Introduction
Thank you for choosing the SAMOLLA TZ800 Baitcasting Fishing Reel. This manual provides essential information for the proper setup, operation, and maintenance of your new fishing reel. Designed for durability and performance, the TZ800 features a robust construction suitable for various fishing methods, including saltwater environments. Please read this manual thoroughly before using your reel to ensure optimal performance and longevity.

Figure 1: SAMOLLA TZ800 Baitcasting Fishing Reel Overview
Specifications

Figure 2: SAMOLLA TZ800 Parameter Table and Hand Orientation
| Feature | Specification |
|---|---|
| Model | TZ800 |
| Gear Ratio | 6.3:1 |
| Ball Bearings | 6+1BB |
| Max Drag | 15KG |
| Weight | 236g |
| Line Capacity (mm/m) | 0.23mm/330m, 0.28mm/230m |
| Material | Nylon (body), Stainless Steel (base), Brass (gears) |
| Brake System | New generation micro magnetic brake system with 10 magnetic beans |
| Fishing Method | Bait Casting |
| Position | Ocean Boat Fishing, Ocean Rock Fishing, Ocean Beach Fishing, Lake, River |
| Features | Seawater Proof, Precision Casting, Funnel Shaped Vortex Line Guide, One-Click Slow Down Button, Pressure Release Alarm Sound |

Figure 3: Reel and Spool Dimensions
- Reel Dimensions: Approximately 8cm (3.2in) height, 10cm (3.93in) length.
- Spool Dimensions: Approximately 3.7cm (1.45in) length, 3.8cm (1.5in) diameter, 1.2cm (0.47in) shaft diameter.
Setup
1. Hand Orientation
The SAMOLLA TZ800 reel is available in both left-hand and right-hand retrieve configurations. Ensure you have the correct model for your preference.
2. Spooling the Line
Before use, carefully spool your chosen fishing line onto the reel. Refer to the line capacity specifications (0.23mm/330m, 0.28mm/230m) to avoid overfilling or underfilling the spool.
3. Attaching to a Fishing Rod
Securely attach the baitcasting reel to your fishing rod's reel seat. Ensure it is firmly seated to prevent movement during casting and retrieval.
Operating Instructions
1. Gear Ratio and Performance
The TZ800 features a 6.3:1 gear ratio with high-precision brass gears. This allows for efficient retrieval and is designed to handle high-speed sinking baits, providing stronger operation performance.

Figure 4: 6.3:1 Gear Ratio and Precision Brass Gears
2. Magnetic Brake System (0-24 Pin Infinitely Variable Speed Adjustment)
The reel is equipped with a new generation micro magnetic brake system featuring 10 magnetic beans for accurate control and ultimate casting performance. Adjust the brake system using the 0-24 pin infinitely variable speed adjustment dial:
- 0-8 Pin: Ideal for super long casting with heavy baits.
- 9-16 Pin: Suitable for general purpose fishing.
- 17-24 Pin: Recommended for beginners or when using light baits.

Figure 5: Magnetic Brake System Adjustment
3. Drag System (Star Drag)
The reel features a 15KG Max Drag system, controlled by the Star Drag knob. Adjust the drag by rotating the Star Drag to apply appropriate pressure to the line, preventing line breakage when fighting large fish.

Figure 6: Key Features of the SAMOLLA TZ800
4. One-Click Slow Down Button
For faster and more convenient control of wire laying, utilize the one-click slow down button. This feature assists in managing line release and retrieval.

Figure 7: One-Click Slow Down Button
5. Casting and Line Guide
The reel incorporates a Funnel Shaped Vortex line guide, which greatly reduces line friction, enabling super long casts. Ensure the line passes smoothly through the ceramic outlet hole.

Figure 8: Funnel Shaped Vortex Line Guide for Reduced Friction
6. Pressure Release Alarm Sound
The reel is equipped with a brake sound device that emits a "click" sound when a fish pulls the spool, serving as an alarm to alert the angler.

Figure 9: Pressure Release Alarm Sound
7. Construction Features
The SAMOLLA TZ800 features a stainless steel reinforced metal base, greatly enhancing the strength of the fishing vessel. It is designed to be corrosion-resistant and seawater-resistant, ensuring durability in harsh environments.

Figure 10: Stainless Steel Reinforced Metal Base

Figure 11: Detailed Components and Features
Maintenance
Proper maintenance is crucial for the longevity and optimal performance of your baitcasting reel. Follow these guidelines carefully.
1. Preparation Before Maintenance
- Tools: Phillips screwdriver, flathead screwdriver, tweezers, cotton swabs, soft cloth, bearing oil, gear grease, cleaning alcohol.
- Environment: Choose a clean, windless, well-lit area to avoid losing small parts.
- Safety: Remove the spool and fishing line first to prevent tangling.
2. Basic Daily Maintenance (After Every Use)
- Rinse off sand, mud, and salt with clean water, then wipe the reel dry.
- Open the side cover, remove the spool, and air-dry the spool and bearings.
- Check if the handle, knob, and line guide work smoothly.
- For minor noise, apply 1-2 drops of bearing oil to the spool bearings.
3. Full Disassembly Maintenance (Every 1-3 Months)
- Remove side cover and spool:
- Loosen the side cap → take out spool → clean bearings.
- Remove handle and star drag:
- Unscrew handle screw → remove star drag and brake pads.
- Open main body side cover:
- Remove side screws → open gear compartment.
4. Cleaning
- Use cotton swabs and cleaner to remove old oil, dirt, and metal shavings.
5. Lubrication
- Gears and drive system: Apply a small amount of gear grease.
- Spool bearings and micro-adjust bearings: Apply bearing oil.
- Handle shaft and clutch parts: Apply a thin layer of lubricant.
6. Reassembly
- Reinstall parts in reverse order; do not overtighten screws.
7. Testing
- Install spool → adjust brakes → test rotation; ensure no noise or blockage.
8. Warnings & Important Notes
- Do not use gasoline, thinner, or strong solvents - they damage plastic and seals.
- Avoid over-lubricating, which attracts dust and causes jamming.
- Do not pry or force parts; this may cause deformation.
- After saltwater fishing, rinse immediately to prevent corrosion.
- If bearings make noise or spin poorly, clean and oil them first before replacing.
9. Recommended Maintenance Schedule
- Occasional freshwater fishing: Every 2-3 months.
- Frequent freshwater fishing: Every 1 month.
- Saltwater or rocky areas: Basic maintenance after every use, full maintenance monthly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bearings make noise or spin poorly | Dirt, debris, or lack of lubrication | Clean and oil the bearings. If the problem persists, consider replacement. |
| Reel feels stiff or jammed | Over-lubrication attracting dust, internal corrosion, or debris | Disassemble, clean thoroughly, and re-lubricate sparingly. Rinse after saltwater use. |
| Line tangles frequently (bird's nest) | Improper magnetic brake adjustment, incorrect casting technique, or overfilled spool | Adjust magnetic brake (higher pin setting for beginners). Practice casting. Ensure spool is not overfilled. |
| Drag slips or is inconsistent | Worn drag washers, dirt in drag system, or improper adjustment | Clean drag washers. Ensure Star Drag is properly adjusted. If worn, replace drag washers. |
Warranty and Support
For detailed warranty information and customer support, please refer to the official SAMOLLA documentation or contact your retailer. A comprehensive user manual in PDF format is available for download and can be viewed for additional guidance.
User Manual (PDF): View User Manual PDF