1. Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your King Kong KK-256 Professional DMX 512 Stage Light Controller. The KK-256 is designed for intuitive control of DMX-compatible lighting fixtures, offering a robust solution for various stage and event lighting applications.
2. Product Overview
The King Kong KK-256 DMX console features a comprehensive layout for efficient lighting control. Familiarize yourself with the main components:
Figure 2.1: Front panel view of the King Kong KK-256 DMX console, showing faders, buttons, and display.
Figure 2.2: Angled view of the King Kong KK-256 DMX console, highlighting the ergonomic layout of controls.
Figure 2.3: Detailed view of the King Kong KK-256 DMX console, illustrating the front panel controls and rear panel connections.
Key Components:
- DMX Output: Standard 3-pin DMX connectors for connecting to lighting fixtures.
- USB Port: For FAT32 supported USB memory devices, likely for saving/loading shows or firmware updates.
- Power Input: "Swift Power in" for connecting the power supply.
- Faders (16): Control individual DMX channels or playback levels.
- Playback Page Buttons: Select different pages of playbacks.
- Unit Buttons: Select individual fixtures or groups of fixtures.
- Scenes Function Buttons: Access and trigger pre-programmed scenes.
- Display: Digital display for showing current settings and parameters (e.g., "256A").
- Control Wheels (SPEED, CROSSFADE): For adjusting chase speed and crossfade times.
- Navigation Buttons (EXIT, ENTER, CLEAR): For menu navigation and command execution.
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | KK-256 |
| DMX512 Channel Number | 256 |
| Number of Fixtures | 16 |
| Channels per Fixture | 32 |
| Playback Capacity | 80 |
| Simultaneous Playbacks | 16 |
| Total Chase Steps | 100 |
| Built-in Shapes | 32 |
| Time Control of Scenes | HTP, LTP |
| Shapes per Scene | 2 |
| Shape Generator | Dimmer, Pan/Tilt, RGB, Color |
| Simultaneous Shapes | 10 |
| USB Memory Support | FAT32 |
| Material | Iron |
| Voltage | 110-240V |
| Net Weight | 4 KG |
| Weight in Carton | 4.5 KG |
| Weight in Flight Case | 10 KG |
4. Setup Instructions
- Unpacking: Carefully remove the KK-256 console from its packaging. Inspect for any signs of damage.
- Power Connection: Connect the provided power cable to the "Swift Power in" port on the rear panel of the console. Plug the other end into a suitable power outlet (110-240V).
- DMX Connection: Connect your DMX-compatible lighting fixtures to the "DMX out" ports on the rear panel using standard DMX cables. Ensure proper DMX chaining (controller → fixture 1 → fixture 2, etc.) and termination if necessary.
- USB Memory (Optional): If you plan to save or load show data, insert a FAT32 formatted USB memory stick into the USB port.
- Power On: Flip the power switch to the ON position. The console display should illuminate.
5. Operating Instructions
The KK-256 console offers various modes for controlling your lighting. Below are basic operational steps:
5.1. Fixture Selection and Channel Control
- Select Fixture: Use the UNIT buttons (1-16) to select the desired lighting fixture or group of fixtures.
- Adjust Channels: Use the CHANNEL/PLAYBACK faders (1-32) to adjust the DMX values for the selected fixture's channels. The display will show the current channel values.
- Dimmer Control: The console supports dimmer control directly via sliders.
5.2. Scene Programming and Playback
- Create a Scene: Set your desired lighting state using the faders and other controls.
- Save Scene: Refer to the full manual for specific steps on saving scenes to the SCENES FUNCTION buttons. The console supports 80 playbacks.
- Playback Scene: Press the corresponding SCENES FUNCTION button to activate a saved scene.
- Flash Scene: The console supports flash scene functionality for momentary activation.
- Time Control: Scenes can be controlled with HTP (Highest Takes Precedence) and LTP (Latest Takes Precedence) modes.
5.3. Chase and Shape Generation
- Chase Steps: Program up to 100 total chase steps.
- Built-in Shapes: Utilize the 32 built-in shapes for dynamic effects, including Dimmer, Pan/Tilt, RGB, and Color.
- Adjust Speed/Crossfade: Use the SPEED and CROSSFADE wheels to fine-tune the timing of chases and scene transitions.
- X/Y Value Control: Adjust X/Y values (e.g., Pan/Tilt) using the dedicated wheels.
5.4. Real-time Blackout
The console supports real-time blackout functionality to instantly turn off all lights. Refer to the full manual for the specific button or combination to activate this feature.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the console's surface. Avoid abrasive cleaners or solvents.
- Storage: Store the console in a cool, dry place away from direct sunlight and extreme temperatures.
- Ventilation: Ensure proper ventilation around the unit to prevent overheating. Do not block any vents.
- Cable Management: Regularly check DMX and power cables for wear and tear. Replace damaged cables immediately.
- Firmware Updates: Check the manufacturer's website periodically for firmware updates that may enhance performance or add new features. Use the USB port for updates as instructed.
7. Troubleshooting
- No Power:
- Ensure the power cable is securely connected to both the console and the power outlet.
- Check the power switch is in the ON position.
- Verify the power outlet is functional.
- No Light Output:
- Confirm DMX cables are correctly connected and not damaged.
- Check that lighting fixtures are powered on and set to the correct DMX address.
- Ensure the console's DMX output is active and channels are being sent.
- Verify that the selected fixture on the console corresponds to the physical fixture you are trying to control.
- Erratic Behavior:
- Check for proper DMX termination at the end of the DMX chain.
- Ensure DMX cables are not excessively long or running near strong electrical interference.
- Perform a console reset if issues persist (refer to the full manual for reset procedures).
- USB Not Recognized:
- Ensure the USB drive is formatted to FAT32.
- Try a different USB drive.
8. User Tips
- Labeling: Label your DMX cables and fixtures for easier setup and troubleshooting, especially in complex lighting rigs.
- Backup Shows: Regularly back up your programmed shows to a USB memory stick to prevent data loss.
- Practice: Spend time familiarizing yourself with the console's interface and features in a non-live environment to build proficiency.
- DMX Addressing: Double-check the DMX addresses of your fixtures to ensure they match the console's programming.
9. Warranty and Support
The King Kong KK-256 DMX Console comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.