Insoma SGW02W Automatic Water Timer with WiFi Hub User Manual

1. Introduction

Thank you for choosing the Insoma SGW02W Automatic Water Timer with WiFi Hub. This smart irrigation system is designed to simplify your garden watering, offering remote control via a smartphone app, voice control compatibility, and flexible scheduling options. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and a thriving garden.

2. Safety Information

• Do not use the timer when air temperature is below 40℉ (4.5℃). The timer should be removed from the hose faucet and stored indoors to avoid potential frozen damage.
• Ensure the water timer is tightly attached to the faucet and hose to prevent leakage. Use a rubber washer and thread seal tape if necessary.
• Keep the WiFi Hub in a dry, indoor location.
• The best range for connection and control between the timer and the WiFi hub is within 49.2ft (15m) in an open area. Obstacles may reduce this range.
• Use only 4x AA alkaline batteries for the water timer.

3. Package Contents

Please check the package to ensure all items are present:

• Insoma Automatic Water Timer (SGW02W)
• WiFi Hub
• Timer accessories (e.g., connectors, washers)
• User Manual

4. Specifications

5. Product Overview

The Insoma SGW02W is a smart dual-outlet water timer designed for efficient garden irrigation. It connects to your home network via a dedicated WiFi Hub, allowing for remote control and smart scheduling through the Smart Life app. The timer features two independent outlets (Zone A and Zone B) that can be programmed separately.

Figure 1: Insoma Water Timer and WiFi Hub (US version shown)

Figure 2: Insoma Water Timer and WiFi Hub with US plug

6. Setup

6.1 Battery Installation (Water Timer)

1. Ensure the water timer is dry before installing batteries.
2. Locate the battery compartment on the water timer.
3. Insert 4x AA alkaline batteries, ensuring correct polarity.
4. Close the battery compartment securely.

6.2 WiFi Hub Installation

1. Plug the WiFi Hub into a standard 110-250V 50/60HZ power outlet indoors.
2. Ensure the hub is within 49.2ft (15m) of the water timer for optimal connection.

6.3 Physical Installation (Water Timer)

1. Attach the water timer securely to your outdoor faucet.
2. Connect your garden hoses to the two independent outlets (Zone A and Zone B) at the bottom of the timer.
3. Ensure all connections are tight to prevent leaks. Use provided washers or thread seal tape if necessary.

Figure 3: Water Timer connected to faucet and hoses

7. App Installation and Pairing

7.1 Download the Smart Life App

Download the 'Smart Life' app from your smartphone's app store (iOS or Android).

7.2 Connect to 2.4GHz WiFi

Ensure your smartphone is connected to a 2.4GHz WiFi network. The Insoma system only supports 2.4GHz WiFi.

7.3 Pairing the WiFi Hub and Water Timer

1. Open the Smart Life app and create an account or log in.
2. Follow the in-app instructions to add the WiFi Hub.
3. Once the WiFi Hub is added, follow the in-app instructions to add the Insoma Water Timer. The app will guide you through the pairing process.
4. You can connect up to 32 water timers to one WiFi Hub, allowing for extensive smart irrigation coverage.

Figure 4: Remote control watering via the Smart Life App

Figure 5: Building a smart irrigation system with multiple timers and a single WiFi hub

8. Operating Instructions

The Insoma Water Timer offers various watering modes and smart features through the Smart Life app.

8.1 Independent Zone Control

The timer has two independent outlets (Zone A and Zone B). Each zone can be programmed with its own unique watering schedule. You can set up to 10 programs per zone, totaling 20 programs for the entire timer.

Figure 6: Setting independent watering schedules for Zone A and Zone B

8.2 Timed Watering Mode

This mode allows you to set specific watering times. Customize the start time, water duration, and the weekly cycle (e.g., specific days of the week, odd days, even days, or every few days) to match your plants' needs.

8.3 Cyclical Watering Mode

In cyclical mode, the timer will repeat watering within a preset start and end time frame. You can define the irrigation duration and the interval time between watering cycles.

Figure 7: App interface for Timed and Cyclical Watering Modes

8.4 Manual Watering

You can initiate manual watering at any time without interrupting your preset schedules. Simply use the app to set a custom duration (from 1 minute to 23 hours 59 minutes) for immediate watering.

Figure 8: Manual watering mode in action, controlled via app

Figure 9: App interface for Manual Watering

8.5 Rain Delay

If rain is expected or occurring, you can activate the rain delay feature. This will pause your programmed watering schedule for 1 to 7 days, automatically resuming afterward. This helps conserve water and prevents overwatering.

Figure 10: Rain Delay feature in action, showing app options

Figure 11: App interface for Rain Delay settings

8.6 Voice Control

The Insoma Water Timer is compatible with Amazon Alexa and Google Assistant. Once integrated, you can use simple voice commands to turn the watering timer on or off. For example, "Alexa, open the Smart Dual Water Timer."

Figure 12: Controlling the water timer using voice commands

8.7 Watering Record

The Smart Life app allows you to check the watering history for each zone, providing details on irrigation duration and timestamps. This helps you monitor and optimize your watering habits.

9. Maintenance

• **Filter Cleaning**: The timer includes a filter to trap dirt particles. Clean the filter regularly to ensure proper water flow and replace it if worn.
• **Battery Replacement**: Replace the 4x AA alkaline batteries when the low battery indicator appears in the app or on the timer. Ensure the timer is dry when replacing batteries.
• **Winter Storage**: Before the first frost, remove the timer from the faucet and store it indoors in a dry, protected area to prevent freezing damage.

10. Troubleshooting

10.1 Timer Not Connecting to App

• Ensure your WiFi Hub is plugged in and powered on.
• Verify your smartphone is connected to a 2.4GHz WiFi network.
• Check that the WiFi Hub is within the recommended 49.2ft (15m) range of the water timer. Reduce obstacles between them if possible.
• Restart the WiFi Hub and the water timer (by removing and reinserting batteries).
• Ensure the Smart Life app is updated to the latest version.

10.2 Water Leakage

• Ensure the water timer is tightly screwed onto the faucet.
• Check the connections of the hoses to Zone A and Zone B outlets.
• Inspect all washers and O-rings for damage or improper seating. Replace if necessary.
• Apply thread seal tape to connections if leaks persist.

10.3 Timer Not Watering

• Check battery levels and replace if low.
• Ensure the water supply to the faucet is turned on.
• Verify that a watering schedule is active and correctly configured in the Smart Life app.
• Check if Rain Delay is active and pause it if necessary.

11. User Tips

• **Battery Life**: The timer operates on 4x AA alkaline batteries. While the working time is more than 6 months, it's good practice to check battery levels periodically, especially before extended periods of absence.
• **WiFi Hub Placement**: For optimal performance, place the WiFi Hub in a central location within your garden's watering area, ensuring it's protected from the elements.
• **Thread Compatibility**: The timer uses NPT thread for USA/Canada/Mexico. Ensure compatibility with your faucet.

12. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the contact information provided with your purchase or visit the official Insoma website. Keep your purchase receipt as proof of purchase.