WHEELTOP EDS OX YQ

WHEELTOP EDS OX YQ Groupset User Manual

MTB Wireless Electronic Transmission System

Model: EDS OX YQ

Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your WHEELTOP EDS OX YQ MTB Wireless Electronic Transmission groupset. Please read this manual thoroughly before use to ensure proper function and longevity of your components.

WHEELTOP EDS OX YQ groupset components: wireless shifter, rear derailleur, and charging cable.

WHEELTOP EDS OX YQ groupset components: wireless shifter, rear derailleur, and charging cable.

Specifications

Feature Description
Material Aluminum Alloy
Speed Range 3-14 speed gear cassette compatible
Rear Derailleur Battery 800mAH (approx. 20,000 shifts per full charge)
Shifter Battery CR2032
Water & Dust Proofing IP67 rated
Derailleur Features Sealed bearings, precise mechanism, clutch for chain noise reduction and drop prevention.
Controller Features Instantaneous gear changes with single push.

Derailleur Cage Compatibility

Table showing specifications for 93mm Long Cage, 75mm Middle Cage, and 58mm Short Cage versions of the derailleur, including speed compatibility, minimum/maximum sprocket, total gear range, and weight.

Detailed specifications for different derailleur cage sizes.

Cage Type Speed Compatibility Minimum Sprocket Maximum Sprocket Total Range of Gear Change Weight
93mm Long Cage 3-14s 10-12T 42-52T 42T 465g
75mm Middle Cage 3-14s 10-12T 28-42T 32T 450g
58mm Short Cage 3-14s 10-12T 25-28T 22T 445g

Setup and Installation

Component Identification

Diagram illustrating the parts of the EDS OX Shifter (Button, LED indicator, Clamp, Bolt, Switch, Battery cover) and Rear Derailleur (Mounting bolt, High limit screw, Low limit screw, LED indicator, Guide roller, Adjustment screw, Magnetic charging port).

Key components of the EDS OX Shifter and Rear Derailleur.

Shifter Parts:

  • A. Button
  • B. LED indicator
  • C. Clamp
  • D. Bolt
  • E. Switch (pairing/mode switching)
  • F. Battery cover

Rear Derailleur Parts:

  • A. Mounting bolt
  • B. High limit screw
  • C. Low limit screw
  • D. LED indicator
  • E. Guide roller
  • F. Adjustment screw
  • G. Magnetic charging port

Battery Installation and Charging

  1. Shifter Battery: Open the battery cover (F) on the shifter and insert a CR2032 battery. Ensure correct polarity.
  2. Rear Derailleur Battery: The rear derailleur uses an 800mAH rechargeable battery. Connect the provided charging cable to the magnetic charging port (G) on the rear derailleur. A full charge provides approximately 20,000 shifts.

APP Pairing

The WHEELTOP EDS OX YQ groupset supports convenient APP pairing for setup and monitoring.

  1. Ensure both the shifter and rear derailleur are powered on.
  2. Activate pairing mode:
    • On the shifter, the blue light will indicate it is entering fine-tuning/pairing mode.
    • On the rear derailleur, continuous blinking indicates it is entering pairing mode.
  3. Open the WHEEL TOP app on your smartphone.
  4. Follow the in-app instructions to "Add device" and complete the pairing process.
Image showing the process of APP pairing for the EDS OX groupset, with the shifter and derailleur entering pairing mode, and screenshots of the WHEEL TOP app interface for device management and riding data.

Demonstration of APP pairing and the WHEEL TOP application interface.

Operating Instructions

Shifting Gears

The EDS OX Controller allows for instantaneous gear changes with just a single push of the button (A). Press the appropriate button to shift up or down through your cassette gears.

Close-up of the EDS OX Shifter showing its indicator light.

The shifter features an indicator light for operational feedback.

Rear Derailleur Functionality

The WheelTop EDS rear derailleur features sealed bearings for clean operation, a precise mechanism for smooth gear changes, and an integrated clutch to reduce chain noise and prevent chain drops, even on challenging terrain.

Text describing the features of the EDS OX Controller (instantaneous gear changes, IP67 waterproof) and EDS OX Derailleur (sealed bearings, precise mechanism, clutch to reduce chain noise).

Description of EDS OX Controller and Derailleur features.

Using the Mobile Application

The WHEEL TOP mobile application allows you to:

  • Manage paired devices.
  • Monitor riding data such as speed, heart rate, total mileage, riding time, and cadence.
  • Potentially fine-tune shifting settings (refer to app for specific features).

Maintenance

Cleaning

Due to the IP67 water and dust proofing, the components can withstand various weather conditions. However, regular cleaning is recommended to maintain optimal performance. Use a damp cloth to wipe down the shifter and derailleur. Avoid high-pressure washing directly onto sensitive areas.

Battery Care

  • Rear Derailleur: Recharge the 800mAH battery as needed. Avoid fully discharging the battery frequently to prolong its lifespan.
  • Shifter: Replace the CR2032 battery when the indicator light shows low power or shifting becomes inconsistent.

General Inspection

Periodically check all bolts and clamps for tightness. Inspect the guide rollers and chain for wear. The derailleur's sealed bearings are designed for durability, but ensure no excessive play develops over time.

Troubleshooting

  • Shifting Issues:
    • Check shifter and derailleur battery levels.
    • Ensure proper pairing between shifter and derailleur via the APP.
    • Verify that the derailleur limit screws (High limit screw B, Low limit screw C) and adjustment screw (F) are correctly set.
    • Inspect the chain and cassette for wear or damage.
  • Connectivity Problems:
    • Ensure both components are powered on.
    • Re-attempt APP pairing if connection is lost.
    • Check for any physical obstructions or interference.
  • Compatibility Concerns:
    • The groupset is designed to support 3-14 speed cassettes. Ensure your cassette falls within this range.
    • Verify your cassette's maximum sprocket size is compatible with your derailleur's cage length (e.g., 93mm cage for up to 52T).
    • While the system is designed for broad compatibility, specific compatibility with other brands like Shimano or SRAM components cannot be guaranteed without direct testing. Consult a professional bike mechanic for mixed-brand setups.
  • Battery Not Charging:
    • Ensure the charging cable is securely connected to the magnetic charging port (G) and a power source.
    • Check the charging cable and power adapter for damage.

User Tips

  • Always check the compatibility of your cassette with the derailleur cage length before installation to ensure optimal performance and prevent damage.
  • Regularly monitor battery levels, especially for the rear derailleur, to avoid unexpected power loss during rides.
  • Utilize the WHEEL TOP mobile application for monitoring riding data and potential fine-tuning, enhancing your overall cycling experience.

Warranty and Support

As an official authorized dealer of WHEELTOP products, we provide the same service guarantee as the official manufacturer. For any support inquiries, technical assistance, or warranty claims, please contact your point of purchase or refer to the official WHEELTOP support channels.

Related Documents - EDS OX YQ

Preview WHEELTOP EDS GeX Electronic Derailleur System User Manual
Comprehensive user manual for the WHEELTOP EDS GeX Electronic Derailleur System, covering installation, setup, calibration, maintenance, and troubleshooting for bicycle enthusiasts.
Preview WHEELTOP EDS OX 2.0 Wireless Electronic Derailleur System User Manual
Comprehensive user manual for the WHEELTOP EDS OX 2.0 Wireless Electronic Derailleur System, covering installation, calibration, adjustments, and maintenance for mountain bikes.
Preview WHEELTOP EDS TX Electronic Derailleur System User Manual
Comprehensive user manual for the WHEELTOP EDS TX Electronic Derailleur System, covering installation, setup, and operation for road bikes. Includes detailed guides on components like the duo-control lever, front derailleur, and rear derailleur, along with charging instructions and system pairing.
Preview WHEELTOP EDS GEX Electronic Derailleur System User Manual
This user manual provides comprehensive instructions for the WHEELTOP EDS GEX Electronic Derailleur System, covering installation, pairing, calibration, adjustment, and maintenance. Learn how to set up and optimize your electronic shifting system for a superior cycling experience.
Preview WHEELTOP EDS TX User Manual: Wireless Electronic Derailleur System Installation & Operation
Comprehensive user manual for the WHEELTOP EDS TX wireless electronic derailleur system. Learn about installation, setup, calibration, and maintenance for your cycling needs.
Preview WHEELTOP EDS Electronic Derailleur Systems: Advanced Bicycle Drivetrain Solutions
Explore the innovative WHEELTOP EDS Electronic Derailleur Systems, featuring advanced wireless shifting technology for road, gravel, and time trial bicycles. Discover high-performance components designed for cyclists seeking precision and efficiency.