Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your DayPlus 21V Cordless Drill Driver. Please read this manual thoroughly before using the tool and keep it for future reference.
The DayPlus 21V Cordless Drill Driver is a versatile power tool designed for various drilling and screwdriving tasks in wood, metal, drywall, and plastics. Its compact and lightweight design, combined with a powerful 21V motor and 1500mAh battery, makes it ideal for home improvement, DIY projects, and light professional use.
General Safety Instructions
WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
- Always wear appropriate personal protective equipment, including safety glasses, gloves, and hearing protection.
- Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
- Keep children and bystanders away while operating a power tool.
- Ensure the power tool is switched off before making any adjustments, changing accessories, or storing power tools.
- Use the correct power tool for your application. Do not force the tool.
- Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
- Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
- Use only with the specified battery pack and charger.
Package Contents
Please check the package carefully to ensure all items are present and undamaged:
- 1x Cordless Drill Body
- 1x or 2x Battery (depending on purchase)
- 1x Charger
- 29x Accessories (Drill Bit Set, Screwdriver Bits, Sockets, Flexible Drill Shaft, etc.)
- 1x Pair of Gloves
- 1x Carrying Case
- 1x User Manual (this document)


Product Overview
Familiarize yourself with the components of your DayPlus Cordless Drill Driver:

- Keyless Chuck: For quick and easy bit changes.
- Torque Adjustment Ring: To select the desired torque setting (25+1 positions).
- Speed Selector Switch: For high or low-speed operation.
- Forward/Reverse Switch: To change rotation direction.
- Trigger Switch: For variable speed control.
- LED Work Light: Illuminates the work area.
- Battery Pack: 21V 1500mAh Lithium-ion battery.
- Battery Release Button: To remove the battery.
- Soft Grip Handle: For comfortable and secure handling.
Specifications
| Feature | Detail |
|---|---|
| Type | Cordless Drill Driver |
| Brand Name | DayPlus |
| Rated Voltage | 21V |
| Power Source | Battery (Lithium-ion 1500mAh) |
| No-Load Speed | 0-400rpm (1st speed), 0-1400rpm (2nd speed) |
| Maximum Torque | 45Nm |
| Torque Settings | 25+1 |
| Keyless Chuck Size | 0.8-10mm (3/8 inch) |
| Max. Drilling Capacity (Metal) | 10mm |
| Max. Drilling Capacity (Wood) | 23mm |
| Charging Time | 1.5-3 hours |
| Operating Time | 30-45 minutes (approx.) |
| Weight (Drill Body + 1 Battery) | 1.55kg / 3.4lbs |
| Product Size | 19 x 7.1 x 20 cm (7.48" x 2.8" x 7.87") |
| Certification | CE |
| Application | For wood, metal, ceramic, tiles, drilling and other DIY projects |
Setup
1. Charging the Battery
- Ensure the battery is securely attached to the charger.
- Plug the charger into a standard power outlet.
- The charging indicator light on the charger will show the charging status (refer to charger manual for specific light indications).
- A full charge typically takes 1.5-3 hours. Do not overcharge the battery.
- Once fully charged, disconnect the charger from the power outlet and remove the battery.

2. Installing/Removing the Battery
- To install: Align the battery pack with the base of the drill handle and slide it in until it clicks securely into place.
- To remove: Press the battery release button (located at the front of the battery pack) and slide the battery out.
3. Installing/Removing Drill Bits or Screwdriver Bits
The drill features a 3/8-inch keyless chuck for easy bit changes.
- Ensure the drill is switched off and the forward/reverse switch is in the center (locked) position.
- Rotate the chuck counter-clockwise to open the jaws.
- Insert the desired drill bit or screwdriver bit into the chuck, ensuring it is centered.
- Rotate the chuck clockwise to tighten the jaws firmly around the bit. Hand-tighten only; do not use tools.
- To remove: Rotate the chuck counter-clockwise to loosen the jaws and pull the bit out.

Operating Instructions
1. Powering On/Off and Variable Speed Control
- To turn on the drill, press the trigger switch. The speed is variable; the harder you press the trigger, the faster the drill will operate.
- To turn off, release the trigger switch.
2. Speed Settings (2-Speed Gearbox)
The drill has two speed settings, selected via the speed selector switch on top of the drill:
- Position 1 (Low Speed, 0-400rpm): Ideal for screwdriving and drilling larger holes in softer materials where higher torque is needed.
- Position 2 (High Speed, 0-1400rpm): Suitable for fast drilling in wood, metal, and other materials where speed is prioritized over torque.
Always adjust the speed setting before starting the drill.

3. Torque Adjustment (25+1 Positions)
The torque adjustment ring allows you to select the amount of rotational force applied. This is crucial for screwdriving to prevent over-tightening or stripping screws, and for drilling in delicate materials.
- Rotate the torque adjustment ring to select a setting from 1 to 25. Lower numbers are for smaller screws and softer materials; higher numbers are for larger screws and harder materials.
- The "Drill" symbol (25+1) setting bypasses the clutch and provides maximum torque for drilling applications.

4. Forward/Reverse Switch
The forward/reverse switch controls the direction of rotation and also acts as a lock-off button.
- Forward (clockwise rotation): Push the switch to the left for drilling and driving screws.
- Reverse (counter-clockwise rotation): Push the switch to the right for removing screws or backing out drill bits.
- Lock-off: When the switch is in the center position, the trigger is locked, preventing accidental startup. Always engage the lock-off when changing bits, performing maintenance, or storing the tool.

5. LED Work Light
The integrated LED work light automatically illuminates when the trigger is pressed, providing visibility in dimly lit work areas.

6. Applications
The DayPlus 21V Cordless Drill Driver is suitable for a wide range of tasks:
- Drilling: Use appropriate drill bits for wood, metal, plastic, or masonry (with masonry bits).
- Screwdriving: Use appropriate screwdriver bits and adjust torque settings to match the screw size and material.

Maintenance
- Cleaning: Regularly clean the ventilation openings to prevent dust buildup, which can damage the motor. Use a soft, dry cloth. Do not use water or chemical cleaners.
- Chuck Maintenance: Keep the chuck jaws clean and free of debris to ensure proper bit gripping.
- Battery Care: Store batteries in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods.
- Storage: When not in use, store the drill, batteries, and accessories in the provided carrying case in a dry, secure location out of reach of children.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drill does not start | Battery not charged or improperly installed; Forward/Reverse switch in center (locked) position. | Charge battery and ensure it's correctly installed; Move Forward/Reverse switch to desired direction. |
| Loss of power during operation | Battery is low or discharged. | Recharge the battery. |
| Bit slips in chuck | Chuck not tightened sufficiently; Bit shank is dirty or damaged. | Ensure chuck is hand-tightened firmly; Clean or replace the bit. |
| Over-tightening or stripping screws | Torque setting is too high. | Adjust the torque setting to a lower number appropriate for the screw and material. |
| Drill overheats | Continuous heavy use; Blocked ventilation openings. | Allow the drill to cool down; Clean ventilation openings. |
User Tips
- For optimal performance and battery life, avoid completely draining the battery before recharging.
- When drilling into hard materials, start with a pilot hole and gradually increase the drill bit size.
- Always apply steady, even pressure when drilling or driving screws.
- If you need to replace or reorder batteries, check with the manufacturer or authorized dealers for compatible DayPlus 21V 1500mAh batteries.
- Ensure the plug type (EU/UK) matches your region for the charger.
Warranty and Support
DayPlus products are manufactured to high-quality standards. For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your purchase or contact the seller directly. Keep your proof of purchase for any warranty claims.