Introduction
Thank you for choosing the Redmi Buds 6 Vitality Edition earphones. These semi-in-ear wireless earbuds are designed for a comfortable listening experience, featuring a 14.2mm large dynamic coil for rich audio, long battery life, and advanced connectivity. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new earphones.
Package Contents
Please check the package for the following items:
- Redmi Buds 6 Vitality Edition Earbuds (Left and Right)
- Charging Case
- USB Charging Cable (Type-C)
- User Manual
Setup
1. Charging the Earphones and Case
Before first use, fully charge the earphones and the charging case.
- Place the earbuds into the charging case.
- Connect the USB charging cable to the charging port on the case and a power adapter (not included).
- The indicator light on the case will show charging status. Once fully charged, the indicator will change (refer to specific light behavior in the quick start guide if available).
Note: The charging case input is 5V 500mA, and the earphone input is 5V 50mA.
2. Pairing with a Device
The Redmi Buds 6 Vitality Edition uses Bluetooth 5.4 for stable connectivity.
- Open the charging case lid. The earphones will automatically enter pairing mode (if not already paired).
- On your device (smartphone, tablet, etc.), enable Bluetooth.
- Search for available Bluetooth devices and select "Redmi Buds 6 Vitality Edition" from the list.
- Once connected, you will hear a confirmation tone.
The earphones support quick connection when the lid is opened after initial pairing.
3. Wearing the Earphones
Gently insert the earbuds into your ears. Adjust them for a comfortable and secure fit. The semi-in-ear design is crafted for exquisite and lightweight wear.
Operating Instructions
Basic Controls
The Redmi Buds 6 Vitality Edition features intuitive touch controls. Specific gestures may vary, but common functions include:
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud.
- Activate Voice Assistant: A dedicated touch gesture (e.g., triple tap or press and hold) can wake up your device's voice assistant.
Sound Features
Experience high-quality audio with:
- 14.2mm Large Dynamic Coil Unit: Delivers thick bass and a shocking listening experience.
- Built-in Five Tuning Modes: Allows you to customize your audio experience to meet the needs of multi-scene listening.
Call Features
The earphones are equipped with:
- Dual Wheat Call Anti-Wind Noise: Provides clear calls with an anti-wind noise effect of up to 4m/s.
Battery Life
Enjoy extended listening with:
- 30H Long Battery Life: Total battery life with the charging case.
- Quick Charge: Charge for 10 minutes to get 1 hour of listening time.
Maintenance
Cleaning
- Use a soft, dry, lint-free cloth to clean the earbuds and charging case.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Avoid getting moisture in any openings.
Storage
- When not in use, always store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place, away from extreme temperatures and direct sunlight.
Troubleshooting
If you encounter issues with your Redmi Buds 6 Vitality Edition, try the following steps:
- No Sound: Ensure the earbuds are charged, properly paired, and the volume on your device is turned up.
- Pairing Issues: Turn off Bluetooth on your device, place the earbuds back in the case, close the lid, then reopen to re-enter pairing mode. Try pairing again.
- One Earbud Not Working: Place both earbuds back in the case, close the lid, wait a few seconds, then take them out again. This often re-syncs them.
- Charging Problems: Check the charging cable and adapter. Ensure the charging contacts on the earbuds and inside the case are clean and free of debris.
- Voice Assistant Not Responding: Ensure your device's voice assistant is enabled and the earphones are properly connected.
For persistent issues, consider resetting the earphones (refer to the quick start guide for specific reset instructions if available) or contacting customer support.
Specifications
| Feature | Specification |
|---|---|
| Model Number | M2344E1 |
| Communication Method | Bluetooth-Compatible (Bluetooth 5.4) |
| Earphone Input | 5V 50mA |
| Charging Case Input | 5V 500mA |
| Charging Case Output | 5V 200mA |
| Communication Distance | 10 meters (barrier-free open environment) |
| Dynamic Coil Size | 14.2mm |
| Total Battery Life | Up to 30 hours (with charging case) |
| Call Noise Reduction | 2 Mic AI Call Anti-Wind Noise (up to 4m/s) |
| State of Assembly | Ready-to-Go |
| App Support | Xiaomi Headset APP |
| Origin | Mainland China |
User Tips
- Optimal Fit: Experiment with different earbud positions to find the most comfortable and secure fit for the best sound quality and noise isolation.
- Regular Charging: For consistent performance, make it a habit to place the earbuds back in their charging case when not in use.
- App Integration: Download the Xiaomi Headset APP for potential additional features, customization options, and firmware updates.
- Clean Contacts: Periodically wipe the charging contacts on both the earbuds and inside the case with a dry cotton swab to ensure reliable charging.
Warranty and Support
For warranty information, service, or technical support, please refer to the official Redmi/Xiaomi website or contact their customer service directly. The service hotline is 400-100-5678 and the official website is www.mi.com.
