1. Introduction
Thank you for choosing the SAMOLLA All Metal Spinning Fishing Reel. This manual provides essential information for the proper setup, operation, and maintenance of your new fishing reel. Designed for both freshwater and saltwater environments, this reel features a robust all-metal body, high drag capacity, and a smooth retrieve system, making it ideal for catching a variety of fish, including carp and larger species.

2. Setup
2.1 Handle Assembly
The reel features a CNC metal handle that is left/right interchangeable for user comfort. Simply screw the handle into the desired side of the reel body until secure. The direct drive system with bold screws ensures higher strength and stability.

2.2 Spooling Line
When spooling your fishing line, ensure it is wound evenly onto the CNC aluminum spool. The reel's oblique angle design helps reduce frictional resistance between the fishing line and the reel, improving casting distance.

3. Operating Instructions
3.1 Drag System
The reel is equipped with a powerful drag system, offering up to 25KG of maximum drag. The large diameter relief knob puller increases the static fishing force of the friction system by 30%. Adjust the drag knob clockwise to increase tension and counter-clockwise to decrease it, setting it appropriate for your target fish and line strength.

3.2 Reeling and Retrieval
The reel features a double guide rod and slow descent system, ensuring that the line is wound uniformly and lightly onto the spool. This system, combined with the worm shaft mechanism, makes reeling easier, especially when fighting big fish. The 11+1 stainless steel ball bearings provide super smooth operation.

4. Maintenance
Regular maintenance is crucial for the longevity and optimal performance of your SAMOLLA fishing reel. For a printable version of these instructions, please refer to the official user manual PDF available at this link.
4.1 Preparation
Tools: Soft cloth, cotton swabs, bearing oil, gear grease, cleaning agent, screwdriver, tweezers
Environment: Clean, well-lit, dust-free workspace
Prep: Remove fishing line, spool, and clean surface dirt.
4.2 Daily Basic Maintenance (After Each Use)
- Rinse the reel with clean fresh water to remove salt, sand, and dirt.
- Wipe the entire reel dry with a soft cloth.
- Remove the spool and air-dry the rotor and internal parts.
- Check the line roller, handle, and bail for smooth operation.
- Apply 1-2 drops of bearing oil to the line roller if stiff or noisy.
4.3 Full Deep Maintenance (Every 1-3 Months)
Step 1: Disassembly
- Unscrew the spool knob and remove the spool.
- Take off the handle, lock nut, and star drag / drag knob.
- Remove the rotor and side cover screws.
- Take out the gear set, bearings, and washers carefully.
Step 2: Cleaning
- Wipe old grease, dirt, and metal powder with a cloth and cotton swabs.
- Clean bearings with cleaning agent and let dry completely.
- Do not use strong solvents (gasoline, thinner).
Step 3: Lubrication
- Gears & main shaft: Apply proper gear grease.
- Bearings & line roller: Apply 1-2 drops of bearing oil.
- Drag washers: Lightly coat with special drag grease if needed.
- Do NOT overlubricate – excess oil attracts dust.
4.4 Reassembly & Adjustment
- Reinstall all parts in reverse order.
- Tighten screws moderately (do not over-tighten).
- Adjust the drag system to ensure even tension.
- Test rotation, handle, and bail action.
4.5 Important Warnings
- After saltwater use, rinse immediately to prevent rust.
- Do not disassemble parts you are not familiar with.
- Keep bearings away from dust and water during cleaning.
- Replace worn drag washers, bearings, or gears in time.
- Store the reel in a cool, dry place.
4.6 Maintenance Frequency
- Occasional freshwater use: every 2-3 months.
- Frequent fishing: every 1 month.
- Saltwater / beach fishing: clean after every use, full maintenance monthly.
5. Troubleshooting
- Stiff or Noisy Line Roller: Apply 1-2 drops of bearing oil as part of daily maintenance.
- Uneven Drag Tension: Adjust the drag system carefully during reassembly to ensure even tension.
- General Wear and Tear: Regularly inspect and replace worn drag washers, bearings, or gears to maintain optimal performance.
- Rust Formation: Always rinse the reel thoroughly with fresh water immediately after saltwater use.
6. Specifications
| Model | Gear Ratio | Ball Bearings | Max Drag (KG) | Weight (g) | Line Capacity (mm/m) |
|---|---|---|---|---|---|
| QC8000 | 4.8:1 | 11+1BB | 25KG | 624 | 0.35/310, 0.40/240, 0.50/150 |
| QC10000 | 4.8:1 | 11+1BB | 25KG | 617 | 0.35/550, 0.40/420, 0.50/250 |
| QC12000 | 4.8:1 | 11+1BB | 25KG | 614 | 0.35/750, 0.40/600, 0.50/390 |
6.1 Physical Dimensions

6.2 Key Features & Materials
- Body Material: All Metal (Nylon for some components)
- Spool: CNC Aluminum Spool with large line capacity
- Bearings: 11+1 Stainless Steel Ball Bearings, Brass precision bearings, One Way Bearing without clearance, Double Bearing Structure for smooth and stable operation.
- Handle: CNC Metal Handle, Left/Right Inter-changeable
- Drag System: ATD Drag (new-generation drag system), Large Diameter Relief Knob Puller
- Gear: Precision gear combination, Brass Bearing super hard gear disc equipped
- Special Features: Worm Shaft for Big Fish, Double Guide Rod and Slow Descent System, Oblique Angle Design for improved throwing distance, Seawater and Corrosion Resistance.



7. User Tips
- Protect Your Reel: While the reel is robust, consider using a protective case or bag during transport and storage to prevent cosmetic damage, as packaging can sometimes be minimal.
- Spool Size Selection: Ensure you select the correct reel model (QC8000, QC10000, QC12000) based on your desired line capacity and fishing needs. Each model offers different line capacities, as detailed in the specifications table.
- Regular Cleaning: Adhere strictly to the daily and monthly maintenance schedules, especially after saltwater exposure, to prevent corrosion and ensure smooth operation.
8. Warranty and Support
For any questions regarding your SAMOLLA fishing reel, including warranty information or technical support, please contact the SAMOLLA Official Store directly through your purchase platform. Keep your purchase records for any warranty claims.