NEWBOLER LIG010

Contents

NEWBOLER 10000 Lumen Bicycle Headlight Instruction Manual

Model: LIG010

1. Product Overview

The NEWBOLER LIG010 is a high-performance bicycle headlight designed for enhanced visibility and safety during cycling. It features a powerful 10000 lumen output, a durable aluminum alloy body, and a large capacity rechargeable battery with power bank functionality. The light offers multiple modes and a digital display for monitoring usage time and battery percentage.

NEWBOLER 10000 Lumen Bicycle Headlight with mounting bracket
The NEWBOLER LIG010 bicycle headlight, showcasing its design and mounting bracket.

2. Specifications

FeatureDetail
ModelLIG010-10000mAh
Body MaterialAluminum Alloy / Aluminum plastic shell
Light Modes4 modes: Low Beam, High Beam On, High Beam Full Beam, Flashing
Waterproof LevelIPX5
LumensMaximum 10000 lumens
Battery CapacityApproximately 10000 mAh (2 x 21700 batteries)
Charging TimeApproximately 8 hours
Working Hours4.5 - 10.5 hours (depending on mode)
Voltage3.7V
Power Bank FunctionYes (Type-C Reverse Charging)
Intelligent SensingYes
Support Dimmer2 - 4 Files
Mounting PlacementHandlebar
CertificationCE
Light Beads8 Pcs P9 Lamp Beads
Product size and detailed specifications table
Detailed product dimensions and specifications.

3. Setup and Installation

The NEWBOLER LIG010 bicycle headlight offers versatile installation options to suit various handlebar configurations.

Mounting Instructions:

  1. Step 1: Place the base of the bracket over your bicycle handlebar. Use appropriate spacers if needed to ensure a snug fit.
  2. Step 2: Adjust the position of the base on the handlebar and tighten the base screws securely.
  3. Step 3: Install the first two brackets onto the base in the same manner, ensuring they are firmly attached.
  4. Step 4: Push the bicycle light unit into place on the installed base. Tighten the screws to fixate the light securely.
Four-step diagram showing how to install the bicycle light onto the handlebar
Step-by-step guide for handlebar installation.

Bracket Types:

The light supports different installation types:

  • Normal bracket: Standard handlebar mount.
  • Adapter bracket: For specific mounting needs.
  • Hoisting bracket: Allows for under-bar mounting.
Diagram showing three types of installation brackets: normal, adapter, and hoisting
Various bracket options for flexible mounting.
Close-up of the double aluminum alloy brackets and the light's features
The robust double aluminum alloy brackets ensure stability.

4. Operating Instructions

Power On/Off and Mode Selection:

The bicycle light features a power button and a digital display to manage its functions.

  • Power Button: Press and hold the power button to turn the light on or off.
  • Mode Switching: Short press the power button to cycle through the four available light modes: Low Beam, High Beam On, High Beam Full Beam, and Flashing.
Diagram showing the four light modes: Floodlight, Spotlight, High Light, and Flash, with their respective durations
The four distinct lighting modes and their approximate runtimes.

Digital Display Function:

The integrated digital display provides essential information for your ride.

  • Display 1: Use Time: Shows the current operating time of the light in hours and minutes (e.g., 08:30).
  • Display 2: Power%: Indicates the remaining battery percentage (e.g., 083 for 83%).
  • Recharge(%): During charging, this display shows the charging progress from 0-100%.
Digital display showing 'Use Time' and 'Power%' functions
The digital display provides real-time information on use time and battery level.

Charging the Device:

The LIG010 features USB-C charging and can also function as a power bank.

  • Connect the light to a USB-C power source using a compatible cable.
  • The digital display will show the charging progress.
  • To use as a power bank, connect your external device (e.g., smartphone) to the light's USB-C port.
Image demonstrating Type-C reverse charging, showing the light charging a smartphone
The Type-C port allows for both charging the light and using it as a power bank.

Anti-Glare Feature:

The headlight is designed with a cut-off line to prevent dazzling oncoming cyclists and pedestrians, ensuring safe illumination without causing discomfort to others.

Illustration of the 180-degree wide illumination and anti-glare floodlight angle
The wide illumination and anti-glare design enhance visibility for the rider while being considerate of others.

5. Maintenance

  • Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Water Resistance: The light is IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. However, it is not 100% waterproof. Avoid prolonged use in heavy rain or submerging the light in water.
  • Storage: Store the light in a cool, dry place when not in use. If storing for an extended period, ensure the battery is partially charged (around 50-70%) and recharge it every few months to maintain battery health.
  • Battery Care: The integrated 10000 mAh battery (2 x 21700 cells) is designed for high endurance. Avoid fully discharging the battery frequently to prolong its lifespan.
  • Durability: The military-grade aluminum alloy construction provides wear-resistance, scratch-resistance, and impact-resistance. While durable, avoid unnecessary drops or impacts.
Image showing the IPX5 waterproof and dustproof features of the light during rain
The IPX5 rating protects against splashes and light rain.
Image highlighting the military-grade aluminum alloy material and its properties
The robust aluminum alloy construction ensures longevity.

6. Troubleshooting

  • Light not turning on: Ensure the battery is charged. Press and hold the power button for a few seconds to power on.
  • Light not charging: Check the USB-C cable and power adapter. Ensure the connection is secure. The digital display should show charging progress.
  • Short battery life: Ensure the light is fully charged before use. Operating in higher lumen modes will consume battery faster. Check the digital display for battery percentage.
  • Light flickering: This could indicate a low battery. Recharge the device. If the issue persists, contact customer support.

7. User Tips

  • Optimal Visibility: Utilize the 10000 lumen output for maximum visibility on dark roads or trails. The 180° wide illumination ensures a broad field of view.
  • Battery Management: Keep an eye on the digital display for 'Use Time' and 'Power%' to manage your rides and ensure you have enough battery life.
  • Power Bank Function: In emergencies, use the Type-C reverse charging feature to power your smartphone or other small devices.
  • Mode Selection: Choose the appropriate light mode for your riding conditions. Use lower beam settings in well-lit areas to conserve battery, and higher beams for maximum illumination.

8. Frequently Asked Questions (FAQ)

Q: How do I set the clock or time on the device?
A: The digital display on the NEWBOLER LIG010 shows 'Use Time' (the duration the light has been active) and 'Power%' (battery percentage), not a real-time clock. There is no function to set a clock on this device.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the NEWBOLER Official Store directly through your purchase platform. Keep your purchase receipt or order number handy for faster service.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.