1. Safety Warnings
- Do not disassemble or modify the product.
- Take care to avoid burns during use, as the heating element reaches high temperatures.
- Avoid use in damp environments to prevent electrical hazards.
2. Product Overview
The Bakon BK853B Heating Element is a replacement heating core designed for various Bakon hot air gun handles, including models BK602s, BK858, BK858S, and BK858E. It is available in both 110V and 220V versions to suit different power requirements.
3. Installation and Setup
Important Notice: The BK853B heating element is specifically designed for the handle of the BK602s desoldering stand and other compatible Bakon hot air gun handles (BK858, BK858S, BK858E). Please confirm your iron handle model before purchasing and installation to prevent damage caused by model mismatch.
- Ensure the power to the soldering station is completely turned off and unplugged before beginning installation.
- Carefully disassemble the hot air gun handle to access the heating element compartment. Refer to your specific hot air gun handle's manual for detailed disassembly instructions if needed.
- Remove the old or damaged heating element.
- Insert the new BK853B heating element into the designated mounting position within the soldering iron handle. Ensure it fits securely and all connections align properly.
- Reconnect any wiring as per the original configuration.
- Reassemble the hot air gun handle.
4. Operating Instructions
- After successfully installing the heating element and reassembling the handle, connect the hot air gun handle to the soldering station.
- Power on the soldering station.
- Allow approximately 3 seconds for the heating element to preheat and reach its operating temperature.
Operating Precautions:
- Do not operate the heating element at high temperature without load (i.e., without air flowing through the hot air gun) for extended periods, as this can shorten its lifespan.
5. Maintenance and Care
The heating element is a consumable component and its lifespan is subject to usage patterns. Regular care can help prolong its life.
- After each use, turn off the power to the soldering station and allow the heating element to cool down completely before storage.
- Store the hot air gun handle and heating element away from flammable materials.
- Keep the heating element clean and free from debris.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heating element does not heat up | Power connection issue | Check whether the power connection is normal and secure. |
| Temperature is too high or inconsistent | Possible thermostat malfunction | If the issue persists, the thermostat or control circuit may require inspection by a qualified technician. |
| Difficulty installing the heating element | Incompatibility or incorrect alignment | Verify the compatibility of the heating element with your handle model and ensure the handle bore dimensions match. |
7. Specifications
| Feature | Description |
|---|---|
| Product Name | Heating Element |
| Brand | BAKON |
| Model Number | BK853B (Compatible with BK602s, BK858, BK858S, BK858E handles) |
| Rated Voltage Options | 110V, 220V |
| Usage | Home DIY / Rework Soldering Stations |
| Heating Speed | Rapid Heating (Reaches operating temperature within 3 seconds) |
| Temperature Stability | Maintains set temperature consistently |
| Design | Durable, Heat-resistant, Anti-aging |
| Origin | Mainland China |
For a detailed user manual in PDF format, please refer to the official document: User manual (PDF)
8. User Tips
- Always double-check the compatibility of the heating element with your specific hot air gun handle model before purchase and installation.
- Remember that heating elements are consumable parts and may need replacement over time, depending on usage frequency and intensity.
- Ensure proper ventilation when using hot air tools to dissipate fumes and heat safely.
9. Warranty and Support
For assistance, technical support, or any after-sales service inquiries, please contact the customer service department of your retailer or the manufacturer directly.