Ac Pro HCT-322

Contents

Ac Pro HCT-322 Automatic Water Timer User Manual

Intelligent Digital Irrigation Machine for Garden and Outdoor Use

Introduction

The Ac Pro HCT-322 Automatic Water Timer is an intelligent digital irrigation machine designed to simplify garden watering, saving both water and time. This device features a large display, easy programming, and robust construction for reliable outdoor use. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance of your water timer.

Ac Pro HCT-322 Automatic Water Timer front view

Figure 1: Ac Pro HCT-322 Automatic Water Timer

Specifications

FeatureSpecification
Model NumberHCT-322
MaterialPlastic (ABS Casing)
Timer TypeAc Pro
OriginMainland China
Product TypeGarden Water Timer
Power Supply2 x 1.5V 'AA' Alkaline Batteries (Not Included)
Water ResistanceIPX5
Pipe MaterialSuper thick nylon pipe
Display Size2.76-inch LCD
Dimensions (Main Body)9.8 cm (3.85 in) Width x 8.3 cm (3.26 in) Height x 4.8 cm (1.88 in) Depth
Overall Height (with connector)12.6 cm (4.96 in)
Dimensions of the HCT-322 Water Timer

Figure 2: Product Dimensions and Power Supply Information

Package Contents

Please check the package to ensure all components are present based on your connector type:

For BS Connector (Most Countries)

  • Water Timer × 1
  • User Manual × 1
  • O-ring × 1
  • 1/2" Adapter × 1
  • Quick Connector × 1
  • Packing Box × 1

For UN Connector (USA, Canada, Mexico)

  • Water Timer × 1
  • User Manual × 1
  • O-ring × 1
  • Packing Box × 1
Package contents for BS and UN connector types

Figure 3: Package Listing for Different Connector Types

Setup

  1. Install Batteries: Open the battery compartment and insert two (2) 1.5V 'AA' alkaline batteries. Ensure correct polarity. Close the compartment securely.
  2. Install Filter: Ensure the removable filter is properly seated in the inlet connector to prevent debris from entering the timer. This helps ensure clean water flow and protects the device.
  3. Connect to Faucet:
    • For USA-type (3/4" Hose Faucet): Screw the water timer directly onto your 3/4" hose faucet. Ensure the 5mm O-ring is in place for a watertight seal.
    • For EU-type (1/2" Hose Faucet): Use the provided 1/2" adapter. First, screw the adapter onto your 1/2" hose faucet, ensuring the 3mm O-ring is in place. Then, screw the water timer onto the adapter.

    The timer features a 360° rotatable connector, allowing for quick and easy installation even in narrow spaces. Screw to the hose faucet as tight as you can by hand.

  4. Connect Hose/Irrigation System: Attach your garden hose or irrigation system to the 3/4" outlet fitting at the bottom of the water timer. If your system requires a quick connector, use the one provided (for BS connector type).
Wiring diagram for BS and UN connector types

Figure 4: Connector Types and Installation Diagram

Diagram showing the water timer connected to an irrigation system

Figure 5: Example of Water Timer Connected to an Irrigation System

Operating Instructions

The HCT-322 water timer features a large 2.76-inch LCD screen for clear display of all information and easy programming based on watering logic.

HCT-322 Water Timer display with labeled components

Figure 6: Display Components and Their Functions

  • A: Current Time (NOW)
  • B: Irrigation Duration (HOW LONG)
  • C: Outlet Fitting 3/4"
  • D: Irrigation Start Time (START TIME)
  • E: Duration to Next Irrigation (NEXT START)
  • F: Irrigation Frequency (HOW OFTEN)

Key Functions and Buttons

  • NOW: Displays the current time.
  • START TIME: Set the desired time for irrigation to begin.
  • HOW LONG: Adjust the duration of each watering cycle. Can be set from 1 second to 59 seconds, or 1 minute to 99 minutes.
  • HOW OFTEN: Set the frequency of watering cycles. Can be set from 1 hour to 23 hours, or 1 day to 15 days.
  • NEXT START: Indicates the remaining time until the next scheduled irrigation.
  • DELAY: Postpone the start of the next watering cycle.
  • CHILD LOCK: Prevents accidental changes to settings.
  • MANUAL: Allows for immediate, unscheduled watering.
  • OFF/ESC: Turns off the timer or exits current settings.
  • OK: Confirms selections and settings.
  • Gear Icon: Accesses settings menu.
Image showing additional functions: Delay, Child Lock, Manual, OFF/ESC

Figure 7: Additional Functions of the Water Timer

Programming Your Timer

Programs are set based on a logical sequence. Use the 'OK' button to confirm selections and the '+' and '-' buttons to adjust values.

Image demonstrating easy installation, setting, and the large display

Figure 8: Easy Installation and Setting Interface

Diagram illustrating watering duration and frequency settings

Figure 9: Setting Watering Duration and Frequency

The timer supports both automatic and manual watering modes, providing flexibility for your gardening needs.

Image comparing automatic and manual watering modes

Figure 10: Automatic vs. Manual Watering

Maintenance

  • Battery Replacement: When the battery indicator on the display shows low power, replace the two 'AA' alkaline batteries promptly to ensure continuous operation. The valve will close if the timer power runs out.
  • Filter Cleaning: Regularly check and clean the removable filter to prevent blockages and ensure a steady flow of clean water to your irrigation system.
  • Winter Storage: Before freezing temperatures, disconnect the timer from the faucet, remove batteries, and store the unit indoors in a dry, protected area.
  • Leak Hole Design: The timer is designed with a leak hole to protect internal components. Do not obstruct this hole.
Image showing removable filter and leak hole design

Figure 11: Removable Filter and Leak Hole Design for Protection

Image highlighting ABS casing, super thick nylon pipe, and IPX5 rating

Figure 12: Reliable Gardening Helper Features

Troubleshooting

  • Timer not turning on: Check if batteries are installed correctly and are not depleted. Replace with fresh alkaline batteries if necessary.
  • No water flow: Ensure the faucet is fully open. Check for blockages in the filter or hose. Verify that the timer is programmed correctly and not in 'OFF' mode.
  • Water leaking from connections: Ensure all connections are tightened securely. Check that O-rings are properly seated and not damaged. Replace O-rings if worn.
  • Incorrect watering schedule: Review your programmed 'START TIME', 'HOW LONG', and 'HOW OFTEN' settings. Ensure the current time is set accurately.
  • Display is blank or dim: Replace batteries. If the issue persists, contact customer support.

Warranty and Support

For warranty information, technical support, or further assistance, please refer to the contact details provided by your retailer or the manufacturer. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.