SMAEL 8105

Contents

SMAEL 8105 Digital Sports Watch User Manual

Model: 8105

1. Introduction

Thank you for choosing the SMAEL 8105 Digital Sports Watch. This manual provides detailed instructions on how to set up, operate, and maintain your watch. Please read this manual carefully to ensure proper use and to enjoy all the features of your new timepiece.

For a detailed user manual, please refer to the PDF document available at SMAEL 8105 User Manual (PDF).

2. Product Features

  • 12-Digit LCD Display: Shows Hour, Minute, Second, Month, Day, and Week.
  • Daily Alarm and Hourly Chime.
  • 12/24 Hour Format selectable.
  • Automatic Calendar.
  • EL Backlight for visibility in low light conditions.
  • 1/100 Second Chronograph (Stopwatch) with split functions.
  • Water Resistance: 50 meters (5 Bar).
  • Shock Resistant design.
  • Glow Mode.
  • Sensitive Buttons.
  • Super Long Range battery life.

Product Dimensions:

SpecificationValue
Dial Diameter46mm
Case Thickness16mm
Band Width22mm
Band Length24.5cm (Total Strap Length: 140mm-230mm)
Net Weight49g
Case MaterialPlastic (ABS)
Band Material TypePU (TPU Strap)
Clasp TypeBuckle (Stainless Steel)
Mirror SurfaceMineral Glass
MovementDigital Electronic

Note: Manual measurements may have slight errors. Please refer to the actual product for precise dimensions.

Diagram showing SMAEL 8105 watch dimensions and key features like glow mode, shockproof, 50m waterproof, stopwatch, week calendar, alarm reminder, calendar display, 12/24H system, sensitive buttons, and super long range.
Watch dimensions and feature icons.

3. Controls and Display

Your SMAEL 8105 watch features four buttons and a clear digital display to access its various functions.

Diagram of the SMAEL 8105 watch showing the location of the LIGHT (A), MODE (B), START/STOP (D), and RESET (C) buttons.
Watch buttons and their functions.
  • LIGHT (A) Button: Activates the EL backlight.
  • MODE (B) Button: Cycles through different operational modes.
  • RESET (C) Button: Used for resetting values or viewing split times.
  • START/STOP (D) Button: Used for starting/stopping functions or adjusting values.
Diagram showing the functional mode display elements: Date display, Seconds display, Week Display, Time display, Alarm clock display, Mode switching, Auxiliary adjustment, and Glow-in-the-dark buttons.
Functional mode display elements.

4. Setup and Operation

4.1. EL Backlight

In any mode, press the LIGHT (A) button to illuminate the EL backlight for approximately 3 seconds.

4.2. Mode Switching

Press the MODE (B) button to cycle through the following modes in sequence:

  1. Normal Time Display Mode
  2. Chronograph (Stopwatch) Mode
  3. Alarm Mode
  4. Time Setting Mode

4.3. Chronograph (Stopwatch) Functions

  1. From Normal Time Display Mode, press MODE (B) once to enter Chronograph Mode. The display will show '00:00:00'.
  2. Press START/STOP (D) to start the stopwatch.
  3. To pause, press START/STOP (D) again. To resume, press START/STOP (D).
  4. To record a split time (hold on), press RESET (C) while the stopwatch is running. The display will show the split time. Press RESET (C) again to return to the running stopwatch.
  5. To stop the stopwatch, press START/STOP (D).
  6. To reset the stopwatch to '00:00:00', press RESET (C) after stopping it.
  7. Press MODE (B) to exit Chronograph Mode and return to the next mode in the cycle.

4.4. Alarm Setting

  1. From Normal Time Display Mode, press MODE (B) twice to enter Alarm Setting Mode. The alarm hour will flash.
  2. Press START/STOP (D) to adjust the alarm hour. Pay attention to AM/PM if in 12-hour format.
  3. Press RESET (C) to switch to alarm minute setting. The alarm minute will flash.
  4. Press START/STOP (D) to adjust the alarm minute.
  5. Press MODE (B) to exit Alarm Setting Mode and return to Normal Time Display Mode.

4.5. Time and Date Setting

  1. From Normal Time Display Mode, press MODE (B) three times to enter Time and Date Setting Mode. The seconds will flash.
  2. Press START/STOP (D) to zero out the seconds.
  3. Press RESET (C) to move to the hour setting. The hour will flash.
  4. Press START/STOP (D) to adjust the hour. Repeatedly pressing START/STOP (D) will also toggle between 12-hour and 24-hour formats.
  5. Press RESET (C) to move to the minute setting. The minute will flash.
  6. Press START/STOP (D) to adjust the minute.
  7. Press RESET (C) to move to the month setting. The month will flash.
  8. Press START/STOP (D) to adjust the month.
  9. Press RESET (C) to move to the date setting. The date will flash.
  10. Press START/STOP (D) to adjust the date.
  11. Press RESET (C) to move to the day of the week setting. The day of the week will flash.
  12. Press START/STOP (D) to adjust the day of the week.
  13. Press MODE (B) to exit Time and Date Setting Mode and return to Normal Time Display Mode.

4.6. Alarm and Hourly Chime ON/OFF

  1. From Normal Time Display Mode, press MODE (B) twice to enter Alarm Mode.
  2. Press START/STOP (D) to toggle the Alarm (ALM) and Hourly Chime (SIG) functions ON or OFF.
  3. If the "ALM" symbol appears, the alarm function is ON. If the "SIG" symbol appears, the hourly chime function is ON. If both symbols appear, both functions are ON. If neither appears, both are OFF.
Video demonstrating the watch's backlight and alarm functions.

5. Maintenance and Care

  • Water Resistance: This watch is water-resistant to 50 meters (5 Bar), making it suitable for showering, bathing, and car washing. However, do not press any buttons while the watch is submerged in water, as this can compromise the water seal and cause damage.
  • Cleaning: Clean the watch regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then wipe dry.
  • Avoid Extreme Conditions: Do not expose the watch to extreme temperatures (hot or cold), strong magnetic fields, or harsh chemicals.
  • Battery Replacement: The watch uses a digital movement with a battery included. When the display dims or functions become erratic, it may be time for a battery replacement. It is recommended to have the battery replaced by a professional watch technician to ensure the water resistance seal is maintained.
  • Strap Care: The PU/TPU strap is durable but can be cleaned with mild soap and water. Avoid prolonged exposure to direct sunlight to prevent material degradation.
A person wearing the SMAEL 8105 watch with water splashing, illustrating its water resistance.
The watch is water-resistant, suitable for daily use and light water activities.

6. Troubleshooting

  • Display is blank or dim: The battery may be low or depleted. Replace the battery.
  • Buttons are unresponsive: Ensure the watch is not wet when pressing buttons. If the issue persists, try resetting the watch by pressing all four buttons simultaneously for a few seconds (if applicable, consult the PDF manual for specific reset procedures).
  • Time is incorrect: Follow the "Time and Date Setting" instructions to adjust the time. Ensure the 12/24-hour format is set correctly.
  • Alarm is not sounding: Check the "Alarm and Hourly Chime ON/OFF" section to ensure the alarm function is activated.
  • Water inside the watch: If water enters the watch, stop using it immediately and take it to a professional for inspection and repair to prevent further damage.

7. User Tips

  • Water Resistance Reminder: While the watch is 50m water-resistant, always remember to avoid pressing buttons underwater to prevent water ingress.
  • Strap Replacement: If your watch strap breaks or needs replacement, it is recommended to contact the seller or manufacturer for compatible replacement parts.
  • Battery Type: This digital watch typically uses a standard button cell battery. For specific battery model information, please refer to the PDF manual or consult a professional watch repair service.
  • Heart Rate Monitoring: Please note that this is a digital sports watch with basic timekeeping and stopwatch functions. It does not include advanced health monitoring features like heart rate measurement.
  • Date Format: The watch displays the date in a Month-Day format (e.g., 10-26). While you can set the month and day independently, the display format is fixed.

8. Warranty and Support

For warranty information and customer support, please refer to the terms and conditions provided by your retailer or contact SMAEL customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 SMAEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.