RETEVIS RT15

Contents

Retevis RT15 Mini USB Portable Two Way Radio Instruction Manual

Model: RT15

1. Introduction

The Retevis RT15 is a compact and lightweight portable two-way radio designed for easy one-handed operation and reliable communication. Featuring high-quality batteries for extended call times and a convenient Mini USB charging jack, it supports multiple charging methods. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your RT15 radio.

Front view of the Retevis RT15 Mini USB Portable Two Way Radio

Figure 1: Retevis RT15 Front View

2. Package Contents

Please check the contents of your package. Depending on the package option purchased, the items may vary. A typical package includes:

  • RT15 Two Way Radio
  • 1000mAh Li-ion Battery
  • Belt Clip
  • USB Charge Cable
  • Adapter (appropriate for your country)
  • User Manual
  • Optional: Earpiece(s)
  • Optional: Programming Cable
Contents of a typical Retevis RT15 package including radio, battery, belt clip, USB cable, adapter, and manual.

Figure 2: Typical Package Contents

3. Product Overview

Familiarize yourself with the radio's components and controls:

Diagram showing the MIC/Speaker Port, USB charging port, PTT button, Monitor button, and Key Lock button on the side of the Retevis RT15 radio.

Figure 3: Side View with Button Functions

Close-up of the USB charging port on the Retevis RT15 radio.

Figure 4: USB Charging Port

Image of the belt clip accessory for the Retevis RT15 radio.

Figure 5: Belt Clip

4. Setup

4.1 Battery Installation

  1. Remove the battery cover from the back of the radio.
  2. Insert the 1000mAh Li-ion battery into the compartment, ensuring the contacts align.
  3. Replace the battery cover, pressing firmly until it clicks into place.
Image showing the back of the radio with the battery compartment and the 1000mAh Li-ion battery.

Figure 6: Battery Installation

4.2 Attaching the Belt Clip

  1. Align the belt clip with the designated slots on the back of the radio.
  2. Slide the clip downwards until it locks securely into position.
Image showing how to attach the belt clip to the radio.

Figure 7: Attaching the Belt Clip

5. Operation

5.1 Power On/Off

Press and hold the power button (labeled with a circle and vertical line) located on the front of the radio to turn the device on or off.

5.2 Channel Selection

Use the 'CH+' and 'CH-' buttons on the front panel to cycle through the available channels. The radio supports up to 16 storage channels.

5.3 Transmitting and Receiving (PTT)

To transmit, press and hold the Push-To-Talk (PTT) button on the side of the radio. Speak clearly into the microphone. Release the PTT button to receive.

5.4 Monitoring

Long press the 'Monitor' button (located below the PTT button) to temporarily disable squelch and listen for weak signals on the current channel.

5.5 Key Lock

Long press the 'Key Lock' button (located below the Monitor button) to lock or unlock the radio's keys, preventing accidental changes to settings.

5.6 VOX (Voice Operated Exchange)

The VOX function allows for hands-free transmission. When activated, the radio will transmit automatically when it detects your voice. Refer to the detailed user manual for activation and sensitivity settings.

5.7 Scanning

The scanning feature allows the radio to automatically scan through programmed channels to find active conversations. Consult the full user manual for instructions on enabling and configuring scanning.

5.8 TOT (Time-Out Timer)

The Time-Out Timer limits the duration of a transmission to prevent a single user from occupying a channel for too long.

5.9 Busy Channel Lockout

This feature prevents transmission on a channel that is already in use, avoiding interference.

5.10 CTCSS/DCS

The radio supports 50 CTCSS (Continuous Tone-Coded Squelch System) and 208 DCS (Digitally Coded Squelch) codes, allowing for private group communication and filtering out unwanted conversations.

Video 1: Retevis RT15 Product Demonstration and Basic Operation

6. Charging

The Retevis RT15 features a Mini USB charging port, offering versatile charging options:

  • Computer: Connect the USB charge cable to your computer's USB port.
  • Power Bank: Use a power bank for on-the-go charging.
  • Car Charger: Charge conveniently in your vehicle with a compatible car charger adapter.
  • Wall Adapter: Use the provided adapter and USB cable to charge from a standard wall outlet.

The radio's 1000mAh battery provides approximately 8-10 hours of continuous use and can last longer with the power-saving function enabled.

Diagram illustrating various convenient charging methods for the Retevis RT15, including computer, power bank, car charger, and adapter.

Figure 8: Convenient Charging Methods

Diagram showing the long battery life of the 1000mAh battery, with stand-by time of 3 days, typical use of 1-2 days, and continuous use of 8-10 hours.

Figure 9: Battery Life Overview

7. Specifications

AttributeValue
Brand NameRETEVIS
Model NumberRT15
Output Power (w)0.5w-3w
Battery Capacity (mAh)1000
Waterproof / Water-ResistantNo
Battery IncludedYes
MaterialABS
Storage Channel16
Frequency Range446MHz
Dimensions136x59x21mm
Walkie Talkie TypePortable
Is_DisplayNo
Maximum Range1.5km-3km
OriginMainland China
CertificationCE, FCC
Antenna ConfigurationIntegrated antenna
Audio ConnectorCompatible with 2 pin K plug accessories
Antenna ConnectorFixed
Usable programming cableC9018A/C9055A

Note: Range specifications are approximate and depend on environmental conditions and obstacles.

Diagram illustrating the communication range of the Retevis RT15 in different environments: 1-3 KM in open areas, 0-1.2 KM in city areas, and 1-20 floors in building offices.

Figure 10: Dependable Coverage

8. Troubleshooting

  • No Power: Ensure the battery is correctly installed and fully charged.
  • Cannot Transmit or Receive: Check that the radio is powered on, on the correct channel, and within range of other radios. Verify the PTT button is functioning.
  • Poor Sound Quality: Ensure the microphone and speaker ports are clear of debris. Check for strong interference sources.
  • Short Communication Range: Obstacles like buildings and dense foliage can significantly reduce range. Move to a more open area if possible.
  • Radio Not Charging: Verify the USB cable and adapter are properly connected and functional. Check the charging port for any damage.

9. User Tips

  • Frequency Programming: The RT15 is typically set to FRS frequencies by default. If you need to change frequencies (e.g., to PMR446), you will require a programming cable (C9018A/C9055A) and third-party software. Contact customer service for assistance with software.
  • Optimal Range: For best communication range, operate in open areas with minimal obstructions. High buildings and dense urban environments will reduce effective range.
  • Battery Care: To prolong battery life, avoid overcharging and fully discharge the battery periodically before recharging.

10. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the radio in a cool, dry place when not in use. Remove the battery if storing for extended periods.
  • Avoid Extreme Conditions: Do not expose the radio to extreme temperatures, direct sunlight, or excessive moisture. The radio is not waterproof.
  • Antenna Care: The antenna is integrated. Avoid bending or damaging it, as this can affect performance.
Image depicting the strong and durable shell of the Retevis RT15 radio, with debris around it suggesting impact resistance.

Figure 11: Strong Shell Design

11. Warranty & Support

RETEVIS offers a 1-year warranty for the radio unit and 3 months for accessories. For technical support or warranty claims, please contact the official RETEVIS store or authorized service centers. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.