AVACOM ZN02 / ZN07

Contents

LED Motion Sensor Night Light User Manual

Models: ZN02 / ZN07

1. Introduction

Thank you for purchasing the AVACOM LED Motion Sensor Night Light. This device is designed to provide convenient, soft illumination in dark environments, activating automatically when motion is detected. Please read this manual carefully before use and retain it for future reference.

IMPORTANT: For indoor and dry location use only.

2. Product Overview

The AVACOM LED Motion Sensor Night Light features a compact design, a PIR motion sensor, and adjustable light color and modes. It is designed to plug directly into a wall socket without obstructing adjacent outlets.

Two AVACOM LED Motion Sensor Night Lights, one plugged into a wall socket, the other two showing EU and US plug types.
Figure 1: AVACOM LED Motion Sensor Night Light (EU and US plug types shown)
Close-up of the night light showing the 'Change Emitting Color' button, PIR motion sensor, LED light, and EU plug.
Figure 2: Key components of the night light

3. Setup and Installation

To set up your night light:

  1. Unpack the night light from its packaging.
  2. Identify the appropriate plug type (EU or US) for your region.
  3. Plug the LED night light into a wall socket. It can be plugged in upright or downfacing, ensuring it is ventilated and cannot contact bed coverings or other material that may present a fire hazard.
Diagram showing how to plug the night light into a wall socket, either upright (FIG.1) or downfacing (FIG.2).
Figure 3: Plugging the night light into a wall socket

The compact design ensures that the second outlet remains free for other devices.

Dimensions of the night light (2.6 inch length, 2 inch height, 0.8 inch width) and highlighting its compact design that doesn't block other outlets.
Figure 4: Compact design, leaving outlets free

4. Operating Instructions

The night light features a slide switch for mode selection and a button for light color adjustment.

4.1. Switch Settings (3 Modes)

Use the slide switch on the top of the device to select one of the following modes:

  • ON Mode: The night light will turn on constantly and stay lit.
  • OFF Mode: The night light will turn off completely.
  • AUTO Mode (Motion Sensor ON): The night light will automatically turn on when its sensors detect a lack of ambient light and motion. After approximately 30 seconds, it will automatically turn off when motion stops or with an increase in ambient light.
Diagram showing the three lighting modes: OFF (Turn Light Off), AUTO (Motion Sensor Light), ON (Always-ON Lighting).
Figure 5: Night Light Operating Modes
Diagram of the night light showing adjustable light color button, 3 modes (ON/OFF/AUTO) switch, and motion sensor. Also shows examples of ON, OFF, and AUTO modes.
Figure 6: Mode Switch and Sensor Location

4.2. Adjustable Light Color

Press the small button on the top of the device to cycle through different light colors:

  • Warm White (2700-3000K)
  • Mixed Light (4500-5000K)
  • Cold White (6000-6500K)
Diagram showing adjustable light color (Cold White vs. Warm White) by pressing a button.
Figure 7: Adjusting Light Color

4.3. Motion Sensor Functionality

In AUTO mode, the PIR motion sensor detects movement within a 120-degree angle and a range of 3-5 meters (approximately 13 feet). The light will activate only in dark conditions.

Night light in a wall socket, showing motion detection range (120 degrees, 13ft) and auto-off after 30 seconds.
Figure 8: Motion Sensor Range and Auto-off Feature
Diagram illustrating the 120-degree, 3-5m sensing distance of the motion sensor.
Figure 9: Motion Sensor Sensing Distance

4.4. Brightness Adjustment

Long press the light color adjustment button to adjust the brightness from 15% to 100%.

4.5. Demonstration Video

Video 1: Demonstration of light color change and motion sensor functionality.

5. Maintenance and Care

  • Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure the device is unplugged before cleaning.
  • This device uses a non-replaceable LED light source. When the light source reaches the end of its life cycle, the entire device should be replaced.
  • Do not expose the device to dripping or splashing water.
  • Do not install this device near heat sources.
  • Do not disassemble this device.

6. Troubleshooting

  • Light not turning on in AUTO mode: Ensure the environment is sufficiently dark. The night light will not activate in bright places. Test in a very dark environment.
  • Light not detecting motion: Verify the night light is in AUTO mode. Ensure there are no obstructions blocking the motion sensor.
  • Light staying on constantly in AUTO mode: Check for continuous motion within the sensor's range. Ensure there is no constant light source affecting the ambient light sensor.
  • Light flickering or dim: Ensure the night light is securely plugged into the wall socket.

If you encounter any persistent problems, please contact the store for assistance. Our customer service will be happy to help you.

7. Specifications

FeatureSpecification
Model NumberZN02 / ZN07
Input VoltageAC110V-240V (also noted as AC85-265V)
Power0.6W (also noted as 0.8W)
Brightness10~60 Lumens
Light SourceLED bulbs
Color TemperatureWarm White (2700-3000K), Mixed Light (4500-5000K), Cold White (6000-6500K)
Lifespan20000h
Ingress Protection (IP) LevelIP20
Body MaterialABS
Sensor ModeLight Sensor & PIR Motion Sensor
Sensor Angle120 degrees (also noted as 100 degrees)
Sensor Distance3-5 meters (approx. 13 feet)
Delay Time (Auto-off)30 seconds (also noted as 20-30s)
CertificationsCE, FCC, ROHS
Dimensions (approx.)64mm (L) x 44mm (H) x 27mm (W) / 2.6in (L) x 2in (H) x 0.8in (W)
Plug Depth (approx.)36mm
Product parameter diagram with dimensions and a table of specifications.
Figure 10: Product Dimensions and Parameters
Back view of the night light showing 'Model: ZN02, Power: 0.8W, MADE IN CHINA, CE' markings and an EU plug.
Figure 11: Model and Power Information (ZN02)

8. Warranty and Support

This product comes with a 1-year warranty.

For further details or if you have any problems, please refer to the official user manual PDF or contact the store's customer service. They will be happy to assist you.

Official User Manual (PDF): View PDF

9. User Tips

  • Optimal Placement: These night lights are excellent for corridors, staircases, bathrooms, and other dark rooms where you need temporary illumination.
  • Outlet Compatibility: The compact design ensures that the night light does not block a double plug, allowing you to use the adjacent outlet.
  • Customizable Lighting: Experiment with the adjustable brightness and light color (cold white, warm white, mixed light) to find the perfect ambiance for your space.
  • Energy Efficiency: The motion sensor and light sensor ensure the light only activates when needed, saving electricity.
  • Dark Environment Testing: Remember that the motion sensor light will only activate in dark environments. If you are testing it, ensure the area is sufficiently dim.

10. Important Safety Instructions

  • This device is for indoor use only.
  • This device should not be exposed to dripping or splashing water.
  • Do not install this device near heat sources.
  • Do not disassemble this device.
  • Do not place any sources of danger on this device (e.g., liquid-filled objects, lighting candles).
  • CAUTION: Risk of electric shock and fire hazard. This product is not a toy and is not intended for use by children. For adult use only.
  • Do not plug into extension cords.
  • For safe use, plug only into exposed wall outlets where the night light is ventilated and cannot contact bed coverings or other material that may present a fire hazard.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.