Introduction
This manual provides instructions for the safe and efficient use of your YANFU USB Battery Charger. This charger is designed to power various Sony camera and camcorder batteries, specifically those compatible with the NP-FM30 battery type. Please read this manual thoroughly before using the product.
Package Contents
Please check the package for the following items:
- 1 x USB Battery Charger
- 1 x USB Cable (Micro-USB to USB-A)
Specifications
| Feature | Detail |
|---|---|
| Brand Name | YANFU |
| Model Number (Battery Type) | NP-FM30 |
| Use | Camera |
| Input | 5V 1-2A (10W) |
| Output | DC 4.2V / 0.6A (2.5W) |
| Package | Yes |
| Origin | Mainland China |
Note: Specifications are based on the product label.
Compatible Models
This charger is compatible with Sony NP-FM30 type batteries and a wide range of Sony cameras and camcorders. A partial list of compatible models includes:
- Sony CCD-TRV106, CCD-TRV108, CCD-TRV116, CCD-TRV118, CCD-TRV126, CCD-TRV128, CCD-TRV138, CCD-TRV150, CCD-TRV208, CCD-TRV218, CCD-TRV228, CCD-TRV250, CCD-TRV308, CCD-TRV318, CCD-TRV328, CCD-TRV338, CCD-TRV350, CCD-TRV408, CCD-TRV418, CCD-TRV428, CCD-TRV438, CCD-TRV608, CCD-TRV730, CCD-TRV740, CCD-TRV748
- Sony Cyber-shot DSC-F707, DSC-F717, DSC-F828, DSC-R1, DSC-S30, DSC-S50, DSC-S70, DSC-S75, DSC-S85
- Sony DCR-DVD100, DCR-DVD101, DCR-DVD200, DCR-DVD201, DCR-DVD300, DCR-DVD301, DCR-DVD91
- Sony DCR-HC14, DCR-HC15, DCR-HC88
- Sony DCR-PC6, DCR-PC8, DCR-PC9, DCR-PC100, DCR-PC101, DCR-PC103, DCR-PC104, DCR-PC105, DCR-PC110, DCR-PC115, DCR-PC120, DCR-PC330
- Sony DCR-TRV6, DCR-TRV8, DCR-TRV10, DCR-TRV11, DCR-TRV12, DCR-TRV14, DCR-TRV15, DCR-TRV16, DCR-TRV17, DCR-TRV18, DCR-TRV19, DCR-TRV20, DCR-TRV22, DCR-TRV23, DCR-TRV24, DCR-TRV25, DCR-TRV30, DCR-TRV33, DCR-TRV38, DCR-TRV39, DCR-TRV40, DCR-TRV50, DCR-TRV60, DCR-TRV70, DCR-TRV75, DCR-TRV80, DCR-TRV116, DCR-TRV140, DCR-TRV145, DCR-TRV147, DCR-TRV230, DCR-TRV239, DCR-TRV240, DCR-TRV245, DCR-TRV250, DCR-TRV255, DCR-TRV260, DCR-TRV265, DCR-TRV300, DCR-TRV325, DCR-TRV330, DCR-TRV340, DCR-TRV350, DCR-TRV355, DCR-TRV360, DCR-TRV380, DCR-TRV430, DCR-TRV460, DCR-TRV480, DCR-TRV530, DCR-TRV730, DCR-TRV738, DCR-TRV740, DCR-TRV828, DCR-TRV830, DCR-TRV840, DCR-TRV890, DCR-TRV940, DCR-TRV950
- Sony HDR-HC1, HDR-SR1, HDR-UX1
- Sony MVC-CD200, MVC-CD250, MVC-CD300, MVC-CD350, MVC-CD400, MVC-CD500
- Sony DSR-PDX10, HVL-ML20M, HVR-A1, DSLR-A100, Video Walkman GV-D1000
Note: This list is not exhaustive. Please verify your device uses an NP-FM30 type battery before purchase.
Setup Instructions
Follow these steps to set up your USB battery charger:
- Identify Battery Type: Ensure your camera or camcorder battery is compatible with the NP-FM30 standard. The charger is designed with specific contacts for this battery type.
The YANFU USB Battery Charger, showing the battery slot, charging contacts, LED indicator, and micro-USB input port. - Connect USB Cable: Take the provided USB cable. Insert the micro-USB end into the charging port on the side of the charger.
Detail of the micro-USB input port on the charger. - Connect to Power Source: Plug the standard USB-A end of the cable into a suitable USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank). The power source should provide 5V DC at 1-2A for optimal charging.
- Insert Battery: Carefully insert your NP-FM30 compatible battery into the charger, ensuring the battery contacts align with the charger's pins. The battery should fit snugly.
Operating Instructions
Once the charger is set up and a battery is inserted:
- Charging Indicator: The charger features an LED indicator light.
- When the battery is charging, the LED indicator will typically be red.
- When the battery is fully charged, the LED indicator will typically turn green.
- Charging Time: Charging time will vary depending on the battery's capacity and its current charge level.
- Remove Battery: Once the LED indicator turns green, the battery is fully charged. Carefully remove the battery from the charger.
- Disconnect Power: Disconnect the USB cable from the power source and the charger when not in use.
Maintenance
- Keep the charger clean and dry. Use a soft, dry cloth to wipe any dust or debris.
- Avoid exposing the charger to extreme temperatures, humidity, or direct sunlight.
- Do not attempt to disassemble or modify the charger. This will void the warranty and may cause damage or injury.
- Store the charger in a safe place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger LED does not light up. | No power supply; faulty USB cable; incorrect battery insertion. | Check USB connection and power source. Try a different USB cable. Re-insert battery, ensuring proper alignment. |
| Battery not charging (LED stays red for too long or doesn't change). | Battery is already full; battery is faulty; charger is faulty; power source is insufficient. | Check battery level in camera. Try charging a different battery. Ensure power source provides 5V 1-2A. Contact support if issues persist. |
| Charger or battery gets excessively hot. | Faulty battery; charger malfunction; improper ventilation. | Immediately disconnect power. Do not use the charger or battery if overheating occurs. Ensure charger is in a well-ventilated area. Contact support. |
Warranty and Support
Your YANFU USB Battery Charger is designed for reliability. For any issues or support, please refer to the following:
- Free Returns: Enjoy free returns within 90 days of purchase if you are not satisfied with your order.
- Fast Delivery Guarantee: If delivery is delayed, you may be eligible for a coupon code. Refunds are also available if the package is lost or items are damaged during transit, or if no delivery occurs within 60 days.
- Security & Privacy: Your personal details are kept safe and secure and are not shared with third parties without your consent.
- For further assistance, please contact the seller or refer to the platform's customer service.
Important Safety Warnings
- Do not expose the charger to fire or moisture.
- To reduce the risk of electronic shock, do not remove the cover (back plate).
- No user-serviceable parts inside. Refer servicing to qualified personnel.
- This charger is for indoor use only.
- Keep out of reach of children.