1. Introduction
This manual provides essential information for the safe and efficient use of your Smart JiKong JK BMS Lifepo4 Battery Management System. The JK BMS is designed to manage and protect various battery types, including Li-ion, LiFePO4, and LTO, ensuring optimal performance and longevity. Please read this manual thoroughly before installation and operation.
Video: Overview of the JK BMS unit and included accessories.
2. Key Features
- Built-in Bluetooth (BT): All JK BMS models feature integrated Bluetooth for wireless monitoring and control, eliminating the need for an additional BT interface.
- Active Balance: Ensures optimal cell voltage equalization for improved battery health and performance.
- Automatic Battery Identification: Automatically detects and supports various battery chemistries including Ternary Lithium, Lithium Iron Phosphate (LiFePO4), and Lithium Titanate (LTO) batteries.
- App Control: Manage and set parameters conveniently via a dedicated mobile application (available for Android/iOS).
- Protection Functions: Includes comprehensive Overshoot Protection (stops charging when voltage is too high) and Over-discharge Protection (stops discharging when voltage is too low) to safeguard your battery pack.
- Customizable Interfaces: Supports optional RS485 and CAN communication modules (purchased separately) for advanced integration.
3. Specifications
The following table details the technical specifications for the JK BMS B2A20S20P and B2A24S20P models. Specifications may vary slightly between different models and configurations.
| Technical Item | B2A20S20P | B2A24S20P |
|---|---|---|
| Li-ion (Series) | 8~20 | 8~24 |
| LiFePO4 (Series) | 8~20 | 8~24 |
| LTO (Series) | 14~20 | 14~24 |
| Equalizer Type | Active Equalization/Balance | |
| Balance Current | 2A | |
| Internal Resistance | 0.47mΩ | |
| Continuous Output Current | 200A | |
| Maximum Output Current | 350A | |
| Over Charge Protection Current (Adjustable) | 10~200A | |
| Other Interfaces (Customizable) | RS485/CAN/Display interface | |
| Wiring Output | Common port | |
| Single Cell Voltage | 1-5V | |
| Voltage Acquisition | ±3mV | |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable | |
| Over Charge Release Voltage | 1.2-4.35V Adjustable | |
| Over Current Detect Delay | 2-120s Adjustable | |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable | |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable | |
| Quantity of Temperature Detection | 3 pcs | |
| Temperature Protection | Yes | |
| Short Circuit Protection | Yes | |
| Coulomb Counter | Yes | |
| Bluetooth Function | APP for Android/IOS Available | |
Image: Technical specifications table for JK BMS models.
Note: The discounted version BMS does not support communication, has no built-in buzzer, does not support a display screen; it only has one temperature line and supports BT & app.
4. Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- JK BMS Unit (specific model as ordered, e.g., JK-B2A20S20P or JK-B2A24S20P)
- Balance Cables (75cm)
- NTC Temperature Sensor
- Switch Button
- Installation Tutorial (digital or printed)
Image: Included accessories: Balance Cables, NTC Temperature Sensor, Switch Button, and Installation Tutorial.
5. Setup and Installation
Safety First: Always disconnect the battery pack from any power source before installing or servicing the BMS. Wear appropriate personal protective equipment (PPE).
- Prepare the Battery Pack: Ensure your battery cells are balanced and at a safe voltage level before connecting the BMS.
- Connect Balance Wires: Carefully connect the balance wires from your battery cells to the corresponding ports on the BMS. Ensure correct polarity and sequence (B1, B2, B3... up to B-max). Refer to the included installation tutorial for detailed wiring diagrams specific to your cell configuration.
- Connect Main Power Wires: Connect the main battery negative (B-) and positive (P-) terminals to the designated ports on the BMS. The BMS uses a common port for charge and discharge.
- Connect NTC Temperature Sensor: Plug the NTC temperature sensor into its dedicated port on the BMS. Position the sensor to accurately monitor battery temperature.
- Connect Switch Button: If included, connect the switch button to its port. This button can be used to power on/off the BMS or other functions as configured.
- Optional Modules: If using RS485 or CAN communication modules, connect them to their respective ports. Note that these modules are sold separately.
- Initial Power-Up: After all connections are secure, carefully connect the battery pack to the load/charger. Observe the BMS for any indicator lights or initial behavior.
Image: Two stacked JK BMS units demonstrating typical wiring connections for balance leads and main power.
Important: Incorrect wiring can damage the BMS and battery. If you are unsure, consult a qualified professional.
6. Operation
6.1. Mobile Application
The JK BMS features built-in Bluetooth for seamless connection to its dedicated mobile application. The app allows for real-time monitoring of battery parameters and configuration of protection settings.
- Download the App: Scan the QR code located on your JK BMS unit to download the official application.
- Connect via Bluetooth: Open the app and search for your BMS device. The default connection password is
1234. - Authorization: For advanced settings and parameter changes, the authorization password is
123456. - Monitor Parameters: View real-time data such as individual cell voltages, total pack voltage, current, temperature, and state of charge.
- Configure Settings: Use the app to adjust various parameters, including over-charge/discharge protection voltages, over-current protection, and balance current. The app supports one-key setting for convenience.
Image: JK BMS unit displaying the QR code for downloading the mobile application.
6.2. RS485/CAN Communication (Optional)
For integration with other systems or advanced control, optional RS485 and CAN modules can be purchased and connected. Refer to the specific documentation provided with these modules for their setup and communication protocols.
7. Maintenance
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Cleanliness: Keep the BMS unit clean and free from dust and moisture. Use a dry, soft cloth for cleaning.
- Firmware Updates: Check the mobile application or manufacturer's website for any available firmware updates to ensure optimal performance and access to new features.
- Temperature Monitoring: Ensure the NTC temperature sensor is properly placed and functioning to prevent overheating or overcooling of the battery pack.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| BMS not powering on/no activity | Incorrect wiring, low battery voltage, faulty connection. | Check all wiring connections (B-, P-, balance leads) for correct polarity and secure fit. Verify battery pack voltage is within operating range. |
| Cannot connect to app via Bluetooth | Incorrect password, Bluetooth disabled on phone, BMS not active, app issues. | Ensure Bluetooth is enabled on your device. Use default password 1234. Restart the app and BMS. Check for app updates. |
| Battery not charging/discharging | Over-charge/discharge protection active, over-current protection active, temperature protection active, faulty charger/load. | Check app for active protection alarms. Verify battery voltage and current are within safe limits. Ensure NTC sensor is correctly placed. Test charger/load independently. |
| Cell voltage imbalance | Normal operation (active balancing), significant cell degradation. | The BMS performs active balancing; minor fluctuations are normal. If imbalance is severe or persistent, check individual cell health and balance lead connections. |
9. User Tips
- Specific Model Inquiry: If you are looking for a specific board model like BD6A20S-20P, please ensure to verify the exact model number and specifications before purchase or installation.
- App Password: Remember the default connection password for the app is
1234and the authorization password for settings is123456. - RS485/CAN: Note that while all models support RS485 by default, the module needs to be purchased separately. CAN is not supported by default and requires an optional module.
10. Warranty and Support
For warranty claims, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your purchase records handy as proof of purchase may be required.
The product is certified with CE, indicating compliance with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).