1. Introduction
This manual provides detailed instructions for the proper use and maintenance of your new original remote control for the Philips TAB5105 2.0 Soundbar speaker. Please read this manual carefully before using the remote control to ensure optimal performance and longevity.
2. Setup
2.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or press the latch and pull to open.
- Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery cover by sliding it back into place until it clicks securely.
2.2 Initial Pairing (if required)
While many IR remotes work directly, if your soundbar requires pairing, follow these general steps:
- Ensure your Philips TAB5105 soundbar is powered on.
- Press and hold the 'Pair' button on the remote control for a few seconds.
- Observe the soundbar for any indication of pairing mode (e.g., flashing LED).
- Release the 'Pair' button once the soundbar indicates successful pairing or responds to commands.
Refer to your Philips TAB5105 soundbar's main user manual for specific pairing instructions if the above steps are not effective.
3. Operating Instructions
Point the remote control directly at the Philips TAB5105 soundbar's IR receiver. Ensure there are no obstructions between the remote and the soundbar.
3.1 Button Functions
| Button | Function |
|---|---|
| Power (⏻) | Turns the soundbar On or Off. |
| Mute (🔇) | Mutes or unmutes the sound. |
| Volume Up (+) | Increases the volume level. |
| Volume Down (-) | Decreases the volume level. |
| Play/Pause (⏸) | Plays or pauses audio playback. |
| Skip Back (⏮) | Skips to the previous track/chapter. |
| Skip Forward (⏭) | Skips to the next track/chapter. |
| Pair | Initiates pairing mode for Bluetooth or other wireless connections. |
| BT (Bluetooth) | Selects Bluetooth as the audio input source. |
| HDMI (ARC) | Selects HDMI ARC (Audio Return Channel) as the audio input source. |
| EQ | Cycles through available Equalizer (EQ) sound modes. |
| AUX | Selects Auxiliary input as the audio source. |
| Optical | Selects Optical input as the audio source. |
4. Maintenance
4.1 Battery Replacement
Replace batteries when the remote control's range decreases or it stops responding. Always replace both batteries at the same time with new ones of the same type (AAA). Do not mix old and new batteries or different types of batteries.
4.2 Cleaning
Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid moisture and direct sunlight.
4.3 Storage
If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
5. Troubleshooting
- Remote not responding: Check if the batteries are correctly inserted and have sufficient charge. Ensure there is a clear line of sight between the remote and the soundbar.
- Limited range: Replace the batteries with new ones.
- Pairing issues: Refer to your soundbar's user manual for specific pairing instructions. Ensure no other devices are interfering with the signal.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | TAB5105 |
| Wireless Communication | IR (Infrared) |
| Frequency | 433 MHz |
| Channel | 1 |
| Support APP | No |
| Use | Specifically designed for Philips 2.0 Soundbar Speaker (TAB5105) |
| Origin | Mainland China |
| Certification | CE |
| Dimensions (Approx.) | Length: 20 cm, Width: 10 cm, Height: 2 cm |
| Weight (Approx.) | 0.1 kg (excluding batteries) |
7. User Tips
- Compatibility Check: This remote is specifically designed for the Philips TAB5105 soundbar. While it may resemble other remotes, its functionality is guaranteed only for the specified model. If you are unsure about compatibility with a different soundbar model (e.g., Onn HSB334SW-A90), please consult your soundbar's manufacturer or product documentation.
- Line of Sight: For optimal performance, always ensure a clear line of sight between the remote control and the soundbar's infrared receiver. Obstructions can block the signal.
- Battery Quality: Use high-quality alkaline batteries for longer life and consistent performance.
8. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your Philips TAB5105 soundbar speaker or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.
