Introduction
The VAORLO 1200Mbps WiFi USB Adapter is a high-speed, dual-band wireless network adapter designed to provide fast and stable internet connectivity for your PC or laptop. Featuring four external antennas and USB 3.0 connectivity, it supports both 2.4GHz (up to 300Mbps) and 5GHz (up to 867Mbps) frequency bands, offering a combined transmission rate of 1200Mbps. This adapter is driver-free for most Windows systems, ensuring a quick and easy setup process.
Package Contents
Please check the package for the following items:
- 1x VAORLO 1200Mbps WiFi USB Adapter
Setup Guide
1. Hardware Installation
There are two primary ways to connect your WiFi USB Adapter:
- Direct Connection: Plug the WiFi USB Adapter directly into an available USB port on your computer.
- Using a USB Extension Cable Base (Optional): If you have a USB extension cable base (purchased separately), connect the adapter to the base, and then connect the base to your computer's USB port. This is particularly recommended for desktop computers, where connecting to a rear USB 3.0 port often provides more stable power and performance compared to front ports.
Note: For desktop computers, it is highly recommended to connect the adapter to a USB 3.0 port on the back of the computer case for optimal power supply and performance.
The WiFi USB Adapter connected to a computer.
2. Driver Installation (Driver-Free)
This adapter is designed for driver-free installation on most Windows operating systems (Windows XP/7/8/8.1/10/11). The driver is built-in and should install automatically upon plugging the device into your computer.
- Plug the WiFi USB Adapter into your computer's USB 3.0 port.
- Open "This PC" or "My Computer". A new "CD drive (E:) Realtek" or "Wireless" may appear.
- Double-click to open this [CD drive].
- Click [Install] to automatically install the driver. The installation interface will disappear once completed.
- It is recommended to restart your computer after the installation is complete to ensure all changes take effect.
Video demonstrating the driver installation and WiFi connection process.
Visual guide for driver installation, highlighting the driver-free aspect.
3. Network Connection Settings
Once the driver is successfully installed, you can connect to a wireless network:
- Click the "WIFI logo" (wireless network icon) in the lower right corner of your computer's Task Bar.
- A list of available wireless networks will appear. Select the desired network.
- Click "Connect" and enter the network password if prompted.
- Once connected, the network icon will change to indicate a successful connection.
Illustration of dual-band high-speed capabilities (2.4G at 300Mbps, 5G at 867Mbps).
Operation
1. Checking Network Status
After successfully connecting to a network, the computer system icon will change to indicate an active connection. You can right-click this icon and select "Open Network and Internet Settings" to view detailed network information and manage your connections.
2. WiFi Hotspot Sharing
The WiFi USB Adapter can be used to share your computer's internet connection as a WiFi hotspot. However, the adapter itself does not include a soft AP launch driver. To enable the "WIFI hotspot function," you will need to use third-party applications such as 360, WiFi Sharing Master, or other similar APPs.
The adapter enabling WiFi hotspot sharing from a laptop.
Specifications
| Feature | Specification |
|---|---|
| Product Name | VAORLO 1200Mbps WiFi USB Adapter |
| Brand Name | VAORLO |
| Model Name | 1200Mbps WiFi USB Adapter / Wifi USB Network Card |
| Interface Type | USB 3.0 |
| Wireless Communication Standard | 802.11.ac |
| Wireless Protocol | 802.11n, 802.11ax (802.11ax), 802.11a/g, 802.11ac |
| Frequency Band Class | Dual-Band (2.4G & 5G) |
| Wi-Fi Supported Frequency | 2.4G & 5G |
| Transmission Rate | 1200Mbps (2.4G: 300Mbps + 5G: 867Mbps) |
| Antenna | 4 External Antennas (180-degree rotating design) |
| Heat Dissipation | Support (Heat dissipation hole design) |
| Supported Operating Systems | Windows XP/7/8/8.1/10/11 |
| Application | Laptop, PC |
| Product Size | 27 x 80 x 71mm |
| Certification | CE |
Product dimensions and specifications overview.
Maintenance
To ensure the longevity and optimal performance of your VAORLO WiFi USB Adapter, please follow these maintenance guidelines:
- Proper Handling: Avoid dropping or subjecting the adapter to strong impacts.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the exterior of the adapter. Do not use liquid cleaners or solvents.
- Antenna Care: The four external antennas are designed for 180-degree rotation. Handle them gently to avoid damage.
- USB Port: Always insert and remove the adapter carefully from the USB port to prevent damage to both the adapter and your computer's port.
Troubleshooting
If you encounter issues with your WiFi USB Adapter, try the following solutions:
Common Issues & Solutions:
- Adapter Not Detected:
- Try plugging the adapter into a different USB port on your computer.
- For desktops, ensure it's connected to a rear USB 3.0 port.
- Restart your computer.
- Driver Installation Failure:
- Ensure your operating system is one of the supported Windows versions (XP/7/8/8.1/10/11).
- Temporarily disable any antivirus software during installation, then re-enable it.
- Manually run the installer from the virtual CD drive if it doesn't auto-launch.
- Poor Signal Strength or Slow Speed:
- Ensure the adapter's antennas are positioned optimally (e.g., upright or angled towards your router).
- Move the computer closer to your wireless router or access point.
- Check for physical obstructions (walls, large metal objects) between the adapter and the router.
- Ensure you are connected to the 5GHz band for higher speeds, if your router supports it and your device is within range.
- Verify that your computer's USB port is USB 3.0 for optimal transmission rates.
- Cannot Connect to WiFi Network:
- Double-check the WiFi password for accuracy.
- Restart your wireless router.
- Ensure the WiFi network is broadcasting and visible.
- Not Working on Linux:
- The adapter officially supports Windows operating systems. Linux support is not guaranteed and may require manual driver compilation or specific distributions.
User Tips
- For optimal performance, especially on desktop PCs, always use a rear USB 3.0 port. Front USB ports may not provide sufficient power.
- If you experience intermittent connections, try adjusting the angle of the adapter's four external antennas. Their 180-degree rotation allows for flexible positioning to improve signal reception.
- While the adapter is driver-free for Windows, a quick restart after the initial plug-in and driver installation can help ensure system stability and full functionality.
Support & Warranty
For further assistance or detailed information, please refer to the official user manual PDF:
If you require technical support, please contact your retailer or refer to the product's official support channels.
