JIKONG JK-PB2A16S20P

Contents

JIKONG Inverter BMS User Manual

Models: JK-PB1A16S10P, JK-PB1A16S15P, JK-PB2A16S15P, JK-PB2A16S20P

Introduction

This manual provides essential information for the safe and efficient operation of your JIKONG Inverter Battery Management System (BMS). The JIKONG BMS is an intelligent active balanced power management system designed for various battery chemistries including Li-ion, LiFePO4, and LTO, supporting 8S to 16S configurations for 24V, 48V, and 60V systems. It features advanced protection functions, active balancing, and multiple communication interfaces.

JIKONG Inverter BMS with 4.3-inch LCD display and interface board
JIKONG Inverter BMS with 4.3-inch LCD display and interface board.

Setup and Installation

Packing List

Before installation, verify that all components are present in the package:

Packing list for JIKONG BMS components
Visual representation of the packing list components.
  1. BMS x 1
  2. Interface board x 1
  3. Adapter cable B x 1 (long 30cm)
  4. Adapter cable A x 1 (long 30cm)
  5. R545 Network cable x 1 (long 40cm)
  6. Sampling line A x 2 (long 90cm)
  7. Sampling line B x 1 (long 90cm)
  8. Sampling line C x 1 (long 90cm)
  9. Switch x 1 (long 50cm)
  10. Adapter cable C x 1 (long 30cm)
  11. Heating Adapter cable x 1 (long 15cm)
  12. Adapter x 1

Wiring Instructions

Proper wiring is critical for the safe and correct operation of the BMS. Follow these steps carefully:

  1. Connect all the cables to their respective ports on the BMS and interface board.
  2. Insert the cable into the BMS.
  3. Connect the B-line and the P-line to the battery.
  4. Important: If there are two B8 cables, only the first B8 line needs to be connected. The second B8 cable does not need to be connected.
Wiring diagram for 16-string and 8-string battery cells with JIKONG BMS
Detailed wiring diagrams for 16-string and 8-string battery cell configurations.

Initial Configuration

The BMS can be configured and monitored via a mobile application or a host computer. Ensure your device is compatible (Android, iOS, HarmonyOS for mobile app).

Mobile app interface showing CAN protocol selection for inverter communication
Mobile APP interface for protocol selection and setup.
Host computer software interface for setting inverter communication protocols
Host computer software for advanced protocol settings.

Operation

Display and Monitoring

The optional 4.3-inch LCD display provides real-time information about your battery system, including voltage, current, temperature, and alarm status. This allows for quick visual checks of the system's health.

4.3-inch LCD display showing battery voltage, current, temperature, and balance status
The 4.3-inch LCD display provides key operational data.

Mobile Application Control

The JIKONG BMS mobile application (available for Android, iOS, and HarmonyOS) allows for comprehensive monitoring and adjustment of various parameters. You can view detailed battery information, set protection values, and receive alarms directly on your smartphone.

Multi-screen display options including mobile app, PC software, and dedicated home storage display
The mobile app offers detailed data connection and control.

Active Balancing Function

The BMS features active balancing, which achieves lossless balancing through energy transfer. This process moves energy from cells with higher energy to cells with lower energy, ensuring voltage balance with minimal energy loss. Active balancing operates continuously when a voltage difference above a set threshold is detected, working until the voltage difference is within the specified range. This process does not generate significant heat and supports balancing currents from 1A to 2A.

Illustration of active balancing process within a battery pack
Active Balancing (Lossless Balancing) mechanism.

Maintenance

To ensure the longevity and optimal performance of your JIKONG BMS, consider the following maintenance guidelines:

  • Regular Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning.
  • Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. The aluminum alloy heat sink is designed to manage temperature rise, but proper ventilation is still important.
  • Software Updates: Check for available firmware updates for the BMS and the mobile application to benefit from performance improvements and new features.
Close-up of the BMS showing cooling aluminum alloy heat sink
Aluminum alloy heat sink for efficient temperature management.

Troubleshooting

If you encounter issues with your JIKONG BMS, consider the following common troubleshooting steps:

  • No Power/Display: Verify all power connections to the BMS and the display unit. Check the battery voltage.
  • Communication Issues: Ensure Bluetooth is enabled on your mobile device and the app is correctly paired. For RS232/RS485/CAN connections, check cable integrity and protocol settings.
  • Alarm Indication: Refer to the BMS display or mobile app for specific alarm codes or messages. The BMS includes protection for overcharge, over-discharge, overcurrent, short circuit, and temperature. An alarm indicates one of these conditions has been met.
  • Balancing Problems: If cells are not balancing, ensure the active balancing function is enabled and check the voltage difference between cells.
  • Incorrect Readings: Confirm that all sampling lines are correctly connected to the battery cells.

For complex issues, consult the detailed technical documentation or contact JIKONG customer support.

Specifications

The JIKONG Inverter BMS offers various models with specific technical parameters. Below is a summary of key specifications:

Table of JIKONG Product Specifications for different BMS models
Detailed product specifications for JIKONG BMS models.
JIKONG Product Specifications
Technical IndexJK-PB1A16S10PJK-PB1A16S15PJK-PB2A16S15PJK-PB2A16S20P
Number of Battery Strings (Li-ion)7S-16S7S-16S7S-16S7S-16S
Number of Battery Strings (LiFePO4)8S-16S8S-16S8S-16S8S-16S
Number of Battery Strings (LTO)14S-16S14S-16S14S-16S14S-16S
Balance MethodActive Balance (Full State On)
Balance Current1A1A2A2A
Conductive Resistance in Main Circuit0.8mΩ0.4mΩ0.4mΩ0.3mΩ
Continuous Discharge Current100A150A150A200A
Maximum Discharge Current (MAX 2min)200A300A300A350A
Over Charge Protection Current (ADJ)10-100A10-150A10-150A10-200A
Other Interfaces (Default)RS485/232/CAN
Wiring OutputCommon Port
Single Cell Voltage Range1-5V
Voltage Acquisition Accuracy±5mV
Over Charge Protection Voltage1.2-4.35V Adjustable
Over Charge Release Voltage1.2-4.35V Adjustable
Over Current Detect Delay2-120S Adjustable
Over Discharge Protection Voltage1.2-4.35V Adjustable
Over Discharge Release Voltage1.2-4.35V Adjustable
Quantity of Temperature Detection4
Temp ProtectionYes
Short Circuit ProtectionYes
Coulomb CounterYes
Bluetooth FunctionSupport for Android/iOS/Harmony
Parallel charging current limiting10A
Address dial switch4
DRY Contact2

Warranty and Support

The JIKONG Inverter BMS is certified with CE, FCC, and RoHS, ensuring compliance with international safety and environmental standards.

For technical support, warranty claims, or any inquiries regarding your JIKONG BMS, please contact the manufacturer or your authorized dealer. Ensure you have your product model and purchase details ready when seeking support.

User Tips

  • Verify Version: The BMS is available in different versions (e.g., V15). Ensure you are using the correct manual and software for your specific version.
  • App Monitoring: Regularly use the mobile application to monitor battery health and performance. This can help in early detection of potential issues.
  • Protocol Compatibility: When integrating with an inverter, ensure the correct communication protocol is selected and configured via the mobile app or host computer software. Supported protocols include Deye, Pylontech, Growatt, Victron Energy, SOFAR, INVT, Goodwe, SMA, SRNE, and others.
  • Parallel Connection: The BMS supports parallel connection of multiple battery packs with an integrated 10A current limiting module for safe expansion.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.