resistant. This means it is suitable for everyday use, showering, and swimming in shallow water. However, it is not recommended for diving or high-pressure water activities. Do not operate buttons underwater.
6.3 Battery Replacement
The watch uses an original battery designed for long endurance. When the display becomes dim or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure the water resistance seal is properly maintained.
Figure 6: ABS Transparent Case and Stainless Steel Bottom Cover
7. Troubleshooting
- Watch not displaying time/blank screen: The battery may be depleted. Replace the battery.
- Buttons not responding: Ensure the watch is not in a locked mode (if applicable). If the issue persists, a reset may be required (consult a technician if unsure).
- Time is incorrect: Re-enter the time setting mode and adjust the time and date as per Section 4.1. Check if Daylight Saving Time (DST) is correctly set.
- Water inside the watch: Immediately stop using the watch and take it to a qualified technician. Water damage is typically not covered under warranty.
8. User Tips
- Setting the Analog-Style Display: Although this is a digital watch, some users may find the analog-style hands on the display confusing. These hands are typically synchronized with the digital time and are not set independently. If the hands appear incorrect, ensure your digital time is set accurately. If the issue persists, a full reset might be needed, or consult the manufacturer's support.
- Button Feel: The metallic keying offers a simple and beautiful design. Ensure firm presses for button activation, especially when setting functions.
- Acrylic Mirror Care: The acrylic mirror is clear and durable. To maintain its clarity, avoid contact with sharp objects that could scratch it.
Figure 7: Acrylic Mirror
9. Warranty and Support
For any issues not covered in this manual or for warranty inquiries, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase.
