1. Product Overview
The JIKONG JKBMS PB2A16S20P is an intelligent active balanced power management system designed for large capacity series lithium battery packs. It features voltage acquisition, high current active balancing, overcharge/over-discharge/overcurrent/over-temperature protection, coulomb meter, Bluetooth communication, and host computer monitoring. This BMS is suitable for various battery types including Lithium Iron Phosphate (LiFePo4), Ternary Lithium (Li-Ion), and Lithium Titanate (LTO) batteries, supporting 8S-16S configurations.
The system utilizes energy transfer active balancing technology with a continuous balancing current of 1A-2A, ensuring battery consistency, improving range, and extending battery life. It comes with a mobile APP for Android and iOS, allowing real-time monitoring and parameter adjustment. The compact design and comprehensive functions make it ideal for high-power energy storage, communication base stations, and solar power applications.


2. Specifications
The following table details the technical specifications and parameters for the JIKONG JKBMS PB2A16S20P model. For customized services, please consult customer service.

| Attribute | Value |
|---|---|
| Brand Name | JIKONG |
| Type | LI-ION Battery BMS |
| Handware or Smart | SMART BMS |
| Balance Function | Active Balanced BMS |
| Charging Current | 200A |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Charge and Discharge Port | Common Port BMS |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| 4.3 inches LCD | LCD display can be added |
| Suit for Battery | Li-ion / LiFePo4 / LTO |
| Battery Strings | 8S ~16S |
| Temperature protection | Yes |
| Heating Function | Yes |
| Adapting system | Android or iOS Harmony |
| Operation, alarm, and power indication | Support |
| Support Parallel Connection | Yes |
| Built-in Interface | BT/RS232/RS485/CAN |
| Certification | CE, FCC, RoHS |
| Product Dimensions (L*W*H) | 300mm * 100mm * 24mm |
| Product Weight | 1000g |
3. Setup and Installation
3.1. Packing List
Before installation, please verify that all components are present according to the packing list:

- BMS x 1
- Interface board x 1
- Adapter cable B x 1 (long 30cm)
- Adapter cable A x 1 (long 30cm)
- R545 Network cable x 1 (long 40cm)
- Sampling line A x 2 (long 90cm)
- Sampling line B x 1 (long 90cm)
- Sampling line C x 1 (long 90cm)
- Switch x 1 (long 50cm)
- Adapter cable C x 1 (long 30cm)
- Heating Adapter cable x 1 (long 15cm)
- Adapter x 1
3.2. Wiring Instructions
The JIKONG BMS is suitable for 7-16 series lithium battery packs. The wiring method varies depending on the number of cells in the battery pack. Always ensure correct connections to prevent damage.
- Connect all the cables.
- Insert the cable into the BMS.
- Connect the B-line and the P-line to the battery.
- Important: If there are two B8 cables, only the first B8 line needs to be connected. The second B8 cable does not need to be connected.

The diagram above illustrates the wiring for both 16-string and 8-string cell configurations. Pay close attention to the connections for the total negative electrode, total positive electrode, charger, and load/motor.
3.3. Device Activation
Before powering on the protection board, ensure the following:
- Verify that the balance cables are properly connected.
- Confirm that the P- and B- lines are correctly connected.
- Ensure the protection board is securely fixed to the battery pack.
Once these checks are complete, you can power on the protection board. The BMS does not have a power-on control switch; it is designed for charging activation. Connect a charger (voltage 2V higher than battery voltage) to activate the BMS. Alternatively, if a display screen and button are used, insert the cable into the display interface and press the button to activate.
3.4. APP Installation
The mobile APP for the JIKONG BMS supports Android (version 7 minimum) and iOS operating systems. To install the APP, scan the QR code below:

4. Operation
4.1. Functional Characteristics
The JIKONG BMS offers a wide range of features for comprehensive battery management:
- LED Indicators: Bluetooth status, RUN, ALM, and battery capacity (L1-L5) indicators.
- APP Control: Remote operation via Bluetooth for Android/iOS/HarmonyOS.
- Voltage & Current Acquisition: High precision (±3mV for voltage).
- Display Interface: Support for external display screens (e.g., 4.3-inch LCD) for real-time battery information.
- Heating Function: Prevents battery performance degradation in low temperatures.
- Dry Contact Function: Two dry contacts for controlling external alarms or cooling fans.
- Protection Functions: Overcharge, over-discharge, overcurrent, over-temperature, low-temperature, and short-circuit protection.
- Emergency Switch: Provides 30 minutes of charge/discharge operation during critical events.
- Intelligent Sleep: Reduces BMS energy consumption during standby.
- Communication: Built-in BT/RS232/RS485/CAN interfaces, compatible with mainstream inverter protocols.
- Parallel Connection: Supports parallel connection of multiple battery packs with address settings via DIP switch.
- Charge Current Limiting: Limits charging current to protect the battery.

4.2. Active Equalization
The BMS uses active equalization to transfer energy from high-voltage cells to low-voltage cells, maintaining battery consistency. Users can set the balance trigger voltage difference (mV) via the APP. The default balance current is 1A/2A. It is recommended that the balance current does not exceed 0.2C of the battery capacity. The balancing function can be turned off in the APP if not needed.

4.3. Display and APP Monitoring
The BMS supports an external 4.3-inch LCD display for convenient viewing of battery information. The mobile APP provides a comprehensive interface to monitor voltage, current, temperature, SOC, alarms, and cycle counts. The host computer software also allows detailed monitoring and parameter configuration.


4.4. Parallel Function
The parallel function allows multiple JIKONG BMS units to be monitored simultaneously by a host computer via RS485. Up to 16 BMS units can be connected. Each BMS needs a unique address (0-15) set via a DIP switch. BMS with address 0 acts as the host, and others as slaves. The host computer connects to the host BMS via a USB to RS485 serial cable, and slave BMS units are daisy-chained using RJ45 Ethernet cables.

Refer to the DIP switch settings on OCR page 25 for configuring addresses for parallel operation.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your JIKONG BMS. While the system is designed for robust operation, periodic checks and proper handling are recommended.
- Firmware Updates: Check the JIKONG official website or APP for any available firmware updates to ensure your BMS has the latest features and bug fixes.
- Connection Integrity: Periodically inspect all wiring connections (balance cables, power lines, communication cables) for any signs of wear, corrosion, or looseness. Ensure all connectors are securely seated.
- Environmental Conditions: Ensure the BMS operates within its specified temperature range. Avoid exposure to excessive moisture, dust, or extreme temperatures.
- Cleaning: Keep the BMS unit clean and free from dust buildup, especially around cooling components. Use a soft, dry cloth for cleaning.
- Battery Health Monitoring: Regularly monitor battery parameters via the APP or display to identify any abnormal cell voltages, temperatures, or currents that might indicate an issue with the battery pack itself.
5.1. Aluminum Alloy Heat Sink
The BMS features an aluminum alloy heat sink designed to reduce the temperature rise of the protection board, enhancing its reliability. Ensure that the heat sink is not obstructed and has adequate airflow for efficient cooling.

6. Troubleshooting
This section provides guidance on common issues and their potential solutions. For complex problems, contact JIKONG technical support.
6.1. Protection Triggers and Alarms
The BMS is equipped with various protection mechanisms. When a protection is triggered, the BMS will take action (e.g., stop charging/discharging) and may activate an alarm. The LED indicators can help identify the status:
- Overcharge/Over-discharge Protection: If cell voltage exceeds/falls below set thresholds. Check cell balance and battery health.
- Overcurrent Protection: If charging/discharging current exceeds limits. Reduce load or charging current.
- Overtemperature/Low-temperature Protection: If BMS or battery temperature is outside safe operating range. Ensure proper ventilation or use the heating function if applicable.
- Short Circuit Protection: Triggered by sudden high current. Check wiring for shorts. The BMS has a short-circuit protection delay and recovery time.
- Alarm LED (ALM): Indicates an active alarm condition. Refer to the APP or display for specific alarm details.
- Emergency Switch: If the BMS enters a problematic state (over-temperature, over-discharge, over-charge, drop string), activating the emergency switch via the APP will allow 30 minutes of charge/discharge operation.
6.2. Communication Issues
- Bluetooth Connection: If the APP cannot connect, ensure Bluetooth is enabled on your mobile device and the BMS. The Bluetooth status indicator LED should be steady on when connected and blinking when disconnected.
- RS485/CAN Communication: Verify correct wiring and protocol settings in the APP for your inverter or host computer. For parallel systems, ensure each BMS has a unique address set via the DIP switch.
The LED description table on OCR page 26 provides detailed information on LED states for various normal, alarm, and protection conditions. The power LED description on OCR page 27 indicates battery capacity.
7. User Tips
- Inverter Compatibility: The JIKONG BMS is compatible with mainstream inverter communication protocols. If you are using an Easun 11KV inverter, the BMS should be compatible. Always verify the specific protocol settings in the mobile APP or host computer software.
- Parameter Adjustment: When adjusting protection values (overcharge, over-discharge, overcurrent, temperature, balance), always refer to the internal parameters of the protection board first before making changes.
- Low Temperature Operation: If operating in extremely cold environments, utilize the heating function to protect the battery cells and maintain optimal performance.
- Parallel System Setup: When setting up multiple BMS units in parallel, carefully configure the unique address for each unit using the DIP switches (0 for host, 1-15 for slaves) to ensure proper communication and monitoring.
8. Warranty and Support
JIKONG products are manufactured by Chengdu Jikong Technology Co., Ltd. For technical support, warranty claims, or service inquiries, please contact your vendor or refer to the official JIKONG support channels. Ensure you retain your purchase records for warranty purposes.

A user manual in PDF format is available for download. This document provides detailed instructions and specifications. You can access it via the following link: JIKONG Energy Storage Series BMS Product Specification (PDF).