1. Introduction and Overview
The Espumoso K204 is a high-performance 3-inch Bi-LED Laser Projector Headlight Bulb designed to significantly enhance vehicle lighting. Featuring a double hyperboloid lens, this headlight maximizes light utilization and ensures an evenly distributed, bright, and long-range beam. Its advanced design integrates both LED and laser technology for superior illumination and visibility, making night driving safer and more comfortable.
Key advantages include:
- High Efficiency: Double hyperboloid lens increases light utilization and reduces energy waste.
- Uniformity: Precisely controls light distribution for even illumination in the target area.
- Ease of Control: Lens design allows for precise control over light direction and intensity.
- High Brightness: Focuses light into a small area, increasing brightness and visibility by over 500% compared to other headlights.
- Enhanced Appearance: Modern design improves the aesthetic of vehicle headlights.

2. Setup and Installation
The K204 headlight is designed for non-destructive installation and is compatible with various headlight sockets including H4, 9005, 9006, and H7, using the provided adapters. It features a built-in driver for simplified wiring.
2.1. Compatibility
Ensure your vehicle's headlight housing can accommodate a 3-inch projector lens. Verify the correct adapter (H4, 9005, 9006, H7) for your vehicle's existing headlight socket.

2.2. Wiring
The K204 features a built-in driver. Connect the headlight to your vehicle's electrical system according to the wiring instructions provided with your specific vehicle model. Typically, this involves connecting positive and negative wires, along with control wires for low and high beams. If you are unsure about the wiring, especially for specific connections like the black wire, it is highly recommended to consult a professional auto electrician to ensure correct and safe installation.
2.3. Installation Steps (General)
- Remove your vehicle's existing headlight bulb.
- Select the appropriate adapter ring (H4, 9005, 9006, H7) for your vehicle.
- Mount the K204 projector into the headlight housing, securing it with the chosen adapter.
- Connect the wiring harness from the K204 to your vehicle's headlight wiring.
- Test the low beam, high beam, and laser functions to ensure proper operation.
- Adjust the headlight aim as necessary for optimal road illumination without blinding oncoming traffic.
For a visual guide on the product, refer to the video below:
3. Operating Instructions
The Espumoso K204 headlight offers multiple lighting modes for different driving conditions:
- Low Beam: Provides a clear and wide beam with an even road paving effect, suitable for regular driving.
- High Beam: Offers a focused beam with a long range for maximum visibility on dark roads.
- Low Beam + Laser: Combines the low beam with an additional laser light for enhanced penetration and brightness.
- High Beam + Laser: Integrates the high beam with the laser for the most powerful and far-reaching illumination.
Switch between these modes using your vehicle's standard headlight controls. The integrated laser lens provides super penetration, making the beam brighter and wider, increasing visibility and irradiation distance for improved safety.


4. Maintenance
The Espumoso K204 headlight is designed for durability and minimal maintenance.
- Waterproof Design: With an IP68 rating, the headlight is highly resistant to water and dust, making it suitable for extreme weather conditions like rain, snow, and fog.
- Temperature Control: A built-in intelligent temperature control system prevents over-temperature damage, ensuring a long service life.
- Heat Dissipation: The unit features an aviation aluminum heat dissipation structure, fin-shaped design, and an integrated twin-shaft turbo fan (8000 RPM) for efficient cooling.
Regularly inspect the headlight lenses for dirt or debris and clean them gently with a soft cloth and mild cleaning solution to maintain optimal light output. Avoid using abrasive cleaners that could scratch the lens surface.



5. Troubleshooting
If you encounter issues with your Espumoso K204 headlight, consider the following:
- No Light Output: Check all electrical connections to ensure they are secure and properly insulated. Verify that the vehicle's fuse for the headlights is intact.
- Flickering Light: This could indicate an unstable power supply or a loose connection. Inspect wiring and connections. Ensure your vehicle's electrical system is providing stable 12-36V.
- Incorrect Beam Pattern: Re-check the installation of the projector within the housing. Ensure it is seated correctly and the aiming is properly adjusted.
- Dim Light: Ensure the lens is clean and free from dirt or condensation. Verify that the headlight is receiving adequate power.
If troubleshooting steps do not resolve the issue, please contact customer support for further assistance.
6. Specifications
| Feature | Specification |
|---|---|
| Model | K204 |
| Size | 3.0 Inch |
| Driver | Built-in |
| Color Temperature | 6000K |
| Power (Low Beam) | 40W/piece |
| Power (High Beam) | 70W/piece |
| Lumen (Low Beam) | 11100LM (3 meters test) |
| Lumen (High Beam) | 28000LM (3 meters test) |
| LED Chips (Low Beam) | 6 LED chips |
| LED Chips (High Beam) | 6 LED chips + 2/3 Hot Spot LED chips |
| Voltage | 12-36V |
| Safety Performance | IP68 Waterproof |
| Service Life | 50,000 hours |
| Certification | ECE |
| Origin | Mainland China |


7. User Tips
- Motorcycle Installation: While designed for cars, some users inquire about motorcycle installation. Always verify the physical fitment and electrical compatibility with your specific motorcycle model before attempting installation. Professional installation is recommended for motorcycles to ensure safety and proper function.
- Wiring Assistance: If you are unsure about specific wiring connections, such as identifying the purpose of each wire (e.g., the black wire), it is best to consult a qualified auto electrician. Incorrect wiring can damage the product or your vehicle's electrical system.
- Optimal Beam Alignment: After installation, ensure the headlights are properly aimed. Incorrect aiming can reduce visibility for you and create glare for other drivers. Refer to your vehicle's manual or a professional for proper headlight alignment procedures.
- Regular Cleaning: Keep the lens surface clean from dirt, dust, and road grime to maintain maximum light output and clarity.
8. Warranty and Support
For any questions, technical support, or warranty claims regarding your Espumoso K204 headlight, please contact the seller directly. Keep your purchase records handy when reaching out for support.
The product may be eligible for free returns within 90 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.





