XIANGCLEAR Intelligent LED Driver User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your XIANGCLEAR Intelligent LED Driver. This device is designed to power various LED lighting applications, offering both 2.4G remote control and APP control capabilities for enhanced flexibility in managing your lighting environment, including dual-color flexible strips and chandeliers.

2. Safety Information and Precautions

• Do Not Disassemble: Unauthorized disassembly is strictly prohibited to prevent electric shock and voiding the warranty.
• Keep Away from Water: Avoid using the device in damp or wet environments to prevent electrical hazards.
• No Overloading: Do not exceed the rated current of the LED driver. Ensure the total wattage of connected LEDs does not surpass the driver's maximum output.
• Ensure Ventilation: Maintain sufficient clearance around the unit for proper heat dissipation. Do not cover the driver or install it in an enclosed space without adequate airflow.
• Professional Installation Recommended: For electrical connections, it is advisable to consult a qualified electrician.

3. Specifications

The XIANGCLEAR Intelligent LED Driver is available in several power configurations. Refer to the table below for detailed specifications:

Scope of Application: This LED driver is suitable for a wide range of lighting applications, including LED bulbs, spotlights in cabinets, GU10 fixtures, ceiling lamps, fish tank lamps, buried lamps, downlights, panel lights, track spotlights, floodlights, solar street lamps, and magnetic absorption lamps.

4. Installation

4.1 Power Connection

Insert the power cord into a power outlet. Ensure all connections are secure before activating the power supply. The driver is designed for AC 170-245V input.

4.2 APP Setup and Pairing

To utilize the APP control features, follow these steps:

1. Open a web browser on your smartphone.
2. Scan the QR code provided on the LED driver unit or in the functional instructions to download the control APP.
3. Ensure Bluetooth is enabled on your smartphone.
4. Turn on the wall switch connected to the lamp; the lamp should illuminate.
5. Within the APP, locate and click the option to "pair code" or synchronize with the device.

5. Operating Instructions

5.1 Remote Control Operation

The included 2.4G remote control allows for convenient adjustment of your lighting. Please note that the remote control does not include a battery.

• Lamp ON/OFF: Use the 'ON' and 'OFF' buttons to toggle the light.
• Brightness Adjustment: Use the '+' and '-' buttons to increase or reduce brightness.
• Color Temperature Adjustment: Use the 'Color Temp +' and 'Color Temp -' buttons to increase or reduce the color temperature.
• Warm Light / White Light: Dedicated buttons for quick selection of warm or white light.
• Color Temp Switch: Cycles through available color temperature presets.
• Full/Semi Brightness: Toggles between full and a semi-brightness level.
• Night Light: Activates a low-brightness night light mode.
• Auxiliary Light (No Need): This function may not be active or required for all setups.
• SETUP: Used for pairing the remote with the LED driver.

5.2 APP Control Operation

The dedicated smartphone APP provides comprehensive control over your lighting, including color temperature, intensity, and various modes.

• Color Temperature Adjusting: Adjust the light's color from warm to cool.
• Intensity Control: Fine-tune the brightness level.
• Warm Light / White Light / Neutral Light: Select desired light color presets.
• Night Light: Activate a soft night light mode.
• Auxiliary Lamp: Control additional lamp features if available.
• The Code / Synchronization Control: Used for pairing and synchronizing multiple devices.
• The Voice Function: If supported, enables voice commands for control.
• ON/OFF: Power the lighting on or off.

5.3 Manual Current Adjustment

If your model features a physical adjustment knob, rotate it to set the desired current value for the connected LEDs. Press the power switch to activate the output.

6. Maintenance

• Cleaning: Gently wipe the exterior of the LED driver with a dry, soft cloth. Do not use liquid cleaners or solvents.
• Ventilation: Regularly check that the ventilation openings on the driver are not obstructed to ensure proper heat dissipation and prevent overheating.
• Environmental Conditions: Store and operate the device in a dry environment, away from extreme temperatures and direct sunlight.

7. Troubleshooting (FAQs)

Q: The unit fails to start.

A: Verify that the power supply is properly connected to the LED driver and the power outlet. Check if the wall switch is on.

Q: The current output is unstable.

A: If your model has a regulation knob, try adjusting it. Also, inspect the connected load (LEDs) for any issues or loose connections.

Q: The remote control is not working.

A: Ensure the remote has a working battery. Try re-pairing the remote with the LED driver using the 'SETUP' button on the remote.

Q: The APP cannot connect to the driver.

A: Make sure Bluetooth is enabled on your phone and the driver is powered on. Follow the APP pairing steps (Section 4.2) again. Ensure the APP is up to date.

8. User Tips

• For optimal performance and longevity, ensure the total wattage of your LED strips or chandeliers does not exceed 80% of the driver's maximum rated power.
• When installing, consider accessibility for future maintenance or adjustments, especially if using the manual current adjustment knob.
• Keep the remote control in a safe place and consider using rechargeable batteries for convenience.

9. Warranty and Support

The XIANGCLEAR Intelligent LED Driver comes with a 3-year warranty from the date of purchase. For any issues, online consultation and after-sales support are available. Please refer to the seller's contact information for support.

User Manual PDF: A detailed user manual in PDF format is available for download. Please refer to the product page or contact customer support for the link: View User Manual (PDF)