1. Introduction
Thank you for choosing the Ferrex T12 Cordless Soldering Iron Welding Station. This portable and efficient tool is designed for a wide range of soldering applications, offering quick heating, precise temperature control, and robust safety features. It is specifically designed to be powered by Ferrex 20V Lithium-ion batteries, providing cordless convenience for on-the-go repairs and projects.
Package Contents:
- Soldering Station Unit
- Soldering Iron Handle
- Soldering Iron Stand
- Soldering Tip
- User Manual (this document)
Note: The Ferrex 20V Lithium-ion Battery is not included and must be purchased separately.
2. Safety Information
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. This soldering station incorporates several safety features to ensure safe operation.
Figure 1: T12 OLED Soldering Station with highlighted safety features.
Key Safety Protections:
- Short-circuit Protection: Prevents damage from electrical shorts.
- Over-load Protection: Safeguards against excessive current draw.
- Over-current Protection: Protects components from high current.
- Over-voltage Protection: Shields against voltage spikes.
- Over-heat Protection: Prevents the unit from overheating.
- Under-voltage Protection: Includes a Low Voltage Cut Off feature to protect your battery from over-discharge.
The unit is also designed for good heat dissipation to maintain optimal operating temperatures.
3. Specifications
| Feature | Specification |
|---|---|
| Compatible Battery | FOR Ferrex 20V Lithium-ion Battery |
| Temperature Control Range (Celsius) | 200 ℃ - 480 ℃ |
| Temperature Control Range (Fahrenheit) | 392 °F - 896 °F |
| Input Voltage | 14.4V - 21V |
| Heat-up Time (0-350°C) | Approximately 8 seconds |
| Maximum Temperature | 550 °C |
| Auto Sleep Time | 2 minutes (Adjustable via menu) |
| DIY Supplies | Electrical |
| Origin | Mainland China |
4. Setup
The Ferrex T12 Soldering Station is designed for quick and easy setup, allowing you to start soldering in seconds.
Figure 2: Assembled T12 OLED Soldering Station.
- Insert Battery: Ensure your Ferrex 20V Lithium-ion battery is fully charged. Slide the battery into the base of the soldering station until it clicks securely into place.
- Connect Soldering Iron: Connect the cable from the soldering iron handle to the designated port on the soldering station unit.
- Place in Stand: Position the soldering iron in its stand when not in use to prevent accidental burns and protect the tip.
- Power On: Locate the power switch on the side of the battery adapter base and switch it to the 'ON' position.
Figure 3: Battery adapter base with connection pins.
Figure 4: Power switch on the soldering station base.
5. Operating Instructions
The T12 Soldering Station features an OLED display and intuitive controls for precise operation.
Video 1: Demonstration of the T12 Soldering Station's features and operation.
Figure 5: 1.3-inch Real-Time OLED Display indicators.
- Power On: Flip the power switch on the battery adapter base to the 'ON' position. The OLED screen will illuminate.
- Temperature Adjustment: Use the front dial on the soldering station to adjust the desired temperature. The OLED display will show the 'Real-Time Set Temperature' (1) and 'Real-Time Working Temperature' (5).
- Quick Heating: The station heats up rapidly, reaching 0-350°C in approximately 8 seconds.
- OLED Display Information: The 1.3-inch OLED screen provides real-time feedback on various parameters:
- 1. Real-Time Set Temperature: Your target temperature.
- 2. Vibration Prompt: Indicates certain events or modes.
- 3. STC Usage: Status of the temperature control system.
- 4. Real-Time Voltage: Current battery voltage.
- 5. Real-Time Working Temperature: Actual temperature of the soldering tip.
- 6. Internal Temperature of the Machine: Internal temperature of the station.
- Auto Sleep Function: The unit features an adjustable auto-sleep mode (default 2 minutes). When the soldering iron is idle for the set duration, it will enter sleep mode to conserve energy and prolong tip life.
- Vibration Wake Up: Gently move the soldering iron to wake it up from auto-sleep mode.
- Auto Shut Off: An adjustable auto shut-off feature is available via the menu, turning off the unit after a prolonged period of inactivity.
- Temperature Boost Function: This feature allows for a temporary increase in temperature for demanding soldering tasks. It is adjustable via the menu.
- Low Voltage Cut Off: The system automatically cuts off power if the battery voltage drops too low, protecting the battery from over-discharge.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your soldering station.
- Soldering Tip Care: Regularly clean the soldering tip with a damp sponge or brass wool to remove excess solder and oxidation. Re-tin the tip with fresh solder after cleaning and before storage.
- Unit Cleaning: Keep the main unit and battery adapter free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Heat Dissipation: Ensure the ventilation areas of the soldering station are not obstructed to allow for proper heat dissipation.
- Storage: Store the soldering station in a dry, cool place away from direct sunlight and moisture. Remove the battery if storing for extended periods.
7. Troubleshooting
If you encounter issues with your Ferrex T12 Soldering Station, refer to the following common troubleshooting steps:
- Unit does not power on:
- Ensure the Ferrex 20V Lithium-ion battery is fully charged and securely inserted.
- Check that the power switch on the base is in the 'ON' position.
- Soldering iron is not heating up or temperature is unstable:
- Verify that the soldering iron handle is properly connected to the station.
- Check the soldering tip for proper seating and ensure it is not damaged.
- Confirm the set temperature on the OLED display.
- Unit shuts off unexpectedly:
- The battery may be low. Recharge the Ferrex 20V Lithium-ion battery. The 'Low Voltage Cut Off' feature protects the battery from over-discharge.
- Check for any error messages on the OLED display.
- OLED display is blank or flickering:
- Ensure the battery is charged and properly connected.
- Power cycle the unit (turn off, then on again).
If problems persist after attempting these steps, please contact customer support.
8. Warranty and Support
This product is covered by a standard manufacturer's warranty. For specific warranty details, please refer to the purchase documentation or contact your retailer. For technical support, replacement parts, or further assistance, please contact the seller or manufacturer directly.
