1. Introduction
Thank you for choosing the Ainavi 2 Din Android Car Radio. This multimedia system is designed to enhance your driving experience with advanced features such as wireless Carplay, Android Auto, GPS navigation, and a powerful Android 13 operating system. This manual provides essential information for installation, operation, and maintenance to ensure optimal performance and longevity of your device.
2. Package Contents
Please verify that all items are present in your package:
- Frame + Screen (Main Head Unit)
- Power Cable
- 2 x USB Cables
- Rear Camera Input Cable
- GPS Antenna
- SIM + 4G Antenna (Only for 4G version)

3. Setup and Installation
The Ainavi 2 Din Android Car Radio is designed for plug-and-play installation. However, professional installation is recommended to ensure proper wiring and functionality.
3.1. Pre-Installation Check
- Ensure your vehicle is a Honda Jazz or Fit model from 2008-2013.
- If your car is a Right-hand drive model, please contact customer service for specific frame requirements.
- Take clear pictures of your original car radio and send them to customer service to ensure correct cables are provided.
3.2. Cable Layout and Connection
The system comes with a custom wiring harness for your vehicle. Connect the power cable, USB cables, rear camera input, GPS antenna, and SIM+4G antenna (if applicable) to their respective ports.

Recommended Cable Routing:
- USB Port and SIM Card Slot: Route cables to the storage compartment on the passenger side.
- GPS and 4G Antennas: Install either on the right front portion of the dashboard or within the A-pillar. Position the antenna module's black side facing upwards to optimize signal reception.

3.3. Initial Power-On
After installation, turn on your vehicle's ignition. The car radio should power on automatically. Follow any on-screen prompts for initial setup.
4. Operating Instructions
The Ainavi car radio features an intuitive Android 13 operating system with Ainavi UI 5.0 for a customized user experience.

4.1. Basic Functions
- Wireless Carplay & Android Auto: Enjoy seamless smartphone integration for hands-free calls, music, and navigation. Available on A2, G5, H5, and H6 models. (Note: A1 model does not have Carplay/Android Auto).

Figure 4.2: Carplay and Android Auto interface. - GPS Navigation: The H6 model supports GPS, Galileo, GLONASS, and BeiDou satellite systems for faster and more accurate location tracking.

Figure 4.3: Global Positioning System interface. - FM/AM/RDS Radio: Features a 7708 pre-installed professional radio chip with polycrystaline interference processing and noise filtering for better sound reception.
- Multimedia Entertainment: Supports HD video and lossless music playback. Connect to the internet to watch Netflix, YouTube, Disney+, and other video apps.
- USB Ports: Two USB 2.0 ports are available for connecting USB flash drives or USB driving recorders.
4.2. Advanced Features
- Ainavi UI 5.0: Experience a new level of customization with an intuitive layout and editable shortcuts.
- Day and Night Modes: The system can automatically switch between day and night display modes based on ambient light or vehicle settings.
- Steering Wheel Control (SWC): After installation, you can use your car's steering wheel buttons to control the screen.

Figure 4.4: Steering Wheel Control functionality. - Split Screen: Multitask effortlessly by running two apps simultaneously on a single screen.
Video 4.1: Demonstration of Split Screen functionality, showing video playback and navigation simultaneously. - Digital Theater System (DSP): Offers advanced sound field settings, bass enhancement, and various EQ presets (Classical, Vocal, Jazz, etc.) for a customized audio experience.

Figure 4.5: Digital Theater System (DSP) settings for audio customization. - Gyroscope Function: Provides real-time tilt angle information of the car during driving, improving safety.

Figure 4.6: Gyroscope function display. - 4K Video Playback with Picture-In-Picture (PIP): Supports high-resolution video playback and allows a smaller video window to be displayed while using other applications.
4.3. Connectivity
- 4G+5G WiFi: G5, H5, and H6 models support built-in 4G LTE, GSM, and WCDMA capabilities. A SIM card slot extension cable is provided for convenience. Please note that 4G network compatibility may vary by region.

5. Maintenance
To ensure the longevity and optimal performance of your Ainavi car radio, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that may damage the surface.
- Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Updates can typically be found in the system settings or on the manufacturer's website.
- Cooling Fan: Models H6, H5, and G5 are equipped with a powerful cooling fan. Ensure the fan vents are not obstructed to prevent overheating. The fan helps stabilize CPU temperature, typically around 47°C during continuous operation after 15-30 minutes.

Figure 5.1: Full Lamination Tech and Cooling Fan performance. - Avoid Extreme Temperatures: Do not expose the device to extreme heat or cold, as this can affect its performance and lifespan.
6. Troubleshooting
If you encounter issues with your Ainavi car radio, refer to the following common troubleshooting steps:
- No Power: Check all power connections. Ensure the vehicle's ignition is on. If the issue persists, consult a professional installer.
- No Sound: Verify volume settings on the device and your vehicle's audio system. Check speaker connections. Ensure DSP settings are configured correctly.
- GPS Signal Issues: Ensure the GPS antenna is properly installed and has a clear view of the sky. Check GPS settings in the system.
- Carplay/Android Auto Not Connecting: Ensure your phone's Bluetooth and Wi-Fi are enabled. Try restarting both your phone and the car radio. Verify that your phone is compatible with wireless Carplay/Android Auto.
- Slow Performance: Clear the system cache regularly through the device settings. Close unnecessary background applications.
- Screen Unresponsive: Try restarting the device. If the screen remains unresponsive, contact customer support.
7. Specifications
The Ainavi 2 Din Android Car Radio comes in various models with different specifications. Refer to the table below for detailed information:

| Attribute | Value |
|---|---|
| Brand Name | Ainavi |
| Din | Double Din |
| Operating System | Android 13 |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.7kg |
| Item Size | 10 inch |
| Display Size | 10" |
| Resolution | 1280*720 |
| Is touch screen | Yes |
| Built-in Screen | Yes |
| Max External Memory | 128G |
| Digital Media Format | JPEG, MP4, Mp3, WMA |
| OSD Language | Vietnamese, English, Indonesian, Urdu India, Hindi, Yiddish, Italian, Greek, Hebrew, Ukrainian, Armenian, Hungarian, Spanish, Spain's Basque, Welsh, Turkish, THAI, Swahili, Arabic, Japanese, Albanian, Portuguese, Chinese (Traditional), Chinese (Simplified), Slovenian, Slovak, Serbian, Azeri, Swedish, Macedonian, Malay, Maltese, Romanian, Norwegian, Czech, Lithuanian, Latvian, Latin, Croatian, Dutch, Korean, Haitian Creole, Georgian, Catalan, Galicia, Finnish, Filipino, French, Russian, PERSIAN, Polish, Icelandic, Bulgarian, German, Danish, Boolean text (Dutch South Africa), Belarusian, ESTONIAN, Irish |
| For Vehicle Brands/Model | Honda |
| Honda Model | Fit |
| Fit-Year | 2008, 2009, 2010, 2011, 2012, 2013 |
| Compatible with | Fit 2th JAZZ |
| Carplay | Wireless |
| Android Auto | Wireless |
| Steering wheel control | Support |
| Accessory Type | Frame+Cable |
| Certification | CE, FCC, RoHS, WEEE |
| Material | Glass |
8. User Tips
- Customize Your Home Screen: Ainavi UI 5.0 allows you to add frequently used apps as shortcuts to your desktop for quick access.
- Optimize Sound: Experiment with the DSP settings, including EQ presets and sound field adjustments, to find the audio profile that best suits your preferences and vehicle acoustics.
- Stay Updated: Regularly check for system updates to ensure you have the latest features and security patches.
- Connectivity: For stable wireless Carplay/Android Auto, ensure your phone's Wi-Fi and Bluetooth are active and paired correctly.
9. Warranty and Support
For any technical assistance, warranty claims, or further inquiries, please contact Ainavi Global Store customer service. Ensure you have your product model and purchase details ready when contacting support.





