JACK H5

Contents

JACK H5 Industrial Leather Sewing Machine

Model: H5

Introduction

This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your JACK H5 Industrial Leather Sewing Machine. The JACK H5 is a robust flat-bed industrial sewing machine featuring a composite feed mechanism, specifically designed for sewing thick materials such as leather, upholstery, and heavy fabrics with a reliable lock stitch formation.

Safety Instructions

  • Always disconnect the machine from the power supply before cleaning, lubricating, or performing any maintenance.
  • Keep fingers and loose clothing away from the needle, presser foot, and handwheel during operation.
  • Ensure the machine is placed on a stable, level surface.
  • Do not operate the machine if any parts are damaged or missing.
  • Use only recommended needles and threads for the material being sewn.
  • This machine operates on 220V 750W power. Ensure your power supply matches these requirements.

Product Overview

The JACK H5 is engineered for durability and precision in heavy-duty sewing applications. Key components include the needle bar, presser foot, thread tension assembly, stitch length adjustment dial, and an integrated control panel for speed and function settings.

Overall view of the JACK H5 industrial sewing machine
Figure 1: Overall view of the JACK H5 industrial sewing machine.
Side view of the JACK H5 sewing machine, highlighting the JACK logo and H5 model
Figure 2: Side view of the JACK H5 sewing machine, highlighting the JACK logo and H5 model.
Close-up of the needle and presser foot area of the JACK H5
Figure 3: Close-up of the needle and presser foot area, showing the working mechanism.
Close-up of the control panel and stitch length dial on the JACK H5
Figure 4: Close-up of the control panel and stitch length adjustment dial.

Specifications

FeatureSpecification
Model NumberH5
TypeIndustrial Sewing Machine
Stitch FormationLock Stitch
Feed MechanismMultiple (Composite Feed)
Mechanical ConfigurationFlat-Bed
Max. Sewing Speed3000 stitches per minute
Max. Sewing Thickness8mm
Stitch LengthUp to 8MM
Power (W)220V 750W
Is ElectricYes
Weight45 kg (approximate machine head weight)
OriginMainland China

Setup

1. Assembly

The JACK H5 machine head typically arrives separately from its table and motor. Follow the assembly instructions provided with your specific table and motor kit. Ensure all components are securely fastened and aligned.

2. Power Connection

Connect the machine to a stable 220V power outlet. Verify that the motor's power rating matches the machine's requirements (750W). Improper voltage can damage the machine.

3. Needle Installation

  • Turn the handwheel to raise the needle bar to its highest position.
  • Loosen the needle clamp screw.
  • Insert the new needle with the flat side facing away from you (or as indicated by the machine's design) until it reaches the stopper.
  • Tighten the needle clamp screw securely.

4. Bobbin Winding and Insertion

Refer to the specific bobbin winding mechanism on your machine. Generally, thread the bobbin with the desired thread, place it on the bobbin winder spindle, and engage the winder. Once wound, insert the bobbin into the bobbin case, ensuring the thread feeds correctly through the tension spring, and then insert the bobbin case into the shuttle hook assembly.

5. Threading the Machine

Follow the numbered thread guides on the machine, starting from the spool pin, through the tension discs, take-up lever, and finally through the needle eye. Ensure the thread is seated correctly in all guides and tension components. A diagram of the thread path is usually printed on the machine or in a quick-start guide.

Front view of the needle bar and thread guides on the JACK H5
Figure 5: Front view of the needle bar and thread guides, illustrating the initial threading points.
Top-down view of the machine head, showing the thread path
Figure 6: Top-down view of the machine head, showing the general thread path from spool to needle.

Operating Instructions

1. Power On/Off

Turn on the main power switch, usually located on the motor or control box. The control panel display should illuminate.

2. Adjusting Stitch Length

Rotate the stitch length adjustment dial (refer to Figure 4) to select the desired stitch length. The dial is typically marked with numerical values corresponding to millimeters.

3. Speed Control

Use the control panel buttons (refer to Figure 4) to adjust the maximum sewing speed. The display will show the current speed setting. The foot pedal will then control the speed up to this set maximum.

4. Sewing

  • Place the material under the presser foot.
  • Lower the presser foot using the knee lift or lever.
  • Gently press the foot pedal to start sewing. The composite feed mechanism will ensure smooth feeding of thick materials.
  • Guide the material evenly.
  • To stop, release the foot pedal. Raise the needle to its highest position, lift the presser foot, and remove the material.

5. Reverse Stitching

Engage the reverse lever or button (if available on your model's control panel) to sew in reverse, typically used for securing stitches at the beginning and end of a seam.

Maintenance

1. Cleaning

  • Regularly clean lint and dust from the bobbin area, feed dogs, and needle plate using a brush or vacuum.
  • Wipe down the machine exterior with a soft, dry cloth.

2. Lubrication

The JACK H5 is an industrial machine and requires regular lubrication. Consult your machine's specific lubrication points and schedule, typically found in a detailed service manual. Use only high-quality sewing machine oil.

3. Needle Replacement

Replace needles frequently, especially when sewing thick or tough materials, or if you notice skipped stitches or thread breakage. A dull or bent needle can damage fabric and the machine.

4. Belt Tension

Periodically check the motor belt tension. It should be taut enough to prevent slipping but not so tight as to strain the motor bearings.

Troubleshooting

  • Skipped Stitches: Check needle installation (flat side correct?), needle size (appropriate for thread/fabric?), and ensure the needle is not bent or dull. Re-thread the machine.
  • Thread Breakage: Verify correct threading path, check for burrs on thread guides or needle eye, ensure proper thread tension, and use good quality thread.
  • Uneven Stitches: Adjust upper and lower thread tension. Ensure the material is feeding smoothly and not being pulled or pushed excessively.
  • Machine Not Starting: Check power connection, ensure the main power switch is on, and verify the foot pedal connection.

User Tips

  • The JACK H5 features a 'composite feed' mechanism, which is a robust transport system similar to 'triple feed' or 'walking foot' systems. This ensures that multiple layers of thick material are fed evenly without shifting, making it ideal for leather and heavy fabrics.
  • This specific model, the H5, is a single-needle machine. If you require a two-needle setup, a different model would be necessary.
  • For optimal performance with leather, use specialized leather needles and strong, bonded nylon or polyester threads.
  • Always test stitch settings on a scrap piece of your material before beginning your project.

Warranty and Support

For warranty information, please refer to the terms provided at the time of purchase. In case of technical issues or if you require assistance beyond the scope of this manual, please contact your authorized JACK dealer or the seller for support. Provide your machine's model number (H5) and serial number when seeking assistance.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.