BUTURE 6000A Jump Starter Portable Power Bank User Manual

1. Product Overview

The BUTURE 6000A Jump Starter is a versatile portable power bank designed to provide emergency jump-starting for vehicles, as well as charging for various electronic devices. It features a high peak current, compatibility with a wide range of engines, and multiple safety protections.

2. What's in the Box

Carefully unpack the box and ensure all items are present and in good condition. If any items are missing or damaged, please contact customer support.

• Beta04 Jump Starter Unit
• Jumper Cables (with heavy-duty clamps)
• USB Quick Charging Cable
• USB-C Quick Charging Cable
• DC Cigarette Lighter Adaptor
• EVA Carrying Case
• User Manual (this document)

3. Setup and Initial Charging

3.1 Initial Charging

Before first use, it is recommended to fully charge the jump starter. The unit supports PD 65W fast charging.

• Connect the provided USB-C Quick Charging Cable to the USB-C (IN/OUT) port on the jump starter.
• Connect the other end of the USB-C cable to a 65W wall charger (not included).
• The 3.3-inch LED screen will display the charging status.

The device can charge from 0% to 80% in approximately 1 hour with a 65W wall charger. A 5-minute recharge from 0% can provide enough power for an emergency jump start.

3.2 Understanding the LED Screen

The 3.3-inch informative LED screen provides real-time operational status, battery level, and indicates possible errors at a glance.

4. Operating Instructions

4.1 Jump Starting Your Car

Follow these steps to safely jump start your vehicle:

1. Step 1: Insert the Clamp Plug. Plug the jumper cable connector firmly into the jump starter's port. Ensure a secure connection.
2. Step 2: Connect the Clamps. Attach the red (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal. Ensure the clamps make good contact with the battery terminals.
3. Step 3: Start the Vehicle. Return to your vehicle and start the engine. If the car does not start immediately, wait 30 seconds and try again.
4. Step 4: Disconnect. Once the car starts, immediately remove the jumper cables from the car battery, then disconnect the cable from the jump starter.

4.2 Force Start Function (Manual Override)

If your car battery is completely flat and the jump starter does not automatically detect it, you can use the force start function. This function bypasses some safety checks and should be used with caution.

• Connect the jumper cables to the jump starter and then to the car battery as described in Section 4.1.
• Press and hold the 'Force Start' button (or equivalent, refer to device markings) on the jump starter until the indicator light changes or the screen confirms 'Force Start' mode.
• Attempt to start your vehicle.
• Once the car starts, immediately disconnect the cables.

4.3 Using as a Portable Power Station

The BUTURE Jump Starter can charge multiple devices simultaneously through its various output ports.

• USB-A Outputs (18W): Use the two USB-A ports to charge smartphones, tablets, and other USB-powered devices.
• USB-C (IN/OUT) (65W): This port can be used for both charging the jump starter and fast charging compatible devices.
• 12V DC Output (160W): Use the 12V DC port with the provided DC cigarette lighter adaptor to power 12V accessories like car vacuum cleaners or portable air compressors.

4.4 Emergency Lights

The jump starter is equipped with a 600 lumens emergency light with multiple modes:

• Bright Flashlight: For general illumination.
• Emergency Strobe (White): To attract attention.
• Warning Strobe (Orange): Can function as a warning triangle for roadside emergencies.
• Important SOS: For signaling distress.

To cycle through the light modes, press the flashlight button (refer to device markings for exact button location).

5. Maintenance

• Storage: Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures.
• Charging: For optimal battery life, recharge the unit every 3-6 months, even if not in use, to maintain a charge level above 50%.
• Cleaning: Wipe the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamps: Ensure the heavy-duty clamps are clean and free of corrosion before and after each use.

6. Troubleshooting

6.1 Common Issues and Solutions

• Unit not turning on: Ensure the unit is charged. If the battery is completely depleted, charge it for at least 5 minutes before attempting to use.
• Car not starting after jump attempt: Check that the clamps are securely connected to the correct battery terminals. Ensure the jump starter has sufficient charge. If the battery is completely flat, use the Force Start function.
• Error message on LED screen: Refer to the specific error code displayed on the 3.3-inch LED screen and consult the full user manual (if available) for detailed explanations. Common errors might indicate reverse polarity, short circuit, or over-temperature.

6.2 Safety Protections

The BUTURE Jump Starter is equipped with 10 types of safety protections to ensure safe operation:

• Over-charge Protection
• Over Current Protection
• Short Circuit Protection
• Over Heat Protection
• Extreme Temperature Protection
• Over-voltage Protection
• Reverse Connection Protection
• Low Voltage Protection
• Over-load Protection
• Spark-proof Protection

7. Specifications

8. Warranty and Support

The BUTURE 6000A Jump Starter comes with a 24-month standby period, indicating its durability and reliability.

For technical support, warranty claims, or any questions regarding your product, please contact the seller or manufacturer directly through their official channels. Please have your purchase information and product model (Beta04) ready when contacting support.

9. User Tips

• Charge Before First Use: Although the unit may arrive with some charge, it is best practice to fully charge it before its initial use to ensure maximum performance and battery longevity.
• Regular Recharging: To maintain the battery's health and ensure it's ready for emergencies, recharge the jump starter every few months, even if it hasn't been used.
• Secure Connections: Always ensure the jumper cable clamps are firmly attached to the correct battery terminals to prevent sparks and ensure an effective jump start.
• Check Compatibility: While powerful, always confirm your vehicle's engine size is within the jump starter's specified limits (All Gas & up to 12.0L Diesel) before use.