Sunnigoo X7/X7PRO Electric Scooter Instruction Manual

1. Introduction

Before using the product, please read this manual carefully. The illustrations and functional descriptions provided are for reference only. The technical performance indicators mentioned are based on specific experimental environments, and actual indicators may vary depending on settings and environments. This product is intended for personal transportation with auxiliary safety management and should not be used for any illegal purpose. Some services are provided and supported by third parties, which may change over time. The manufacturer does not provide any guarantee for third-party services. Please carefully read the terms regarding third-party services and privacy policies before using this product.

⚠️ Disclaimer: Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

IMPORTANT! Read carefully and keep for future reference.

2. Product Overview

2.1 Product & Accessories

The Sunnigoo X7/X7PRO Electric Scooter comes with the following accessories:

No.	Name	Picture
1	Power Adapter
2	Tool Bags
3	Instruction Manual

2.2 Introduction to Functions

The following diagram illustrates the main components and functions of the scooter:

• Handle: For steering and control.
• Accelerator: Controls speed.
• Front Brake: Activates front wheel braking.
• Rear Brake: Activates rear wheel braking.
• Flashlight Button: Turns headlights on/off.
• Turn Light Button: Activates turn signals.
• Horn Button: Sounds the horn.
• Speed Limit Button: Adjusts speed modes.
• Dingle/Dual Motor Switch Button: Toggles between single and dual motor drive.
• Pole: Main vertical support structure.
• Folding Part: Mechanism for folding the scooter.
• Flashlight: Front illumination.
• Front Dust-Board: Front fender.
• Charging Port: Where the power adapter connects.
• Rear Shocks: Rear suspension for a smoother ride.
• Rear Dust-Board: Rear fender.
• Rear Disk Brake: Rear wheel braking system.
• Brushless Motor: Provides power to the wheels.
• LED Lightstrip: Decorative and safety lighting.
• 11 inch Tire: Off-road tires for various terrains.

*The accessories and any additional items which are not approved by the manufacturer shall not be used.

3. Safety Instructions

Your safety is paramount. Please adhere to the following guidelines:

• This electric scooter is designed for use by one adult only. Never carry additional passengers.
• Always wear a safety helmet and other protective equipment (e.g., knee pads, elbow pads) while using this product.
• Practice riding in an open, safe area (not on public lanes) until you are skilled in operation.
• Never ride this product in unsafe or illegal places.
• Always keep both hands on the handlebars and both feet on the scooter while riding. Do not attempt dangerous actions or ride with one hand.
• Anticipate and adapt your trajectory and speed to avoid obstacles and pedestrians. Do not attempt to directly pass steps higher than 3 cm.
• For your safety, control your speed to less than 25 km/h. When riding at night, turn on the headlight and limit your speed to 15 km/h or less.
• Do not use this product in ambient temperatures below -5 °C.
• In the event of bumps or poor road conditions, ride slowly or get off the scooter and push it forward.
• Do not use this product on oily or icy surfaces.
• To avoid damage to electrical parts, do not immerse the scooter in water deeper than 4 cm.
• Avoid using this product in bad weather conditions such as heavy rain, snow, or strong winds to prevent damage.
• Use this product within the allowable load range (maximum 150 kg).
• Avoid storing or using the product in high or extremely low temperatures, or near flammable materials.
• The scooter is a special riding product; ride it on smooth roads without pits.
• Do not attach any load to the handlebar, as this will affect the stability of the vehicle.
• Engage the kickstand when the vehicle is not in use. Flip up the kickstand before riding. Do not park the vehicle on a slope.
• The minimum user height is 1.4m, and the maximum is 2.2m. The minimum age is 13 years old, and the maximum age is 70 years old.
• Braking performance and tire friction decrease in wet conditions. Slow down and brake earlier when it is raining.
• Keep plastic covering away from children to avoid suffocation.
• The brake may become hot during use; do not touch it immediately after riding.
• Do not modify or transform the vehicle, including the steering tube, sleeve, stem, folding mechanism, and rear brake.
• Always wear appropriate footwear when riding.
• Always anticipate your trajectory and speed while respecting local traffic laws and regulations.

4. Scooter Assembly

4.1 Unfolding the X7/X7PRO

To unfold the scooter, pull up the folding handle until the stem is straight and securely locked into place.

4.2 Lights Installation

Ensure that the handlebar and lights are fixed securely before riding. Check all connections and ensure they are tight.

4.3 Secure All Screws

Before riding, ensure all screws on the electric scooter are properly tightened to prevent any components from loosening during operation.

5. Charging

Follow these steps to charge your Sunnigoo X7/X7PRO Electric Scooter:

1. Remove the rubber protective cover from the charging port.
2. Insert the charger connector into the charging port on the scooter body.
3. Insert the power plug of the charger into a power socket.
4. The charger indicator light will be red while charging. When the battery is fully charged, the indicator light will turn green.
5. It is recommended to power off the vehicle during charging or place it in a non-operational mode.

6. Operation

6.1 X7 PRO Dashboard Overview

The dashboard provides essential information and controls:

• NFC Instrument: For NFC card interaction.
• Accelerator: Controls acceleration.
• Headlight Switch: Toggles headlights.
• Acceleration Mode: Selects acceleration profile.
• Instrument Switch: For display settings.
• Deceleration Mode: Selects deceleration profile.
• Horn: Activates the horn.
• Ambient Light Button: Controls ambient lighting.
• Single Dual Drive Switch Button: Toggles between single and dual motor drive.

6.2 Basic Operations

1. Wake Up Screen: Press and hold any key for 3 seconds. The dashboard will display the lock symbol, password, or NFC symbol.
2. Unlock (NFC): Swipe your NFC card. A prompt sound indicates successful unlock, and the scooter will turn on.
3. Unlock (Password): The first 3 digits of the mileage are the password area. Use the "+" and "-" keys to add or subtract digits. Short press the "Power button" to confirm each digit and move to the next. After entering the third digit, press "Power Button" to confirm the key. A "Beep" indicates success; if it fails, it will "Beep" as Fails, and the password will be cleared.
4. Power Off/Lock: After entering riding mode, press and hold the power button for 3 seconds to turn off. You can also lock it by swiping your NFC card. The scooter will automatically shut down after several minutes of inactivity (shutdown time can be set). If inactive for 15 days, it enters deep sleep. To turn it on from deep sleep, you must press and hold the button to enter the password; NFC card swiping will not work.
5. Shift Speed: Short press the "+" and "-" keys to shift speed (speed shifts in a cycle). The default is 1st gear. Press the "+" button for more than 3 seconds to switch to riding mode. Press and hold the "-" key for more than 4 seconds to switch the speed display (default is maximum speed).
6. Headlights: Short press the "Headlight" button to turn headlights on and off.
7. Horn: Press the horn button to sound the horn; release to stop.
8. Menu Access (P00-P20): Press the "M" key for 5 seconds to enter the menu. In the project state, short press "M" to increase the menu number (P00-P20). Long press "M" to save and exit to normal driving status. The system will return to riding mode after 10 seconds without any button press.

7. Riding Instructions

7.1 Preparation for Riding

1. Select an appropriate and safe riding place.
2. Unfold the scooter according to the assembly instructions and ensure all connection elements (such as the folding system) are correctly tightened and not broken.
3. Wear appropriate protective equipment, including a helmet.
4. Check that the steering system is correctly adjusted, and that the brakes and wheels are in good condition.

7.2 Braking

• Under normal circumstances, holding the left brake lever will immediately power off the motor and engage braking. The greater the holding force, the greater the braking force.
• In emergency situations, you can step on the rear brake to simultaneously enable the electromagnetic brake of the front wheel and the friction brake of the rear wheel.

8. Maintenance

8.1 Lubrication

Add a small amount of white grease or lubricant to the folded part once every six months. Check the scooter once every three months for screw loosening and tighten any loose screws.

8.2 Battery Care

Upon receiving your electric scooter, fully charge the battery before its first use. The battery can be charged at any time to maintain power supply without damage. When not in use, the battery should be charged once every three months.

8.3 Storage and Daily Maintenance

Avoid leaving the scooter under direct sunlight or in severely humid places for extended periods. Keep the scooter clean.

Regularly check the tightening of all bolted elements, especially the wheel axles, the folding system, the steering system, and the brake shaft.

8.4 Cleaning Recommendations

• If you find stains on the scooter's body, wipe them off with a damp cloth. For stubborn stains, apply some toothpaste and scrub with a toothbrush, then wipe with a damp cloth.
• Do not clean the scooter with alcohol, gasoline, kerosene, or other corrosive chemical solvents, as these can cause severe damage.
• Do not wash the scooter with a high-pressure water spray.
• During cleaning, ensure the scooter is turned off, the charging cable is unplugged, and the rubber flap is closed to prevent water leakage, which could lead to electric shock or other major problems.

8.5 Routine Inspection

1. Before riding, confirm that the folding mechanism is locked.
2. Check whether the tires are badly worn. Contact an authorized dealer for replacement if needed.
3. Check the tire pressure. If it's too low, inflate the tires immediately to the standard value.
4. Check the wear condition of the brake pads. If wear affects the brake system, contact an authorized dealer.
5. The screws used in this product are self-tightened. Note that the effect may diminish after several tightening cycles.

9. Troubleshooting & FAQ

• Q: My turn signal broke off, where can I buy a replacement?
  A: Please contact customer support or an authorized dealer for spare parts and replacement options.
• Q: How do I unlock the scooter?
  A: Refer to section 6.2 Basic Operations for instructions on unlocking using an NFC card or a password.
• Q: The lights only turn blue. How can I change their color?
  A: The scooter features colorful LED ambient lights. If you are unable to change the color through the dashboard controls, please refer to the P00-P20 menu settings (Section 6.2, point 8) or contact customer support for advanced customization options.
• Q: I need parameter P00/P20 settings.
  A: You can access the menu by pressing the "M" key for 5 seconds. Navigate through parameters P00-P20 using short presses of "M". Refer to Section 6.2, point 8 for details.
• Q: What is the difference between the X7 and X7PRO models?
  A: This manual covers both X7 and X7PRO models. While core features are similar, specific differences in performance or features may exist. Please refer to the specifications table for detailed parameters or contact customer support for model-specific inquiries.

10. Specifications

The following table outlines the key parameters of the Sunnigoo X7/X7PRO Electric Scooter:

11. User Tips

• Start Slowly: This scooter is very powerful. Always start at a low speed and gradually increase as you become comfortable with its performance.
• Range Variation: The stated range of 45-60km (31-37 miles) is an estimate. Actual mileage can vary significantly based on factors like terrain, rider weight, speed, riding style, and environmental conditions.
• Local Regulations: Be aware of and comply with local laws regarding electric scooter speed limits and usage. The scooter may have a speed limit function (bridling) to comply with regulations.

12. Warranty and Support

12.1 Warranty Information

The product comes with a warranty from the date of purchase. If a fault or damage is caused by quality defects under normal circumstances within the warranty period, the product will be repaired, replaced, or returned free of charge, depending on the specific situation.

Important Notes:

• Consumables such as inner/outer tires, headlight assembly, handlebar cover, fenders, taillights, decorative covers, kickstand, charger port holder, rubber protective covers, and the accompanying tool kit are not covered under warranty.
• As with any mechanical component, vehicles are subject to high stresses and wear. Components may react differently to wear or fatigue. If a component's expected service life is exceeded, it may break suddenly, risking injury. Cracks, scratches, and discoloration in high-stress areas indicate the component has exceeded its service life and should be replaced.
• Modifications not noted in the manufacturer's instructions are not recommended.
• The warranty period is calculated from the date of first purchase, with the invoice date prevailing. If no valid invoice is available, the warranty period starts 30 days after the delivery date.
• The warranty does not cover faults or damages caused by misuse, abuse, inappropriate transportation, maintenance, storage, force majeure, unauthorized repair/dismantling, use of third-party products/services, use for non-specified/unintended purposes, violation of instructions, commercial use, or use after accumulated mileage exceeds 2,000 km.
• Normal wear and tear, scratching, abrasion, or problems caused by paints, solvents, and other chemicals are excluded.
• Altering or destroying the original product label invalidates the warranty.
• The completeness and intactness of the product and its accessories are not covered by the warranty upon receipt.

12.2 Contact Information

For support, warranty claims, or inquiries, please use the following contact methods:

• Web: www.sunnigoo.com
• Email: Service@hzneighbor.com

You can also scan the QR code below to access the official website: