DayPlus 21V Cordless Combi Drill Set

Contents

DayPlus 21V Cordless Power Drill Instruction Manual

Model: 21V Cordless Combi Drill Set

1. Product Overview

The DayPlus 21V Cordless Power Drill is a versatile and powerful tool designed for a wide range of drilling and screwdriving tasks. It features a robust all-metal gear construction, a 25+1 torque setting for precise control, and a two-speed gearbox for optimal performance across different materials. The integrated LED worklight ensures visibility in dark areas, and its ergonomic design provides comfortable handling.

Diagram showing the components of the DayPlus 21V Cordless Power Drill, including the high quality chuck, 25 torque adjustment, 2nd gear adjustment, heat dissipation hole, LED lights, start button, forward and reverse buttons, anti-slip handle, lithium battery, and battery removal button.
Figure 1: Product Components and Features
Diagram showing the product parameters of the DayPlus 21V Cordless Power Drill, labeling the heat dissipation vent, scattered lighting, stepless speed regulation button, forward and reverse switch, soft rubber coated handle, battery removal button, and large capacity battery.
Figure 2: Product Parameters and Labeled Parts

2. Safety Instructions

Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.

  • Wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves.
  • Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Ensure the power switch is in the off-position before connecting to power source, picking up or carrying the tool.
  • Do not force the power tool. Use the correct power tool for your application.
  • Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
  • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
  • Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
  • Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.

3. Package Contents

Your DayPlus 21V Cordless Power Drill kit includes the following items:

  • 1x Electric Drill
  • 1x Charger
  • 1x 1.5Ah Lithium-Ion Battery
  • 1x Carrying Case
  • 1x Flexible Shaft
  • 1x Extension Rod
  • 1x Double-headed bits
  • 1x Masonry drill bit
  • 1x Instruction manual
  • 9x Sockets (4mm, 4.5mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm)
  • 10x Screwdriver Bits
  • 3x HSS Twist drill bits
Image showing the DayPlus 21V Cordless Power Drill along with its accessories, including a battery, charger, various drill bits, screwdriver bits, sockets, flexible shaft, and a carrying case.
Figure 3: Included Components and Accessories

4. Setup

4.1. Battery Charging

  1. Ensure the battery is securely detached from the drill.
  2. Connect the charger to a standard power outlet.
  3. Plug the charger cable into the charging port on the 1.5Ah Lithium-Ion Battery.
  4. Allow 1.5 to 3 hours for a full charge. The charging indicator on the battery or charger will typically show when charging is complete.
Video 1: Product demonstration, including battery attachment and charging.

4.2. Battery Installation and Removal

  1. **Installation:** Align the battery pack with the base of the drill handle. Slide the battery into place until it clicks securely.
  2. **Removal:** Press the battery release button (typically red) located at the front of the battery pack and slide the battery out.

4.3. Drill Bit/Accessory Installation

  1. **Open Chuck:** Rotate the chuck counter-clockwise to open the jaws.
  2. **Insert Bit:** Insert the desired drill bit or screwdriver bit into the chuck, ensuring it is seated firmly.
  3. **Tighten Chuck:** Rotate the chuck clockwise to tighten the jaws around the bit. Hand-tighten firmly.
Three-step diagram showing how to install a drill bit: 1. Rotate the collet counter-clockwise. 2. Insert the drill bit. 3. Rotate and tighten the collet clockwise.
Figure 4: Drill Bit Installation Steps

5. Operating Instructions

5.1. Power On/Off and Speed Control

  • The drill is activated by pressing the trigger switch.
  • The variable speed pressure trigger allows for stepless speed change: press hard to rotate fast, gently press for slow speed, and release to automatically stop.
  • Use the 2-gear speed selector switch (located on top of the drill) to choose between:
    • First Gear (0-400 RPM): Ideal for tightening screws and tasks requiring higher torque and lower speed.
    • Second Gear (0-1400 RPM): Suitable for drilling holes and tasks requiring higher speed and lower torque.
Diagram illustrating the 2-speed regulation of the drill: 1st gear for tightening screws and 2nd gear for drilling holes.
Figure 5: 2-Speed Regulation for Different Tasks
Diagram explaining stepless speed change: 1. Press hard and rotate fast. 2. Slow speed by gently pressing. 3. Let go will automatically stop.
Figure 6: Stepless Speed Change Operation

5.2. Torque Adjustment

The drill features a 25+1 torque selector slip control ring. Rotate the ring to select the appropriate torque setting for your task. Higher numbers provide more torque, preventing over-tightening or stripping of screws and over-drilling into materials.

Diagram showing the 25 torque settings on the drill, with examples of materials like PVC, Wood, Brick, and Ceramic tile, indicating different torque levels for each.
Figure 7: Torque Settings for Various Materials

5.3. Forward/Reverse Rotation

Use the forward and reverse levers (buttons) located above the trigger to change the rotation direction. Press the left side to tighten screws (forward rotation) and the right side to loosen screws (reverse rotation). The middle position locks the trigger, preventing accidental starts.

Diagram showing the forward and reverse switch operation: Pressing the right side loosens, pressing the left side tightens, and the middle position locks the machine.
Figure 8: Forward and Reverse Switch Operation
Diagram showing the forward and reverse buttons on the drill. The reverse button is for removing screws, and the forward button is for screwing.
Figure 9: Forward and Reverse Switch for Screwing and Removing

5.4. LED Worklight

The built-in LED light automatically illuminates when the trigger is pressed, providing visibility in dark or confined work areas.

Image showing the drill's LED worklight illuminating a dark work area, allowing for normal operation even in low light conditions.
Figure 10: LED Worklight in Action

5.5. Using the Flexible Shaft

The included flexible shaft can be used with screwdriver bits to reach screws in awkward or hard-to-access locations where the main drill body cannot fit.

5.6. Applications

The DayPlus 21V Cordless Power Drill is suitable for:

  • Drilling into wood (up to 23mm)
  • Drilling into metal (up to 10mm)
  • Drilling into ceramic tile and brick
  • Tightening and loosening various types of screws
Collage of images demonstrating the multipurpose use of the lithium electric drill for various tasks like drilling into wood, metal, and tightening screws in different scenarios.
Figure 11: Multipurpose Applications of the Drill
A person using the cordless drill to drill into a wooden surface.
Figure 12: Drilling into Wood
A person using the cordless drill to screw into a ceiling fixture.
Figure 13: Screwing into a Ceiling
A person using the cordless drill to screw into a metal sheet.
Figure 14: Screwing into Metal
A person using the cordless drill to drill into a wall.
Figure 15: Drilling into a Wall

6. Maintenance

6.1. Cleaning

  • Regularly clean the ventilation slots to prevent overheating.
  • Use a soft, damp cloth to wipe down the tool. Do not use harsh chemicals or abrasive cleaners.
  • Keep the chuck jaws free of debris for optimal grip.

6.2. Storage

  • Store the drill and accessories in the provided carrying case in a dry, secure place, away from direct sunlight and extreme temperatures.
  • Ensure the battery is removed from the drill before storage.

6.3. Battery Care

  • Do not store batteries in a discharged state. Recharge them regularly, even if not in use.
  • Avoid exposing batteries to water or extreme heat.
  • The battery features current protection for enhanced safety and longevity.
Diagram illustrating the air outlet design for effective heat dissipation, preventing the machine from burning during continuous work.
Figure 16: Air Outlet Design for Heat Dissipation
Diagram highlighting the features of the 21V high-quality lithium battery: long-lasting battery life, high quality, energy saving, and current protection.
Figure 17: 21V Lithium Battery Features

7. Troubleshooting

  • **Drill not starting:** Ensure the battery is fully charged and properly installed. Check that the forward/reverse switch is not in the locked (middle) position.
  • **Reduced power or short running time:** The battery may need recharging or could be nearing the end of its lifespan.
  • **Excessive heat during operation:** Ensure the ventilation slots are clear. Avoid continuous heavy-duty use without breaks.
  • **Bit slipping in chuck:** Ensure the chuck is tightened securely around the bit. The bit may be worn or incompatible.

8. Specifications

FeatureSpecification
TypeCordless drill kit
Voltage21V
ColorBlue
MaterialPlastic shell, rubber handle, tungsten steel rotation shaft, aluminum head
Speed Gears2
First Gear Speed0-400 RPM
Second Gear Speed0-1400 RPM
Max Drilling Capacity (Metal)10mm
Max Drilling Capacity (Wood)23mm
Max Torque45N.m
Torque Settings25+1
Keyless Chuck Range0.8 - 10mm
Net Weight1.6kgs / 3.5lbs
Product Size (L*W*H)19x7.1x20cm / 7.48'' x 2.8'' x 7.87''
Lithium Battery Capacity1500mAh
Running Time30-45 minutes
Charging Time1.5-3 hours
Diagram showing the dimensions of the DayPlus 21V Cordless Power Drill: 20cm (7.9 inches) in length, 21.5cm (8.5 inches) in height, and 7.5cm (3 inches) in width at the base.
Figure 18: Product Dimensions

9. User Tips

  • **Battery Count:** The standard package includes one 1.5Ah Lithium-Ion Battery. If you require a spare, it must be purchased separately.
  • **Carrying Case:** The drill set comes with a sturdy carrying case to keep all components organized and protected.
  • **Charger Compatibility:** The included charger is designed for standard outlets in your region (e.g., US type plugs for US customers).
  • **Bit Selection:** Always choose the correct drill bit or screwdriver bit for the material and task to ensure efficiency and prevent damage to the bit or workpiece.
  • **Torque Settings:** Experiment with different torque settings on scrap material before working on your final project to find the optimal setting for your specific task and material.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.