TOWILD CL500 Urban Mini

Contents

TOWILD CL500 Urban Mini Bicycle Light Instruction Manual

Model: CL500 Urban Mini | Brand: TOWILD

1. Introduction

The TOWILD CL500 Urban Mini Bicycle Light is a compact, lightweight, and powerful headlight designed for cycling, especially suitable for Brompton folding bikes. It features 800 lumens maximum output, IPX6 waterproofing, Type-C charging, and intelligent sensing capabilities for enhanced safety and convenience.

2. Safety Information

  • Do not shine the light directly into eyes.
  • Keep the light away from flammable and explosive materials.
  • The waterproof rating is IPX6. Do not immerse the bicycle light in water.
  • Ensure the USB glue plug is securely closed to maintain waterproof integrity.
  • Place the bicycle light correctly and keep it out of reach of children to prevent accidents.

3. Package Contents

Verify that all items are present in your package:

Package contents of TOWILD CL500 Urban Mini Bicycle Light

Image: Contents of the TOWILD CL500 Urban Mini Bicycle Light package.

Package List
ItemQuantity
Urban Mini Light1
AS65 Bracket1
Gopro Mount1
TYPE-C Cable1
Remote Controller (Standard)1
4mm Hex Wrench1
Pad1
3mm Hex Wrench1
Manual1
Hex Socket Screws (long/medium/short)3
Color Box1

4. Specifications

Product parameter table for Urban Mini bike light, AS65 Bracket, and ALC-01 Wireless Controller

Image: Detailed product parameters including dimensions, weight, and performance.

Product Parameters
ParameterUrban Mini Bike LightAS65 BracketALC-01 Wireless Controller
NameUrban mini bike lightAS65 BracketALC-01 Wireless Controller
MaterialAluminum alloyAluminum alloyHigh toughness engineering plastics
CraftMatte blackN/AN/A
Weight (without accessories)96g20g12.6g
Size (L*W*H)69.5*31*31mm72.3*13*15mm45*33.5*15mm
Battery1100mAh 21700 lithium batteryN/AN/A
Charging PortType-CN/AN/A
Waterproof LevelIPX6N/AN/A
Impact Resistant1.2mN/AN/A
Mounting PlacementHandlebar, Front fork head or cross holeN/AN/A
Applicable Bike ModelBrompton folding bikes and most folding bikesN/AN/A

Note: The above battery values are approximate and tested in a laboratory with a 1100mAh lithium-ion battery. Actual performance may vary based on lighting and usage environment.

Light Modes and Endurance
ModeLuminanceEndurance Time
General Mode
High500 lumens1h 30min
Medium200 lumens3h 20min
Low100 lumens6h 30min
Warning Mode
Night Warning200 lumens7h
Day Warning400 lumens8h
Special Mode
TURBO (using remote)800 lumensN/A

5. Setup

5.1 Mounting the Light

The CL500 Urban Mini light can be installed on the front fork head or cross hole of your bicycle. It is specifically designed for Brompton folding bikes and is compatible with most folding bikes on the market.

Diagram showing mounting bracket dimensions and installation for Brompton and other fork mounts

Image: Mounting bracket dimensions and installation guide for Brompton and other fork mounts.

Use the provided AS65 bracket, screws, gaskets, and nuts to secure the light to your desired mounting placement. Refer to the diagram for proper assembly.

Example of the bicycle light installed on a bike

Image: Visual representation of the light installed on a bicycle.

5.2 Remote Controller Pairing

To pair the wireless remote controller with the light:

  1. Ensure the light is powered on.
  2. Long press and hold the switch on the light for 3 seconds to enter the pairing state. The main light will flash, and the button indicator light on the remote will turn red.
  3. While in pairing state, long press any button on the remote controller until the pairing light on the remote goes out. This indicates successful pairing.
Diagram illustrating the remote control pairing process

Image: Steps for pairing the wireless remote control.

6. Operating Instructions

6.1 Power On/Off and Mode Switching

Diagram showing button functions for power, mode switching, and intelligent/manual modes

Image: Button functions for light operation.

  • Power On/Off: Long press the main switch on the light for 0.5 seconds to turn on, and 0.8 seconds to turn off.
  • Change Gear (Brightness/Mode): Click the main switch to cycle through the available light modes (High, Medium, Low, Night Warning, Day Warning).
  • Extreme Bright Switch: For one-key extreme bright, long press the designated button on the remote to enter the highest brightness (800 lumens) and release to return to the previous gear.
  • Switching between Smart and Manual Modes: When the power is off, long press the main switch for 3 seconds to switch between the intelligent mode and manual mode. The main light will flash once to indicate successful conversion. The indicator light will be blue in intelligent mode and green in manual mode.

6.2 Intelligent Mode (Vibration Sensor)

In intelligent mode, the lights will automatically turn off after being left idle for 120 seconds. The lights will automatically turn on again when detecting vibration (movement).

6.3 Remote Control Usage

  • The remote control can be used to switch between warning and lighting modes.
  • The remote control can turn on the lights within 1 hour of the light being manually turned off.
  • After 1 hour of inactivity, the indicator light on the remote stops flashing, and the remote control cannot control the light. The light needs to be turned on manually again.
  • In manual mode, the main light is always on. If the light is turned off in manual mode, it cannot be turned on with the remote controller, and there is no standby mode.
Diagram explaining remote control functionality and limitations

Image: Remote control operational details and mode behavior.

6.4 Power Display

Diagram showing power display indicators for intelligent and manual modes

Image: Power indicator lights for different battery levels in intelligent and manual modes.

Power Indicator Status
Battery LevelIntelligent Mode IndicatorManual Mode Indicator
100-30%Blue light always onGreen light always on
29-10%Blue light flashingGreen light flashing
1-9%Red and blue alternatively flashingRed and green alternatively flashing

7. Charging

The CL500 Urban Mini uses a Type-C charging port. Please use the provided charging cable and ensure the input is 5V 1A-2A. Using other cables or fast chargers may damage the light's battery and void the warranty.

Image showing Type-C charging with various power sources

Image: Type-C charging compatibility with laptop, car charger, and power bank.

7.1 Charging Status Indicators

Image showing charging status indicators

Image: Visual guide for charging status.

  • Charging: The indicator light will flash red.
  • Fully Charged: The indicator light will be solid green (or blue, depending on mode).

8. Maintenance

  • Battery Care: If the light is not used for an extended period, charge it every three months to maintain battery health.
  • Waterproofing: The light has an IPX6 waterproof rating, meaning it can withstand heavy rain or strong water splashes. Always ensure the USB glue plug is tightly closed to prevent water ingress. Do not submerge the light in water.
  • Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Storage: Store the light in a cool, dry place away from direct sunlight and extreme temperatures.
Image demonstrating IPX6 waterproof capability

Image: The light's IPX6 waterproof rating, capable of withstanding heavy rain or strong water splashes.

9. Troubleshooting

  • Light not turning on: Ensure the battery is charged. If using the remote, check if it's within the 1-hour active window after manual turn-off. If not, turn on manually.
  • Remote control not responding: If more than 1 hour has passed since the light was manually turned off, the remote will not control it. Turn the light on manually. Ensure the remote is paired correctly.
  • Charging issues: Use only the provided Type-C cable and a 5V 1A-2A charger. Avoid fast chargers, as they can damage the battery.
  • Light unexpectedly turning off in Intelligent Mode: This is normal behavior. The light turns off after 120 seconds of no vibration and will reactivate upon movement.

10. User Tips

  • Brightness vs. Battery Life: While the 800 lumens Turbo mode is powerful, it consumes battery quickly. For longer rides, utilize the High (500 lumens) or Medium (200 lumens) modes.
  • Intelligent Mode for Commuting: The vibration sensor in intelligent mode is excellent for stop-and-go city riding, conserving battery when stationary and reactivating automatically.
  • Remote Control Convenience: Keep the remote control easily accessible on your handlebar for quick mode changes without taking your hands off the grips.

11. Warranty and Support

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the TOWILD customer service directly. Keep your proof of purchase for warranty validation.

© 2023 TOWILD. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.