1. Introduction
The MOMAN H2 Pro is a advanced Bluetooth helmet intercom system designed for motorcycle riders, offering seamless communication and entertainment on the go. It allows two riders to communicate in real-time over a distance of up to 800 meters. With Bluetooth 5.0 technology, DSP noise reduction, and an IP65 waterproof rating, the H2 Pro ensures clear audio and reliable performance in various conditions.
2. Package Contents
Please check the box for the following items:
- H2P Intercom x2
- Velcro Clip x2
- Back Clip x2
- Hook and Loop Fasteners x2
- Replaceable Hard Mic and Soft Mic Speakers x2
- Manual x1
- USB Cable x2
- Screw Driver x2
- Headphone Velcro x8
3. Specifications
| Feature | Specification |
|---|---|
| Model | H2 pro |
| Brand Name | MOMAN (JYYXF) |
| Intercom Range | Up to 800 meters (for 2 riders) |
| Bluetooth Version | 5.0 |
| Battery Capacity | 900mAh |
| Working Time | Up to 20 hours |
| Standby Time | Up to 300 hours |
| Waterproof Rating | IP65 |
| Operating Temperature | -20°C to 50°C |
| Speaker Size | 40mm |
| Noise Reduction | DSP Technology |
| Microphone Type | Wireless Microphone (Omnidirectional) |
| Connectivity | Wired (for speakers/mic connection to unit) |
| Compatible Device | Pro Studio |
| Hign-concerned Chemical | None |
| Origin | Mainland China |
4. Setup and Installation
4.1 Helmet Compatibility
The MOMAN H2 Pro is designed to be compatible with a wide range of helmet types, including:
- Full helmet
- Half helmet
- Uncover helmet
- Retro helmet
- Motocross helmet
4.2 Attaching the Intercom Unit
The intercom unit can be attached to your helmet using either the provided Velcro clip or the rear clip. Choose the method that best suits your helmet and ensures a secure fit.
- Velcro Clip: Attach the Velcro clip to the side of your helmet. Ensure the surface is clean and dry for optimal adhesion. Then, slide the intercom unit onto the clip.
- Rear Clip: Secure the rear clip to the edge of your helmet. Use the included screwdriver to tighten if necessary. Once the clip is firmly in place, attach the intercom unit.
4.3 Speaker and Microphone Installation
Install the speakers inside your helmet, aligning them with your ears for optimal audio. The microphone should be positioned close to your mouth to ensure clear voice transmission. Use the provided headphone Velcro pads to secure the speakers and microphone.
4.4 Initial Charging
Before first use, fully charge the MOMAN H2 Pro using the provided USB cable. Connect the USB cable to the intercom unit and a suitable power source (e.g., USB wall adapter, computer USB port). The charging indicator will show the charging status.
4.5 Bluetooth Pairing with Phone
- Ensure the H2 Pro is turned off.
- Press and hold the power button until the indicator light flashes rapidly, indicating pairing mode.
- On your mobile phone, go to Bluetooth settings and search for available devices.
- Select 'MOMAN H2 Pro' from the list to pair.
- Once paired, the indicator light will change, and you will hear a confirmation tone.
4.6 Intercom Pairing (Two Riders)
- Ensure both H2 Pro units are turned off.
- On both units, press and hold the intercom button until the indicator lights flash rapidly, indicating intercom pairing mode.
- The units will automatically search and connect to each other.
- Once connected, the indicator lights will change, and you will hear a confirmation tone.
5. Operating Instructions
The MOMAN H2 Pro features a special knob design for intuitive control of various functions.
5.1 Power On/Off
- Power On: Press and hold the power button until the indicator light turns on.
- Power Off: Press and hold the power button until the indicator light turns off.
5.2 Music Control
- Play/Pause: Short press the knob.
- Next Music: Rotate the knob clockwise (1).
- Previous Music: Rotate the knob counter-clockwise (2).
5.3 Volume Control
- Increase Volume: Rotate the knob clockwise (2).
- Decrease Volume: Rotate the knob counter-clockwise (1).
Note: There is a voice alarm for excessively high or low volume levels.
5.4 Phone Calls
- Answer Call: Short press the phone button.
- End Call: Short press the phone button during a call.
- Refuse Call: Press and hold the phone button when a call comes in.
- Redial Last Number: Double-press the phone button.
5.5 Intercom Function
- Start Intercom: Short press the intercom button to initiate communication with a paired unit.
- End Intercom: Short press the intercom button again to end the intercom session.
5.6 Voice Assistant
Activate your phone's voice assistant (e.g., Siri, Google Assistant) by pressing the dedicated Voice Assistant button (if available) or a specific combination as per your phone's settings after pairing.
5.7 FM Radio
The H2 Pro supports FM radio. Use the knob to choose FM radio channels. Specific instructions for scanning and saving channels may vary; refer to the full manual for detailed steps.
6. Maintenance
6.1 Cleaning
Wipe the intercom unit with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the device.
6.2 Waterproofing
The H2 Pro has an IP65 waterproof design, protecting it from rain and dust intrusion. While it is resistant to water splashes and light rain, avoid submerging the unit in water.
6.3 Battery Care
- Charge the device regularly, especially if it has not been used for a long period, to maintain battery health.
- Avoid exposing the device to extreme temperatures (below -20°C or above 50°C) for extended periods, as this can affect battery life and performance.
6.4 Storage
When not in use, store the H2 Pro in a cool, dry place away from direct sunlight and extreme temperatures.
7. Troubleshooting
- No Power: Ensure the battery is charged. Connect the device to a power source using the USB cable.
- Cannot Pair Bluetooth: Make sure the H2 Pro is in pairing mode (rapidly flashing indicator light). Ensure your phone's Bluetooth is on and visible. Try restarting both devices.
- No Audio/Low Volume: Check the volume level on both the H2 Pro and your connected phone. Ensure speakers are correctly positioned inside the helmet.
- Intercom Not Connecting: Ensure both units are in intercom pairing mode. Make sure they are within the 800-meter range.
- Poor Sound Quality: Check microphone placement. DSP noise reduction helps, but extreme wind noise can still affect clarity. Ensure the speakers are properly installed.
- Voice Alarm for Volume: This is a feature to alert you when the volume is too high or too low. Adjust the volume to a comfortable level.
8. Warranty and Support
8.1 Warranty Information
The MOMAN H2 Pro comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, accidents, or unauthorized modifications.
8.2 Customer Support
For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or MOMAN customer service through the platform where you purchased the product. Refer to your purchase documentation for specific contact details.
