MACHENIKE G5 Pro Max Gaming Controller

Introduction

Thank you for choosing the MACHENIKE G5 Pro Max Gaming Controller. This manual provides detailed instructions for setting up, operating, and maintaining your new gaming controller. Please read this manual thoroughly before use and keep it for future reference to ensure optimal performance and longevity of your device.

For the most up-to-date information and firmware updates, please visit the official MACHENIKE website: https://global.machenike.com/

Packing Contents

Please check and confirm all accessories are included in your package:

• 1 x MACHENIKE G5 Pro Max Controller
• 1 x Controller Stand (Charging Dock)
• 1 x USB Data Cable
• 1 x 2.4G Dongle
• 1 x User Manual
• 1 x Certificate Of Compliance
• Thumbsticks: 2 x classic (pre-installed), 2 x short, 2 x tall

Controller Overview

Front Button Layout

• BACK Button (☒)
• Left Joystick (LS/L3)
• Directional Pad
• HOME Button
• FN Indicator Light
• ABXY Buttons
• Right Joystick (RS/R3)
• MENU Button (≡)

Top and Rear Button Layout

• Trigger LT (L2)
• Bumper LB (L1)
• Trigger RT (R2)
• Bumper RB (R1)
• Connection Mode (Platform) Toggle Switch
• M1 Programmable Button
• M2 Programmable Button
• Charging Contacts

Setup and Connection

One-Touch Wake Function & Pairing Modes

Before establishing a wireless connection, select the corresponding device mode using the toggle switch on the rear of the controller.

• 2.4G Mode: Automatically matched based on the connected device; Indicator 1# flashes.
• PC Mode: Device Name: Xbox Wireless Controller; Indicator 2# flashes.
• Switch Mode: Device Name: Pro Controller; Indicator 3# flashes.
• Mobile Mode: Device Name: Xbox Wireless Controller; Indicator 4# flashes.

Entering Pairing Mode: Press and hold the Home button for 5 seconds while the controller is powered off. The indicator light will flash rapidly, indicating pairing mode. Connect to the corresponding device name.

Switching Paired Devices: After powering off the controller (press and hold Home button for 5 seconds), select the desired mode, then long-press the Home button to re-enter pairing mode for the new device.

Controller Sleep/Reconnection: During wireless connections (Bluetooth/2.4G), the controller will automatically power off and enter sleep mode if left idle for 10 minutes. To reconnect, simply press the Home button to wake the controller; it will automatically reconnect to the last paired device.

Connecting in 2.4G Mode (PC, Switch, Android TV)

The 2.4G dongle can automatically detect PC mode/Switch mode. You can manually switch between PC mode, Switch mode, and Dinput mode by pressing and holding [BACK] + [MENU] for 3 seconds.

1. With the controller powered off, set the Mode Toggle Switch to the 2.4G position.
2. Insert the 2.4G receiver into the USB port of your device. Click the button at the rear of the receiver. The indicator light will flash rapidly, entering pairing mode.
3. Press and hold the Home button on the controller for approximately 5 seconds until indicator 1# rapidly flashes, indicating the controller is in pairing mode.
4. The controller will automatically pair when brought close to the receiver. Successful pairing is indicated by vibration. The controller's indicator light will stay lit for 3 seconds to display real-time battery status, and the receiver's indicator light at the rear will remain on.

Connecting to PC (Bluetooth)

In PC mode, when connected via Bluetooth, the controller supports native trigger vibration in games (trigger vibration mode needs to be switched to native mode).

1. With the controller powered off, set the Mode Toggle Switch to the PC position.
2. Press and hold the Home button for approximately 5 seconds until indicator 2# rapidly flashes, indicating the controller is in pairing mode.
3. On your Windows system, go to Settings > Devices > Bluetooth & other devices > Add a device > Bluetooth.
4. From the list of discovered Bluetooth devices, select "Xbox Wireless Controller". Once successfully paired, the 2# indicator light will stay lit for 3 seconds to display real-time battery status.

Connecting to PC (Wired)

1. With the controller powered off, set the Mode Toggle Switch to the PC position.
2. Use the provided data cable to directly connect the controller to your PC. It will be ready for use.

Connecting to Nintendo Switch

Features in Switch Mode:

• You can switch to the Switch button layout by long-pressing the combination key FN + A for 3 seconds. The controller will vibrate once as confirmation.
• Supports the Home button to wake up the controller and the remote console.
• Supports gyroscopic function, which needs to be enabled in games that support this feature in their settings.

Bluetooth Connection Steps (Switch)

1. With the controller powered off, set the Mode Toggle Switch to the SWITCH position.
2. Press and hold the Home button for about 5 seconds until the 3# indicator light rapidly flashes, indicating the controller is in pairing mode.
3. On the Switch home screen, open Controller Settings and select "Change Grip/Order", then wait for the controller to appear.

Wired Connection Steps (Switch)

1. In the Switch settings, enable the wired controller function.
2. Insert the Switch console into the official multifunctional dock.
3. With the controller powered off, set the Mode Toggle Switch to the SWITCH position.
4. Use the provided data cable to directly connect the controller to the Switch dock. It will be ready for use.

Connecting to Mobile Devices (iOS/Android/Tablet/Huawei Phone)

Bluetooth Connection Steps (Mobile)

1. With the controller powered off, set the Mode Toggle Switch to the PHONE position.
2. Press and hold the Home button for about 5 seconds until the 4# indicator light rapidly flashes, indicating the controller is in pairing mode.
3. Open your device's settings, go to Bluetooth, search for devices, and connect to "Xbox Wireless Controller."
4. After successful pairing, the 4# indicator light will stay on for 3 seconds to display real-time battery status.

Operating Instructions

Controller Battery Status Display

• Battery Indicator: The four channel indicator lights display the remaining battery level of the controller.
• Charging Indicator: During the charging process, the corresponding channel indicator light will blink. Once fully charged, all four channel indicator lights will stay on for about 1 minute and then turn off.
• The controller has a built-in 600mAh lithium battery with an estimated battery life of 5-8 hours.

Note: During pairing and some function adjustments, the channel indicator lights will temporarily serve as function indicators. They will return to battery level display after approximately 3 seconds. When using a wired connection, the lights display real-time charging status; in wireless mode, they display real-time battery level.

Combination Buttons

When using combination keys, it is essential to follow the specified button sequence; otherwise, switching may not work correctly.

Note on Trigger Vibration Modes:

• Travel Mode: Trigger vibration intensity follows trigger press depth.
• Native Mode: Only supported for Bluetooth-connected computers, supports native trigger vibration in games.
• Shared Vibration Mode: Trigger vibration intensity follows hand grip vibration intensity.

Note on Light Color: If you adjust the controller's light color in the Keylinker app, it will override the controller's light color. To switch back to the original light, use the controller's light mode combination keys.

Hall System Calibration (Joystick and Trigger)

Important: During calibration, gently move the joystick and lightly press the trigger to their fullest extent to avoid joystick/trigger issues.

1. With the controller powered off, press and hold the [BACK] + [Home] + [B] buttons simultaneously to turn on calibration.
2. Joystick Calibration: Fully move the joystick left and right slowly, and rotate it more than three times.
3. Trigger Calibration: Press the [LT] and [RT] buttons to the bottom more than once.
4. Press the [MENU] button to complete the calibration.

Motion Sensing Calibration

1. Simultaneously press the [BACK] + [A] + [HOME] buttons to activate the calibration function.
2. Place the controller flat on a stable, level tabletop.
3. Press the [MENU] button to initiate automatic calibration.
4. Wait for the controller to automatically power off. This indicates that the calibration process has been completed.

Advanced Functionality

Programming Buttons Macros

Controller Operation:

1. With the controller already connected, simultaneously press the FN key + M1/M2 key. The decorative light strip will continuously flash, indicating that you've entered the recording mode. If it doesn't flash, please repeat this operation.
2. Sequentially input the function keys you want to set for the macro.
3. After setting is complete, briefly press the corresponding macro key (M1/M2). The decorative light strip backlight will stop flashing and return to the previous mode, indicating that the configuration is complete.

Note: Clearing the current M1 macro definition: While the controller is in working status, simultaneously press FN + M1. The decorative light strip will continuously flash, and then press the M1 key once more. The decorative light strip will stop flashing, clearing the current custom function. The same steps apply to clearing other macro keys.

TURBO Function

Supported TURBO buttons: A/B/X/Y/LB/LT/RB/RT

Manual TURBO Function: When the manual TURBO function is enabled for a button (e.g., A button), you need to manually hold down that button to activate continuous fire.

To enable the TURBO function:

1. Press and hold FN + A and then release it. At this point, the A button activates the manual continuous fire function.
2. Press FN + A again. Now, the A button activates the automatic continuous fire function.
3. Press FN + A once more to disable the continuous fire function.

Note: FN + A/B/X/Y/LB/LT/RB/RT can be used to enable the TURBO function for the corresponding buttons. When buttons are in continuous fire mode, the Home button indicator light will flash in synchronization.

Keylinker App for Customized Functions

For more customized functions and settings, you can adjust them in the Keylinker app.

APP Download for Android/HarmonyOS/iOS:

1. Download the app and related firmware updates from the Machenike official website: https://global.machenike.com/
2. Alternatively, scan the QR code below using your browser to access the download page.
3. For HarmonyOS, please download the Android version of the app.

Keylinker App Connection Steps:

1. After correctly installing the Keylinker software on your phone, confirm the relevant permissions prompts that appear when you first start the app.
2. Start the controller in any mode, and you can find "G5Pro Max" on the Keylinker app's main page.
3. Click "G5Pro Max" to connect and enter the customization interface.

Note: This feature, except for direct connection mode, can be used in any connection mode and can be connected to multiple devices simultaneously. For example, you can change the controller settings on your phone while it is connected to a computer.

Dock Function Introduction

Ensure the charging dock is connected to a power source or device for the following operations to work.

• Light Control Button: Single-click to switch between light modes. Long-press for continuous adjustment of light brightness.
• USB 2.0 Ports: For connecting other devices.
• Type-C Power Input: For powering the dock.

Smart Start and Stop (with Dock)

• When the controller is removed from the dock, it automatically wakes up.
• When the controller is placed on the dock, it enters sleep mode and starts charging.

Light Linkage (with Dock)

When the controller is placed on the dock, the controller's lights can synchronize with the dock's lights. You can also control both the controller and dock lights simultaneously using the controller's combination key [FN] + D-Pad [→] or the dock's light control button.

Maintenance

To ensure the longevity and optimal performance of your MACHENIKE G5 Pro Max Gaming Controller, please follow these general maintenance guidelines:

• Keep the controller and charging dock clean by wiping them with a soft, dry cloth.
• Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
• Do not use harsh chemicals or abrasive cleaners on the controller.
• Store the controller in a safe place when not in use to prevent accidental damage.
• Avoid dropping or subjecting the controller to strong impacts.

Troubleshooting

Controller Reset

If the controller becomes unresponsive or unable to identify the working mode during operation or access, try the following steps:

• Pull out the USB cable (if connected) and reconnect it.
• Use the manual mode selection to switch to the corresponding working mode.
• If the problem persists, long press the [FN] button for 10 seconds to perform a hard reset.
• Check the compatibility of your operating system and equipment with the controller.
• If the issue still cannot be resolved, please contact customer service.

Common Issues & Solutions

• Controller not pairing: Ensure the controller is in the correct mode (2.4G, PC, Switch, Phone) and in pairing mode (indicator light flashing rapidly). Check your device's Bluetooth settings.
• Vibration not working as expected: Verify the Trigger Vibration Mode settings using the combination buttons. For Native Mode, ensure you are connected to a Bluetooth-enabled PC and the game supports native vibration.
• Joystick drift or inaccurate triggers: Perform the Hall System Calibration as described in the 'Operating Instructions' section.
• Keylinker App not connecting: Ensure the app has all necessary permissions on your phone. Restart both the controller and the app.

Specifications

Control Section Details

• Direction buttons (1 group): Up, down, left, right, and four corners (eight-direction cross key).
• Function control buttons (4): Xbox layout ABXY buttons.
• HOME button (1): Turns on/off the controller or executes instructions from the console.
• Hall Linear Joystick (2): Elite joystick, 360-degree no dead zone precise operation.
• Function buttons (4): L1, R1, L2, R2. Linear trigger, multiple game matching.
• FN Button (1): Supports screenshot and light strip settings under different modes and other function settings.
• Programming buttons (2): M1, M2 back buttons can customize the required keys.
• Back button (1): Returns to the previous menu, or [-] function.
• Menu button (1): Opens the menu interface, or [+] function.
• Mode toggle switch: Switches the controller mode to adapt to different devices.

Terminal Section

• DCIN wired device connection: USB-A to Type-C
• USB cable length: About 2.0 meters

User Tips

• The G5 Pro Max model is designed with advanced features, offering an enhanced experience over standard 'Pro' models.
• The controller comes complete with essential accessories, including additional analog stick options, a charging dock, and a 2.4G dongle, ensuring you have everything needed for various setups.
• Utilize the Keylinker app for fine-tuning settings and customizing your gaming experience, even while the controller is connected to another device like a PC.
• Remember to perform Hall System Calibration if you notice any joystick drift or trigger inaccuracies to maintain precision.

Warranty and Support

MACHENIKE Product Warranty Promise

Under the condition that the user correctly uses this product according to the technical instructions, this product is covered by a one-year free warranty from the date of purchase.

Free warranty service will not be provided for faults caused by personal reasons, including but not limited to:

• Unauthorized disassembly or modification of the product.
• Damage caused by accidental drops, impacts, liquid ingress, or incorrect power supply specifications during use or transportation.
• Faults caused by lack of reasonable maintenance.
• Failure to operate according to the instructions in the user manual.
• Faults or damage caused by third-party products, services, or actions.

To claim free warranty service, you must provide a clear, complete, and accurate sales invoice and warranty card. When purchasing the product, you can request the seller to provide these documents.

Repair services outside the scope of the warranty will be charged according to regulations.

Official Website and Firmware Updates

Please consult customer service or the brand's official website for updates to the product firmware without prior notice.

MACHENIKE Official Website: https://global.machenike.com/

Compliance Information

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Waste Electrical and Electronic Products Recycling and Disposal Regulations

MACHENIKE advocates for environmentally friendly and low-carbon consumption. Users of this product are advised to comply with national waste electrical and electronic product recycling and disposal regulations when the product is no longer needed. Please hand it over to a nationally recognized recycling facility to reduce resource waste and protect the environment.

Hazardous Substances Table:

This table is prepared in accordance with SJ/T 11364.

• O: Indicates that the concentration of the hazardous substance in all homogeneous materials for this part is below the limit requirements specified in GB/T 26572.
• X: Indicates that the concentration of the hazardous substance in at least one homogeneous material for this part exceeds the limit requirements specified in GB/T 26572.

Due to current international and domestic industry technical levels, a small number of components in this product may still contain restricted substances. During the environmental protection use period, the product will not leak, precipitate, or otherwise affect consumer health. Please use with confidence.

Printed Circuit Board Assembly: Includes printed circuit boards and their components, electronic components, etc. Depending on the product model, the product you purchased may not contain all of these components.

10 In China, electronic and electrical products sold must be marked with this logo. The number inside the logo represents the environmental protection use period of the product under normal operating conditions.

Copyright Information

• PlayStation is a registered trademark of Sony Interactive Entertainment (SIE).
• XBOX/Windows is a registered trademark of Microsoft Corporation.
• Android is a trademark of Google Inc.
• Nintendo Switch is a registered trademark of Nintendo Co.
• macOS is a registered trademark of Apple Inc. in the United States and other countries.
• Other system and product names appearing in this document are generally registered trademarks or trademarks of their respective developer companies. Please note that the ™ logo and ® logos do not appear in this document.