1. Introduction and Overview
The JIKONG JK-PB2A16S20P is an intelligent active balanced Battery Management System (BMS) designed for 8S-16S Li-ion, LiFePo4, and LTO battery systems. This Smart BMS features a 200A charge/discharge current and 2A active balancing, ensuring optimal battery performance and longevity. It is tailored for home energy storage systems, and also suitable for applications such as communication base stations, building energy storage, and industrial equipment backup power.
Key features include:
- Active balance for good durability and stable performance.
- Real-time active energy transfer equalization using a supercapacitor.
- Single cell voltage range of 1V~5V with an equalization accuracy of ±5mV.
- Continuous balanced current of 2A, improving battery consistency and extending lifespan.
- Mobile phone Bluetooth communication with a dedicated APP supporting Android, iOS, and HarmonyOS.
- Support for various battery types: Lithium Iron Phosphate, Ternary Lithium, and Lithium Titanate.
- Multiple communication interfaces: BT/RS232/RS485/CAN.
- Integrated 10A current limiting module for safe parallel battery expansion.
- Full aluminum alloy shell for excellent heat dissipation.


2. Specifications
The JIKONG JK-PB2A16S20P Smart BMS offers robust performance and protection features. Detailed specifications are provided below:

| Technical Index | Value |
|---|---|
| Number of Battery Strings (Li-ion) | 7S-16S |
| Number of Battery Strings (LiFePo4) | 8S-16S |
| Number of Battery Strings (LTO) | 14S-16S |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 2A |
| Conductive Resistance in Main Circuit | 0.3mΩ |
| Continuous Discharge Current | 200A |
| Maximum Discharge Current (MAX 2min) | 350A |
| Over Charge Protection Current (ADJ) | 10-200A |
| Other Interfaces | RS485/232/CAN |
| Wiring Output | Common Port |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Charge Release Voltage | 1.2-4.35V Adjustable |
| Over Current Detect Delay | 2-120S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable |
| Quantity of Temperature Detection | 4 |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/iOS/Harmony |
| Parallel charging current limiting | 10A |
| Address dial switch | 4 |
| DRY Contact | 2 |
| Certification | CE, FCC, RoHS |
3. Package Contents
Please check the package carefully upon receipt to ensure all components are present:

- BMS x 1
- Interface board x 1
- Adapter cable B x 1 (long 30cm)
- Adapter cable A x 1 (long 30cm)
- R545 Network cable x 1 (long 40cm)
- Sampling line A x 2 (long 90cm)
- Sampling line B x 1 (long 90cm)
- Sampling line C x 1 (long 90cm)
- Switch x 1 (long 50cm)
- Adapter cable C x 1 (long 30cm)
- Heating Adapter cable x 1 (long 15cm)
- Adapter x 1
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your JIKONG Smart BMS. Please follow these steps carefully:
- Connect all the cables: Ensure all necessary cables (sampling lines, communication cables, etc.) are prepared and ready for connection.
- Insert the cable into the BMS: Carefully connect the smaller cables, such as the sampling lines, to their designated ports on the BMS unit.
- Connect the B-line and the P-line to the battery: Connect the main negative (B-) and positive (P+) lines from the BMS to your battery pack.
- Special note for B8 cable: If your setup includes two B8 cables, only the first B8 line needs to be connected. The second B8 cable should not be connected.

Important Safety Information:
- Always ensure the battery pack is disconnected from any power source before beginning installation.
- Double-check all connections for correct polarity and secure fit to prevent damage to the BMS or battery.
- Refer to the wiring diagrams provided for your specific battery string configuration (e.g., 8-string or 16-string).
5. Operating Instructions
The JIKONG Smart BMS offers intelligent interaction and easy operation through its mobile application and PC software.
5.1 Mobile APP and PC Software
The BMS supports Bluetooth communication with a dedicated mobile APP (Android, iOS, HarmonyOS) and can also be managed via PC software. These interfaces allow for real-time monitoring of battery status and adjustment of protection parameters.



5.2 Adjusting Parameters
You can freely adjust multiple protection values such as overcharge, overdischarge, overcurrent, temperature, and balance settings through the mobile APP or PC software. Always read the internal parameters of the protection board first before making any changes.
5.3 Communication Interfaces
The BMS is equipped with various built-in interfaces for communication and control:
- Bluetooth (BT)
- RS232
- RS485
- CAN

6. Maintenance
To ensure the long-term performance and reliability of your JIKONG Smart BMS and battery system, consider the following maintenance aspects:
6.1 Active Balancing
The BMS features active balancing (lossless balancing) which continuously works to maintain cell voltage consistency. This process transfers energy from higher-energy cells to lower-energy cells, preventing premature aging and improving the overall lifespan and cruising range of your battery pack. Active balancing operates whenever there is a voltage difference above the set threshold, whether the battery is charging, discharging, or idle. It works continuously until the voltage difference is within the set range and does not generate heat, allowing for larger balancing currents (typically 1A to 2A).

6.2 Thermal Management
The BMS is designed with an aluminum alloy heat sink to effectively reduce the temperature rise of the protection board, enhancing its reliability. Ensure adequate airflow around the BMS unit, especially in enclosed installations, to facilitate proper cooling.
7. Troubleshooting
If you encounter issues with your JIKONG Smart BMS, consider the following common troubleshooting steps:
- No Power/No Indication: Check all power connections, including the main B- and P+ lines, and ensure the battery pack is charged. Verify that the switch is in the ON position if applicable.
- Balancing Issues: If cells appear unbalanced, ensure the sampling lines are correctly and securely connected to each cell. The active balancing feature should work automatically. Monitor cell voltages via the mobile APP or PC software.
- Protection Triggered (Overcharge, Overdischarge, Overcurrent, Short Circuit, Temperature): The BMS is designed to protect your battery. If a protection mechanism is triggered, identify the cause (e.g., excessive load, low temperature, high charge voltage) and rectify it. The BMS may automatically reset once conditions return to normal, or require a manual reset via the APP/software.
- Communication Problems: Ensure Bluetooth is enabled on your mobile device and the APP is correctly installed. For RS232/RS485/CAN, check cable connections and software settings.
- Unusual Behavior: If the BMS exhibits unexpected behavior, review all wiring for errors and consult the detailed parameters in the APP/PC software for any abnormal readings or alarms.
For complex issues, it is recommended to contact JIKONG technical support.
8. User Tips
- Verify Package Contents: Before starting installation, carefully check the packing list against the received items to ensure all necessary components, including any busbars or connectors, are present.
- Software Updates: Regularly check for updates to the mobile APP and PC software to ensure you have the latest features and bug fixes.
- Parameter Customization: Take advantage of the adjustable protection parameters through the APP/PC software to fine-tune the BMS to your specific battery chemistry and application needs. However, always proceed with caution and understand the implications of each setting.
- Parallel Connection: When using the parallel protection technology for battery expansion, ensure that the integrated 10A current limiting module is correctly utilized as per the wiring diagrams.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your vendor or the official JIKONG support channels. Ensure you have your product model number (JK-PB2A16S20P) and purchase details available when seeking assistance.


