RIDEN RD6030

Contents

RIDEN RD6030/RD6030-W Digital Control DC Power Supply User Manual

Model: RD6030 / RD6030-W

Date: 2024.06.18

Introduction

Thank you for purchasing the constant voltage constant current DC power supply produced by Hangzhou Ruideng Technology Co., Ltd. This manual provides detailed instructions to help you understand the full functionality of this product, ensure a better experience, and prevent misuse. Please read it carefully before use and keep it for future reference.

Note: This instruction corresponds to firmware versions RD6006(V1.42), RD6012(V1.37), RD6018(V1.39), RD6024(V1.40), RD6030(V1.43), RD6006P(V1.45), RD6012P(V1.49). Page layouts and operations may vary slightly with different firmware versions. We recommend downloading the latest firmware for the best experience.

Video: Overview of the RIDEN RD6030/RD6030-W Digital Control Power Supply, showcasing its high current capabilities, various display styles, and connectivity options.

Technical Specifications

The RD6030/RD6030-W is a high-performance digital control DC power supply. Key specifications are detailed below:

Parameter Value
ModelRD6030/RD6030-W
Input Voltage Range7-70.00V DC
Output Voltage Range0-60.00V
Output Current Range0-30.00A
Output Power Range0-1800W
Input Voltage Measurement Resolution0.01V
Output Voltage Resolution0.01V
Output Current Resolution0.01A
Battery Voltage Resolution0.01V
Input Voltage Measurement Accuracy±(1%+5 digits)
Output Voltage Accuracy±(0.3%+3 digits)
Output Current Accuracy±(0.5%+5 digits)
Battery Voltage Measurement Accuracy±(0.5%+3 digits)
Default Cutoff Current Value (Charging)100mA
Output Ripple Typical (VPP)50mV@15A, 90mV@30A
Working Temperature Range-10℃ ~ 40℃
External Sensor Temperature Detection Range-10℃ ~ 100℃ / 0℉ ~ 200℉
External Sensor Temperature Detection Accuracy±3℃ / ±6℉
Constant Voltage Mode Response Time2ms (0.1A-5A Load)
Constant Voltage Mode Load Regulation±(0.1%+2 digits)
Constant Current Mode Load Regulation±(0.1%+3 digits)
Capacity Measurement Range0-9999.99Ah
Energy Measurement Range0-9999.99Wh
Capacity and Energy Statistical Error±2%
Buck Working Mode(Input Voltage ÷ 1.1) - 1
Over Temperature ProtectionSystem temperature > 80℃
Screen Brightness Setting0-5 (6 levels in total)
Screen2.4 inch color HD display
Product Dimension167*81*69mm
Cooling Fan Start ConditionOutput current > 8A or System temperature > 45℃
Cooling Fan Shut Down ConditionOutput current < 7.9A and System temperature < 40℃

Note: Ripple measurement method involves measuring noise and ripple at X1 range, AC coupling, 20 MHz bandwidth on an oscilloscope with a 0.1uF parallel capacitor at the output terminals.

Detailed specifications table for RD6030 and other RD series models

Image: Detailed comparison table of RD series models, including RD6030, highlighting input/output ranges, resolutions, and other parameters.

Product dimensions diagram for RD6030

Image: Diagram showing the physical dimensions of the RD6030 module and its packaging.

Setup and Installation

1. Package Contents

The product is packaged in a square carton with a plastic sealing film. Inside, you will find the RD power supply module and an instruction card (scan QR code for full instructions). Accessories typically include:

  • RD power supply module
  • Backup fuse (10A max for temporary use)
  • External temperature sensor cable (10K B3950)
  • WiFi/RS485 board (for -W models, ordered separately)
All-in-one design showing RD6030, PSU, and S800 case

Image: Illustration of the RD6030 module, a compatible PSU, and the S800 case, demonstrating an all-in-one setup.

2. Panel Overview

Familiarize yourself with the front and back panels of the RD6030 module:

Front view of RD6030 Digital Control Power Supply

Image: Front panel of the RD6030, showing the display, control buttons, encoder, and output terminals.

Front Panel Controls:

  • A: Power button
  • B: SHIFT Second function button
  • C: Quick storage button
  • D: Current/Over current protection setting
  • E: Voltage/Over voltage protection setting
  • F: Micro USB port
  • G: Power supply output negative terminal / Battery charging negative terminal
  • H: Battery charging positive terminal (Dedicated terminal for battery charging)
  • I: Power supply output positive terminal (connect 4mm banana plug)
  • J: Output ON/OFF switch
  • K: Enter/Confirm button
  • L: Encoder potentiometer (rotate for value change, press to cancel)
  • M: Direction button
  • N: Keypad
  • O: Screen

Back Panel Connections:

Internal view of RD6030 showing input/output terminals, fuses, and communication interfaces

Image: Internal view of the RD6030 back panel, highlighting input/output terminals, fuses, fan socket, temperature sensor socket, and communication interfaces.

  • P: Input fuse (Type: 1808)
  • Q: Output fuse (Type: 1032 fast blow fuse for RD6030)
  • R: Power source input interface (HT508K/K14)
  • S: External temperature sensor interface (XH2.54-2P)
  • T: CR1220 battery socket
  • U: Communication module interface (WiFi or RS485 board)
  • V: Fan interface (cannot add or replace other fan)
  • W: Remote sampling switch (only for RD6006P)
  • X: Remote sampling terminal (only for RD6006P)

Important: The power source input interface (R) must be connected to a 7-70V constant DC power source. If the input voltage exceeds 72V, the output will automatically turn off, and an alarm will be displayed. If the input voltage exceeds 100V, the product may be damaged. The external temperature sensor cable (S) must be connected to the external temperature sensor interface. Only connect cables if you have a foundation in electronic and electrical engineering, and ensure reliable grounding to prevent leakage.

Correct installation method for the RD6030 module into a case

Image: Correct installation of the RD6030 module into a case, showing proper alignment and secure fitting.

3. Power Supply Unit (PSU) Recommendations

If you are using an external PSU, ensure it is compatible and properly grounded. It is recommended to use custom PSUs or famous brand PSUs. Avoid using unstable power sources like electric bike chargers or modified PSUs, as they can output high voltages and damage your load.

Note about 1500W PSU: A 1500W PSU provides 1500W output with 220V AC input, allowing RD6030 to output up to 1440W. However, with 110V AC input, it only provides 1200W, limiting RD6030 output to 1140W. Choose your PSU carefully based on your AC input voltage.

Recommended and not recommended power supply units for RD series

Image: Visual guide for recommended and not recommended power supply units, emphasizing the importance of stable and appropriate PSUs.

Before connecting any PSU to the RD6030, use a multimeter to check if its output voltage is stable and matches the rated voltage. If the output is abnormal, contact support immediately and do not connect it to the RD power supply to prevent damage.

Operation Instructions

1. Main Page Overview

After powering on, the device will display a boot image and then enter the main page. The main page shows various parameters and settings.

Display style options for RD6030: Classic, Detailed, and Curve styles

Image: The RD6030 display showing Classic, Detailed, and Curve styles, which can be switched by pressing the 'M' button.

Display Styles:

On the main page, you can press the 'M' button to switch between Traditional Style, Detail Style, and Curve Style. In Curve Style mode, rotate the encoder potentiometer to scale the vertical coordinate of the curve. Press 'ENTER' to pause/start curve recording.

2. Setting Output Voltage and Current

To set the output voltage (AL) or current (AK):

  • Press the 'I-SET' button to set the output current value (AK).
  • Press the 'V-SET' button to set the output voltage value (AL).
  • Use the encoder potentiometer to adjust the value directly.
  • Alternatively, use the keypad (N) to type in the value and press 'ENTER' to confirm.
  • If a value exceeds the limit, an error message will be displayed. Rotate the encoder to cancel.

You can also set over-current protection (AI) by pressing 'SHIFT' + 'I-SET', and over-voltage protection (AJ) by pressing 'SHIFT' + 'V-SET'. The over-current protection value should be higher than the set output current value for auto cut-off to function.

3. Battery Charging Function

The RD6030 can be used for battery charging. Connect the battery's positive electrode to the green terminal (H: Battery charging positive terminal) and the negative electrode to the black terminal (G: Battery charging negative terminal). The AG: battery charging indicator will turn red when connected and green when charging starts.

Important: The charging function is a temporary replacement, not for long-term use. Always use the original charger for your battery. Incorrect charging can lead to fire or explosion. You must know your battery parameters well before using this function.

The output will automatically cut off if the actual output current is lower than the set cut-off current value (default 10mA) or if the external temperature sensor detects a temperature higher than the cut-off temperature value.

4. Data Group Quick Storage and Recall

You can store and recall up to 10 data groups (M0-M9) for quick access to frequently used voltage, current, and protection settings.

  • To Store: Press 'MEM' + keypad button (1-9) to store the current AL, AK, AJ, AI, and AQ settings into the corresponding data group. Press 'ENTER' to confirm.
  • To Recall: Press 'SHIFT' + keypad button (1-9) to quickly call out saved data. Press 'ENTER' to confirm.

5. Keypad Lock and Unlock

Press 'SHIFT' + 'LOCK' to lock or unlock the keypad. The keypad will automatically lock when communication starts. An 'AO: Button lock' status will be displayed. The A: power button can still be used, but other buttons will be inactive. The keypad unlocks automatically after 3 seconds when communication is disconnected.

6. System Settings

Press 'SHIFT' + '0' to enter the system setting menu. Use the direction buttons (M) and encoder potentiometer (L) to navigate and change settings. Press 'ENTER' to confirm or enter sub-menus.

Key System Settings:

  • Language: Set to English, Simplified Chinese, French, German, or Russian.
  • Take OK: (ON by default) Prompts for confirmation when recalling a data group. Set to OFF to apply settings directly.
  • Take Out: (OFF by default) Keeps previous output status when recalling a data group. Set to ON to output directly.
  • Boot Power: (OFF by default) If ON, the device automatically turns on output after booting.
  • Boot Logo: (ON by default) Displays boot logo. Set to OFF to enter main interface directly.
  • Buzzer: (ON by default) Provides button feedback.
  • Backlight: Adjustable from level 0-5.
  • Update Rate: Sets the refresh rate for real output voltage and current (Low/Mid/High).
  • Max Power: Set between 0-740W (default 740W). For RD6030, max power is 1800W.
  • Temperature Unit: Switch between °C and °F.
  • Battery Charger Sub-menu: Adjust Cut-Off Current (default 10mA) and Cut-Off Temp (default 60℃).
  • Communication Sub-menu: Set interface to USB, WIFI, or RS485. Address (001-255) and Baud rate must match PC software/APP settings.
  • Date and Time Sub-Menu: Set date and time (Year 2000-2100).
  • Custom Colors: Customize display colors for various parameters. Turn on 'Custom Colors' option to apply.

7. PC Software Operation

The PC software allows monitoring and control of the power supply. It supports Windows 7-10. Download the software from the official link provided in the manual PDF.

Note: The PC software is designed by Hangzhou Ruideng Technology Co., Ltd. It has no virus. If your antivirus software flags it, please allow all features for normal operation. If you experience incompatibilities, please test the software before purchasing the product.

RD6030 connected to PC software for monitoring and control

Image: The RD6030 connected to a computer running the PC software, showing the interface for control and data visualization.

PC Software Installation:

  1. Download the software ZIP file.
  2. Install the CH341SER driver for USB communication. Verify installation in Device Manager (USB-SERIAL CH340).
  3. Unzip the software to a PC disk (e.g., Disk D).
  4. Run 'Net framework4.7.2.exe' to install the .Net environment.
  5. Run 'RidenPowerSupply.exe' to launch the software.

PC Software Connection:

  • USB Connection: Set the RD6030 communication interface to USB. Connect the RD6030 to the PC via a Micro USB cable. The PC software should prompt that the serial port has been updated. Click "Connect".
  • WiFi Connection (RD6030-W only): Set the RD6030-W communication interface to WiFi and restart. On the PC software, click "WiFi Network" to open the configuration interface. Click "Initialize", wait for the RD6030-W to display its local IP address, then click "Next". Enter your WiFi name and password, click "Network distribution", and then "Connect".

PC Software Functions:

The software provides voltage/current preset, data group quick call out, calibration fine tuning, brightness setting, and voltage/current curve exporting. You can rotate the mouse wheel to zoom the curve, double-click to auto-adjust axes, and right-click to clear or export data.

Note: WiFi connection for PC software is a test function and may have poor compatibility with some computers. This function is not guaranteed or technically supported.

8. Mobile APP Operation (RD6030-W only)

The RD6030-W supports mobile APP control via Bluetooth (Android) or WiFi (iOS/Android). Download the APP from the official links provided in the manual PDF.

Mobile APP interface for RD6030-W on Android and iOS devices

Image: Screenshots of the mobile APP interface for RD6030-W, showing control and monitoring features on both Android and iOS platforms.

APP Installation:

  • Android APP: Supports Android 8.0-10.0. Search "Ruideng tech" on Google Play or download from the provided link.
  • iOS APP: Supports iOS 10.0-13.4 (iPhone 6 and above). Search "Ruideng tech" in the Apple App Store.

Important: Do not install or remove the Wi-Fi module when the device is powered on, as it may be damaged. Ensure location and storage services are enabled for the APP.

APP Network Distribution (WiFi):

  1. Insert the WiFi board into the correct position.
  2. Power on the RD6030-W; the blue LED will blink once.
  3. Set the communication interface to WIFI and restart the RD6030-W.
  4. Place the RD6030-W and your mobile phone close to a 2.4G router (phone must be on the same 2.4G network, router must have AP isolation and WMM functions disabled).
  5. On the APP, press "BB" (add device) and choose "RD power series".
  6. Enter your WiFi password and confirm you are using a 2.4G network.
  7. Press "INITIALIZATION" and wait for the connection.
  8. If the IP address is displayed correctly, confirm and wait for the APP to show successful connection.

Troubleshooting WiFi: If network distribution fails, power off the module and re-operate. If using a Huawei phone, turn off the random MAC address function. If the phone's IP address changes, you may need to reset the network by pressing the 'M' button and then 'ENTER'. Consider setting a fixed IP for your phone in the router settings.

9. RS485 Multiple Devices Communication

Use a USB to RS485 module to connect to the AB terminals of the 485 module. Each RD6024 (or similar model) needs a different device address. Up to 32 units can be connected. Different models cannot be connected simultaneously. The host computer enters the RS485 multi-computer communication, clicks search, and then connects after the search is complete.

Maintenance

1. Firmware Updates

Firmware can be upgraded to optimize product experience and add new functions. It is recommended to keep your device updated.

Firmware update process for RD6030 via PC software

Image: Screenshot showing the firmware update interface in the PC software, guiding users through the update process.

Firmware Update Procedure:

  1. Press and hold 'ENTER' and power on the RD6030 to enter boot mode.
  2. Connect the device to a computer. The PC software should indicate "boot mode".
  3. Click "Firmware Update" in the PC software.
  4. Follow the prompts to select the firmware file and click "Now" to upgrade.

Note: Firmware can be updated in normal mode, but if the device cannot start normally, use boot mode. Firmware update is not supported under WiFi connection mode.

2. Boot Logo Update

You can customize the boot logo displayed when the device starts up.

Boot Logo Update Procedure:

  1. Click "Start Logo Update" in the PC software.
  2. Select an image file (samples may be available in the installation package).
  3. The device will reboot automatically after the update.

3. General Care

  • Keep the device clean and free from dust.
  • Avoid exposing the device to extreme temperatures or humidity.
  • Ensure proper ventilation to prevent overheating.
  • When not in use, it is recommended to turn off the AC switch of the PSU.

Troubleshooting & FAQ

Common Issues and Solutions:

Q: What are the differences between RD6030 and RD6030-W?
A: The RD6030-W includes a WiFi board for APP connectivity and PC software via WiFi. The RD6030 does not have a WiFi board and only supports PC software via USB micro cable, with no APP support.
Q: Why does the product I received look slightly different from the picture?
A: We continuously update the product hardware and software to improve the device. Internal material details may vary, but this does not affect functionality.
Q: My input AC to DC switch power supply has a high-frequency noise. Is this normal?
A: Yes, this is normal for industrial-grade switching power supplies. It does not affect performance. This noise can occur when the PSU is unloaded due to PWM control chip behavior. The noise level can vary slightly between units due to transformer production variations. If this is a concern, please consider this before purchase.
Q: Why doesn't the instruction manual come with the product?
A: Due to continuous product updates and firmware changes, the latest instructions are available online to ensure you have the most current information.
Q: The case I received is slightly deformed.
A: During shipping, the case side might become slightly deformed. You can usually adjust it by hand. If this is a significant concern, please consider this before purchase.
Image showing a slightly deformed case, with a red circle highlighting the bend

Image: Example of a slightly deformed case, which can often be corrected manually.

Q: Can I use the RD6030 to power an inductive load?
A: If connecting an inductive load (e.g., a motor), the maximum working voltage and current should not exceed 1/3 of the full range.
Q: There's a fuse in the box. Should I install it?
A: This is a backup fuse. If you accidentally burn the main fuse, you can insert this backup fuse into the socket next to the damaged one for temporary use. Note that the backup fuse supports only up to 10A. For full output, it's best to remove the damaged fuse and solder a new, good fuse in its place.
Q: Can I remove the PSU case for better heat dissipation?
A: No, do not remove the shell of the PSU. Removing the shell alters the heat dissipation system, leading to insufficient cooling and potential damage to components. This will void the after-sales service.
Q: I see some traces on the panel. Does this mean it's damaged?
A: Slight traces at the button holes may occur due to the injection molding process. These are usually hard to notice during normal use and do not indicate damage. If this is a concern, please consider this before purchase.
Close-up of the RD6030 panel showing slight traces around button holes

Image: Close-up of the RD6030 panel, illustrating minor cosmetic traces that may result from the manufacturing process.

Q: The APP crashes on my phone. What's the problem?
A: Incompatibilities can occur with APP and PC software. We recommend downloading and testing the software before purchasing. If you don't test and find issues with software functionality (while the product hardware works), refunds may be refused. PC software supports Win 7 and above. The APP supports Android 8.0+ and iOS 10.0+.
Q: Why can't I connect my RD6030-W to the phone APP via WiFi?
A: Check if the WiFi board is properly inserted. Ensure your WiFi network is 2.4GHz and that client isolation/AP isolation and WMM functions are disabled on your router. Also, verify that location and storage services are enabled for the APP. If problems persist, contact support.
Q: Why can't I connect my RD6030-W to PC via WiFi, but I can connect to my phone?
A: WiFi connection for PC software is a test function and may have poor compatibility with some computers. This function is not guaranteed or technically supported. If it doesn't work, please use the USB connection for PC software.

User Tips

  • Always check PSU output: Before connecting any power supply unit (PSU) to the RD6030, use a multimeter to verify its output voltage and stability. This prevents potential damage to the RD6030.
  • Proper grounding is crucial: Ensure your AC input power supply is properly grounded to avoid leakage and ensure safety.
  • Firmware updates for best experience: Regularly check for and install the latest firmware updates for your device and associated software (PC/APP) to benefit from new features and performance optimizations.
  • Understand battery charging limitations: The battery charging function is for temporary use. For long-term or critical charging, always use a dedicated battery charger. Be aware of your battery's specifications to prevent overcharging or damage.
  • Mind inductive loads: When powering inductive loads like motors, keep the output voltage and current within 1/3 of the device's full range to ensure stable operation and prevent damage.
  • Test software compatibility: If you plan to use the PC software or mobile app, download and test them on your system before making a purchase to ensure compatibility.

Warranty and Support

Hangzhou Ruideng Technology Co., Ltd. provides after-sales support for their products. For any issues or inquiries, please refer to the contact information below:

  • Email: 1749808860@qq.com
  • WhatsApp: +8615868147353
  • QQ Group: 550112838
  • WeChat: 15868147353

Please note that damage caused by incorrect operation, such as exceeding hardware limits during calibration or removing the PSU shell, may not be covered under warranty.

After-sales service options including manufacturer support, remote troubleshooting, repair, and component supply

Image: After-sales service options provided by the manufacturer, including remote support for troubleshooting, repair services, and component supply.

For the full user manual in PDF format, please refer to the official download link: User manual (PDF)


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.