INSOMA Automatic Water Timer Instruction Manual

1. Introduction

Thank you for choosing the INSOMA Automatic Water Timer. This intelligent irrigation system is designed to simplify your garden and lawn watering, ensuring your plants receive optimal hydration with minimal effort. Featuring a clear LCD display, multiple watering modes, and a robust IPX5 waterproof rating, this timer is a reliable partner for your outdoor watering needs.

2. Safety Information

• For outdoor use only.
• Do not install the timer with tools. Hand tighten Only. Use of tools may damage the timer.
• Do not subject the product to extreme force and shock.
• To prevent leakage, ensure the water timer is tightly attached to the faucet and hose. Use the provided rubber washer and thread seal tape if necessary.
• In winter, please remove batteries, drain the timer, and store it indoors to prevent freezing damage.

3. Package Contents

Please check the package to ensure all items are present:

• INSOMA Automatic Water Timer (1 unit)
• Thread Seal Tape (1 roll)
• Quick Connector (1 unit)
• User Manual (1 copy)
• 3/4" Male NPT to 1/2" Female NPT Reducer Adapter (1 unit)
• 3/4" GHT Male Thread (1 unit)

4. Specifications

5. Setup and Installation

5.1 Component Overview

Familiarize yourself with the main components of your water timer:

Image: Timer Dial, Large LCD Screen, Filter Washer, Thread Reducer, Thread Seal Tape, Fitting 3/4" Faucet, Fitting 3/4" Hose, Children Lock Button, Rain Delay Button, OK Button, Manual Button.

5.2 Battery Installation

1. Locate the battery compartment on the back of the timer.
2. Open the battery cover. The cover includes a seal ring to isolate moisture.
3. Insert two (2) new 1.5V AA alkaline batteries (not included), ensuring correct polarity.
4. Close the battery cover securely.

5.3 Connecting the Timer

1. Ensure your outdoor faucet is clean and free of debris.
2. Hand-tighten the timer onto your 3/4" faucet. If your faucet is 1/2", use the provided 3/4" Male NPT to 1/2" Female NPT reducer adapter.
3. Connect your garden hose to the bottom outlet of the timer. Use the provided quick connector and thread seal tape if needed to prevent leaks.
4. Turn on your faucet fully. The timer is designed to withstand high water pressure (up to 116 psi).

6. Operating Instructions

The INSOMA water timer offers automatic, manual, and rain delay modes for flexible watering.

6.1 General Operation and Dial Settings

The timer features a central dial and four buttons (+, -, Faucet icon, OK) for programming. Rotate the dial to select the desired setting mode:

• Set Clock: Adjust the current time.
• Start Time: Set when automatic watering should begin.
• How Long: Define the duration of each watering cycle (1 minute to 23 hours 59 minutes).
• How Often: Set the frequency of watering (every 1 minute to 23 hours 59 minutes, or every 1 day to 7 days).
• AUTO: Activates the programmed automatic watering schedule.
• OFF: Turns off all watering.

Image: Turn dial to Set Clock, Start Time, How Long, How Often, Auto, Off.

6.2 Automatic Watering Mode

To set up an automatic watering schedule:

1. Rotate the dial to 'Set Clock' and set the current time using the '+' and '-' buttons, then press 'OK'.
2. Rotate the dial to 'Start Time' and set your desired watering start time, then press 'OK'.
3. Rotate the dial to 'How Long' and set the duration for each watering session (e.g., 30 minutes), then press 'OK'.
4. Rotate the dial to 'How Often' and set the frequency (e.g., every 10 hours or every 2 days), then press 'OK'.
5. Finally, rotate the dial to 'AUTO' to activate your programmed schedule. The timer will now run according to your settings.

Image: Automatic Watering Mode settings.

Image: Hour Cycle Mode and Day Cycle Mode for automatic watering.

Video: Demonstration of Automatic Watering Mode.

6.3 Manual Watering Mode

To manually water without interrupting your preset schedule:

1. Ensure the dial is set to 'AUTO'.
2. Press the 'Faucet icon' button.
3. Use the '+' and '-' buttons to set the desired manual watering duration (from 1 minute to 23 hours 59 minutes).
4. Press 'OK' to start manual watering. The timer will revert to its automatic schedule once the manual watering duration is complete.

Image: Pressing the faucet button to enter manual mode.

Image: Manual Watering Mode without interrupting preset schedules.

6.4 Rain Delay Mode

To pause your watering schedule due to rain:

1. Ensure the dial is set to 'AUTO'.
2. Long press the '+' button.
3. Use the '+' and '-' buttons to select the desired rain delay duration (1 to 7 days).
4. Press 'OK' to confirm. The timer will pause for the selected duration and automatically resume its schedule afterward.

Image: Long press '+' button to set Rain Delay mode.

Image: Rain Delay Function, pausing the preset program for 1 to 7 days.

6.5 Child Lock Function

To prevent accidental changes to your settings:

1. Ensure the dial is set to 'AUTO'.
2. Long press the '-' button. A lock icon will appear on the LCD screen, indicating the child lock is active.
3. To deactivate, long press the '-' button again until the lock icon disappears.

Image: Long press '-' button to set Children Lock mode.

Image: Child Lock Function to keep irrigation timer safe from kids and pets.

7. Maintenance

• Cleaning: Regularly clean the filter to prevent blockages and extend the timer's lifespan. Replace the filter if it shows signs of wear or damage.
• Winter Storage: Before the first frost, remove the batteries from the timer. Disconnect the timer from the faucet and hose, drain any remaining water, and store it in a dry, indoor location to prevent freezing damage.
• Battery Replacement: Replace batteries when the low battery indicator appears on the LCD screen to ensure continuous operation.

8. Troubleshooting

Q1: The LCD screen doesn't display anything when the batteries are installed.

A1: Ensure you are using new 1.5V AA alkaline batteries. Check that the batteries are properly placed in the battery box with correct polarity.

Q2: Water doesn't come on at the preset time.

A2: Check the following:

• The current clock time is set correctly.
• The 'Start Time' is set to the desired time.
• Rain delay mode is not active.
• The timer is not in 'OFF' mode.
• The batteries are not low (check the battery indicator on the LCD).
• The faucet is turned on fully.

Q3: The hose tap connection/outlet leaks.

A3: Check the following:

• The O-ring is correctly seated and not damaged in the connection to the faucet.
• The connection outlet or water pipe is not broken.
• The faucet and water pipe have compatible threads. If necessary, use the appropriate adapter (e.g., the provided reducer hex bushing) or PTFE tape to ensure a tight seal.

9. User Tips

• For optimal performance, always use high-quality 1.5V AA alkaline batteries. Rechargeable batteries may not provide sufficient voltage for consistent operation.
• The timer's connector is reinforced with 35% fiber, allowing it to withstand water pressures from 7.25 psi to 116 psi, making it suitable for various water sources.
• Installation is tool-free; hand-tightening is sufficient and recommended to avoid damage.
• This timer is versatile and can be used for gravity drip irrigation systems, garden watering, lawn sprinklers, greenhouse mist systems, and even pool filling.

10. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.