Introduction
The UGREEN SmartTrack Link is a compact and efficient item tracker designed to help you locate your belongings using Apple's Find My network. This manual provides detailed instructions on how to set up, operate, and maintain your SmartTrack Link, ensuring you get the most out of its features.

Important Note: The UGREEN SmartTrack Link is compatible only with Apple devices (iOS, iPadOS, macOS) and does not support Android devices.
Setup and Pairing
1. Initial Power-On and Battery Activation
- The SmartTrack Link comes with an insulation film to prevent battery drain during shipping. Locate the insulation film.
- Remove the insulation film. The product will automatically power on with a beep sound and an indicator light.

2. Pairing with Apple Find My App
To pair your SmartTrack Link with your Apple device, ensure your device meets the system requirements (iOS 14.5+, iPadOS 14.5+, macOS 11+), Bluetooth is enabled, and you have a stable internet connection.
- Bring the SmartTrack Link close to your iPhone or iPad.
- Open the "Find My" app on your Apple device.
- Navigate to the "Items" tab.
- Tap the "+" icon and select "Add Other Item" or "Add New Item" then "Other Supported Item".
- The app will search for nearby items. Once "SmartTag" appears, tap "Connect".
- Follow the on-screen prompts to name your item and assign an emoji.
- Agree to the terms and conditions to link the item to your Apple ID.

Video: Demonstration of UGREEN SmartTrack Link pairing with Apple Find My.
Operating Instructions
1. Locating Your Item
- Find Nearby (Play Sound): If your item is within Bluetooth range (typically 10-20 meters, depending on the environment), open the Find My app, select your SmartTrack Link, and tap "Play Sound". The tracker will emit 12 beeps to help you locate it.
- Find Far Away (Map Location): If your item is out of Bluetooth range, the Find My app will display its most recent location on a map, leveraging Apple's global Find My network. You can get directions to this last known location.

2. Left Behind Alert
Receive notifications on your Apple device if you leave your tracked item behind. This feature helps prevent loss by alerting you when you move too far from your SmartTrack Link.

3. Anti-Tracking Function
The SmartTrack Link includes an anti-tracking feature. If an unknown SmartTrack Link (or AirTag) is traveling with you, your Apple device may notify you with an "AirTag Detected Near You" alert, helping to protect your privacy and security.

4. Sharing Your SmartTrack Link
You can easily share your SmartTrack Link with up to six people, allowing friends and family to track your items. This is useful for shared items like car keys or luggage.

5. Voice Assistant Integration
You can use Siri to locate your items. Simply say, "Hey Siri, find my [item name]" (e.g., "Hey Siri, find my keys") and your SmartTrack Link will play a sound if it's nearby.
Maintenance
Battery Replacement
The UGREEN SmartTrack Link is powered by a replaceable CR2032 coin cell battery, offering approximately 18 months of battery life. To replace the battery:
- Turn the back cover of the SmartTrack Link counterclockwise to open it.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) polarity facing up.
- Turn the back cover clockwise to close and secure it.


Troubleshooting
- Q: Nothing happens when I press the button for the first time.
- A: Ensure the insulation film has been removed from the battery compartment. The device will automatically power on with a beep and indicator light once the film is removed.
- Q: The tracker's location is not updating in a timely manner or has not updated for a long time.
- A: The SmartTrack Link relies on nearby Apple devices to broadcast its signal to the Find My network. Location updates are not real-time and depend on the density of Apple devices in the vicinity and Apple's system update frequency. In areas with fewer Apple devices, updates may be slower.
- Q: I cannot add the UGREEN SmartTrack Link to the Apple Find My App.
- A:
- Verify your iPhone/iPad meets the system requirements: iOS 14.5 or later, iPadOS 14.5 or later, or macOS 12.5 or later.
- Ensure Bluetooth is turned on and your device has a stable internet connection.
- Perform a factory reset: While powered on, quickly press the button 5 times (you should hear 3 consecutive beeps). Then, press and hold the button for 6 seconds until you hear 2 beeps. After the reset, try adding it to the Find My app again.
- Q: How do I rebind an already added tracker to another iPhone?
- A:
- If the original iPhone and tracker are nearby: Use the original iPhone's Find My App to select "Remove Item". The tracker can then be paired with the new iPhone.
- If the original iPhone and tracker are far apart: First, remove the tracker from the Find My App on the original iPhone. Then, perform a factory reset on the SmartTrack Link (as described above: 5 quick presses, then press and hold for 6 seconds). The tracker can then be paired with the new iPhone.
- Q: The UGREEN SmartTrack Link cannot play sound.
- A: The sound alert function works when the tracker is within close Bluetooth proximity to your iPhone (typically 10-20 meters). Sound cannot be played at long distances, but you can still view its updated location on the map.
- Q: Does it work with Android devices?
- A: No, the UGREEN SmartTrack Link is exclusively designed for Apple's Find My network and is not compatible with Android devices.
Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Code | CM520 |
| Model Name | UGREEN Smart Tag |
| Bluetooth® Version | 5.2 |
| Bluetooth Protocol | BLE |
| Battery Type | CR2032 |
| System Requirements | iOS 14.5 and above / iPadOS 14.5 and above / macOS 11 and above |
| Compatible Devices | iPhone, iPad, Mac |
| Applications | Apple's built-in 'Find My' App |
| Product Positioning Range | Global Positioning (GPS) |
| Operating Frequency | 2.400GHz–2.4835GHz |
| Frequency Response | 20Hz–20KHz |
| Material (Body shell/Middle frame) | PC + ABS |
| Material (Bottom Case) | Stainless Steel |
| Warranty | 1 year |
| Package | UGREEN Retail Box |
| Dimensions (Diameter) | 3.19 cm |
| Dimensions (Thickness) | 0.85 cm |
| Waterproof | No |

User Tips
- Apple Ecosystem Only: Remember that the SmartTrack Link works exclusively with Apple's Find My network. It is not compatible with Android devices.
- Location Accuracy: While effective for general tracking, the SmartTrack Link does not feature Ultra Wideband (UWB) technology found in some other trackers. This means it won't provide precise distance or directional guidance (like an arrow) when you're very close to the item. It relies on Bluetooth proximity for sound alerts and the Find My network for map location.
- Battery Life: The CR2032 battery typically lasts around 18 months. Keep a spare battery handy for quick replacement.
- Keychain Protector: Utilize the included keychain protector to easily attach your SmartTrack Link to keys, bags, or other items.
- Anti-Theft Considerations: While the anti-tracking feature is designed to alert you if an unknown tracker is with you, it's important to understand its limitations in anti-theft scenarios. It primarily relies on proximity alerts and the Find My network's crowd-sourced location data.
Warranty and Support
The UGREEN SmartTrack Link comes with a 1-year warranty from the date of purchase. For warranty claims, technical support, or any inquiries, please contact UGREEN customer service through their official website or the retailer where you purchased the product.
Please retain your proof of purchase for warranty validation.