Introduction
This manual provides detailed instructions for the Opansten Bluetooth 5.0 Audio Transmitter Receiver (Models BT-B21 and BT-B22). This versatile device allows you to wirelessly transmit and receive audio, supporting high-fidelity codecs like AptX HD and AptX Low Latency for an enhanced audio experience. It features a long operational range, multiple connectivity options, and a built-in rechargeable battery, making it ideal for various home audio setups.
Figure 1: Opansten Bluetooth 5.0 Audio Transmitter Receiver (Model BT-B21/BT-B22)
Package Contents
Please check the box for the following items:
- 1 x Bluetooth Transmitter/Receiver Adapter
- 1 x Micro USB charging cable
- 1 x 3.5mm audio cable
- 1 x 3.5mm jack to 2 RCA plug cables
- 1 x Digital Optical Toslink Audio Cable
- 1 x User Manual
Specifications
| Feature | Specification |
|---|---|
| Bluetooth Chip | CSR8675 |
| Bluetooth Version | V5.0 |
| Bluetooth Profiles (RX) | A2DP, AVRCP |
| Bluetooth Profiles (TX) | A2DP |
| Operational Range | > 80 meters (straight line transmission without occlusion) |
| Battery Capacity | 1000mAh |
| Working Time (RX Mode) | > 20 hours |
| Working Time (TX Mode) | Average > 15 hours |
| Charging Time | About 4.5 hours |
| Input Voltage/Current | DC 5V |
| Input / Output Connections | SPDIF (Optical), 3.5mm Stereo Audio Jack |
| Audio CODEC | aptX HD, aptX Low Latency, aptX, SBC |
| Support Memory Card | No |
| Support Apt-x | Yes |
| Support AAC | Yes |
| Wireless Type | NFC, Bluetooth |
| Sound Track | Double |
| Certifications | CE, FCC, RoHS, pse |
Figure 2: Feature comparison with a standard Bluetooth chip.
Setup
The Opansten Bluetooth Audio Adapter offers three primary modes: Transmitter (TX), Receiver (RX), and Bypass. Select the appropriate mode using the switch on the device.
Device Overview and Connections
Figure 3: Device controls and port layout.
- Power Switch: ON/OFF switch located on the side.
- Mode Switch: Selects between Transmitter (TX), Receiver (RX), and Bypass modes.
- NFC Area: For instant pairing in RX mode with NFC-enabled devices.
- Control Buttons: Quick pairing, Play/Pause, Volume +/Next Track, Volume -/Previous Track.
- Input/Output Ports: Supports SPDIF (Optical) and 3.5mm AUX/RCA for both input and output, depending on the mode.
Charging the Device
Before first use, fully charge the device using the provided Micro USB charging cable and a DC 5V power source. A full charge takes approximately 4.5 hours.
Figure 4: Battery life and charging information.
Operating Modes
The device supports three main operational modes:
1. Receiver (RX) Mode
In RX mode, the device receives wireless audio from your mobile phone, computer, or tablet and outputs it to an existing audio system (e.g., home stereo, speakers) via AUX, Optical, or RCA cables. This mode makes your traditional audio equipment Bluetooth-enabled.
- Set the mode switch to 'RX'.
- Connect the adapter to your audio system (amplifier, mixer, speakers) using the appropriate audio cable (3.5mm AUX, RCA, or Optical).
- Turn on the adapter.
- Enable Bluetooth on your mobile device (smartphone, tablet, PC) and search for the Opansten adapter.
- Select the adapter from the list of available devices to pair.
- Alternatively, for NFC-enabled phones, place your phone near the NFC area on the adapter for instant pairing (ensure NFC is enabled on your phone).
- Once paired, audio from your mobile device will stream to your connected audio system.
Figure 5: Overview of RX, TX, and Bypass modes.
2. Transmitter (TX) Mode
In TX mode, the device transmits audio from non-Bluetooth audio sources (e.g., TV, PC, iPod, CD player) to Bluetooth headphones or speakers.
- Set the mode switch to 'TX'.
- Connect the adapter to your audio source (TV, PC, iPod) using the appropriate audio cable (3.5mm AUX, RCA, or Optical).
- Turn on the adapter.
- Put your Bluetooth headphones or speakers into pairing mode.
- The adapter will automatically search for and connect to nearby Bluetooth audio devices.
- Once connected, audio from your source device will stream wirelessly to your headphones/speakers.
- Dual Stream: The adapter supports simultaneous streaming to two Bluetooth headphones or speakers. To activate, pair the first device, then put the second device into pairing mode and press the quick pairing button on the adapter.
Figure 6: Simultaneous streaming to two headphones in TX mode.
3. Bypass Mode (Wired Connection)
Bypass mode allows you to use the device as a wired pass-through, connecting your audio source directly to your speakers without Bluetooth. This is useful for quickly switching between wired and wireless audio without disconnecting cables.
- Set the mode switch to 'Bypass'.
- Connect your audio source (e.g., TV) to the adapter's input port (AUX or Optical).
- Connect the adapter's output port (AUX or Optical) to your speaker device (e.g., soundbar, amplifier).
- Audio will pass through the adapter directly to your speakers.
- You can easily switch back to TX or RX mode without unplugging cables.
Figure 7: Bypass and Receiver mode setup examples.
Bypass with 4 Different Work Modes
The Bypass mode offers flexible wired connectivity options, indicated by LED lights:
- Aux in/Aux out: Aux LED on.
- Opt in/Opt out: Opt LED on.
- Aux in/Opt out: Aux LED flashes first, then Opt LED on.
- Opt in/Aux out: Opt LED flashes first, then Aux LED on.
Maintenance
- Keep the device dry and away from moisture.
- Do not expose the device to extreme temperatures.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Avoid dropping or subjecting the device to strong impacts.
- Store the device in a cool, dry place when not in use for extended periods.
Troubleshooting
- Difficulty pairing with Sony Bluetooth devices: Sony's Bluetooth headsets/earphones/headphones use a special, non-public encoding method. When pairing with Sony devices in transmitter mode, it may take longer to establish a connection. The pairing time varies by model, but they should eventually pair successfully.
- No audio or poor audio quality:
- Ensure the correct mode (TX/RX) is selected.
- Verify all audio cables are securely connected to the correct input/output ports.
- Check the volume levels on both the adapter and the connected audio devices.
- Ensure the connected Bluetooth device (headphones/speakers) is within the operational range (up to 80m/262ft in open air, 30m/100ft indoors).
- Confirm that both the adapter and the connected device support the same audio codec (e.g., AptX HD, AptX LL) for optimal quality and low latency.
- NFC pairing not working: Ensure your mobile phone has NFC enabled and is placed directly over the NFC area on the adapter. NFC pairing is only supported in RX mode.
- Device not turning on: Ensure the device is fully charged. If the battery is low, connect it to a power source using the Micro USB cable.
User Tips
- For the best low-latency experience, ensure both your Opansten adapter and your connected Bluetooth headphones or speakers support AptX Low Latency.
- When using NFC for quick pairing, always confirm that your mobile device's NFC function is active and the adapter is set to Receiver (RX) mode.
- To maximize the long-range capability, try to minimize physical obstructions between the adapter and your connected Bluetooth device.
- If you frequently switch between wired and wireless audio, utilize the Bypass mode to avoid constantly plugging and unplugging cables.
Warranty and Support
This product is certified with CE, FCC, RoHS, and pse standards, ensuring quality and safety. For any technical support or warranty inquiries, please contact your retailer or the Opansten customer service team. Refer to the product packaging or seller's website for specific contact details.
AliExpress offers certain protections, including free returns within 90 days and fast delivery guarantees. Please consult the AliExpress platform for details on these services.