1. Introduction
This manual provides essential information for the safe and effective operation of your CHEGIT Moving Head Beam LED Spot Light. This professional stage lighting effect is designed for various occasions including DJ setups, discos, parties, and stage performances. Please read this manual thoroughly before installation and use.
2. Safety Information
- Ensure the power supply voltage matches the specified requirements (AC110-240V 50-60HZ).
- Always connect the device to a grounded power outlet.
- Do not operate the device if the power cord is damaged.
- Avoid direct eye exposure to the light beam.
- Keep the device away from water, moisture, and extreme temperatures.
- Ensure adequate ventilation around the unit to prevent overheating.
- Only qualified personnel should perform maintenance or repairs.
3. Package Contents
- Moving Head Beam LED Spot Light Unit
- Power Cable
- User Manual (this document)
4. Specifications
| Feature | Description |
|---|---|
| Model Number | L0647 |
| Certification | CE |
| Voltage | AC110-240V 50-60HZ |
| Light Source | 1 x 30W White LED + 12 LED Light Strips |
| Total Power | 60W / 80W (depending on variant) |
| Color & Patterns | 8 Patterns + 8 Colors |
| Beam Angle | 1.5° |
| Playback Modes | Automatic Operation, Voice Control, DMX512, Master-Slave |
| Control Channels | 10/12 Channels |
| Horizontal Scan Angle | 540° |
| Vertical Scan Angle | 270° |
| Effect Dimming | 1-100% |
| Cooling System | Constant Temperature with Fan |
| Material | Aluminum Alloy + ABS |
| Packaging Size | 29.5cm x 20cm x 23cm |
| Weight | 3.2kg / 7lb |
The product is available in 60W and 80W variants, offering different power outputs. Both variants feature high brightness LED beads and strong heat dissipation for reliable performance.
Figure 1: Product Dimensions and Connection Ports
Figure 2: Product Advantages
5. Setup
5.1 Mounting
The Moving Head Beam LED Spot Light can be mounted in various positions (e.g., truss, floor) using appropriate clamps and safety cables (not included). Ensure the mounting surface or structure can safely support the weight of the fixture. The unit features 540° horizontal (Pan) and 270° vertical (Tilt) rotation, allowing for flexible positioning.
5.2 Power Connection
Connect the provided power cable to the 'POWER' input on the rear panel of the light and then to a suitable AC110-240V 50-60HZ power outlet. Ensure the connection is secure.
5.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller's output to the 'DMX IN' port on the first light. For multiple lights, daisy-chain them by connecting the 'DMX OUT' of the first light to the 'DMX IN' of the next, and so on. Terminate the last light in the chain with a DMX terminator (not included) for optimal signal integrity.
6. Operating Instructions
The light features a display panel with MENU, UP, DOWN, and ENTER buttons for navigation and setting adjustments.
6.1 Control Modes
- Automatic Operation: The light will cycle through pre-programmed shows and patterns. Use the display panel to select different auto programs.
- Voice Control (Sound Active): The light will react to sound and music, changing patterns and colors in sync with the beat. Ensure the built-in microphone is not obstructed.
- DMX512 Control: Connect to a DMX controller to gain full control over all features, including pan, tilt, color, patterns, dimming, and strobe. Refer to the DMX channel chart (usually provided with the DMX controller or available online) for specific channel functions. The light supports 10 or 12 DMX channels.
- Master-Slave Mode: Connect multiple lights via DMX cables. Set one unit as 'Master' and the others as 'Slave'. The slave units will mimic the master unit's movements and effects.
6.2 Adjusting Settings
Use the MENU button to navigate through the main settings. Use UP/DOWN buttons to change values or options, and ENTER to confirm your selection. Common settings include DMX address, control mode, and program selection.
Video 1: Demonstration of dynamic color and pattern changing effects.
Figure 3: Light in a DJ/Bar Setting
Figure 4: Real-time Display of Effects
Figure 5: Pan and Tilt Movement Capabilities
7. Maintenance
- Cleaning: Regularly clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Cooling System: Ensure the fan and ventilation openings are free from dust and debris to maintain efficient cooling.
- Inspection: Periodically check all cables and connections for wear or damage.
- Storage: When not in use, store the light in a dry, dust-free environment.
8. Troubleshooting
- No Power: Check the power cable connection to both the unit and the power outlet. Ensure the outlet is functioning.
- No Light Output: Verify the unit is powered on and not in a blackout mode. Check the selected operating mode.
- No Movement/Incorrect Movement: In DMX mode, ensure the DMX address is correctly set and the DMX signal is present. Check DMX cable connections. In Master-Slave mode, confirm one unit is set as Master and others as Slave. The unit features self-checking induction for quick reset and anti-interference ability.
- Light Flickering: Check power connections and DMX signal integrity.
9. User Tips
- This product is a true moving head light, capable of dynamic pan and tilt movements, not just a static head.
- The light operates on a wide voltage range of AC110-240V, making it suitable for various regions.
- Both 60W and 80W variants are available. The choice depends on your specific brightness and power requirements.
- For optimal beam visibility, consider using the light in environments with haze or fog.
10. Warranty and Support
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.