BAKON BK1370s/1370

Contents

Bakon 1370/1370s Heating Core User Manual

For BK602s, BK969, BK858E Soldering Stations and BK606 Soldering Iron

1. Introduction

This manual provides essential information for the safe and effective use of your Bakon 1370 and 1370s heating cores. These ceramic heating elements are designed for rapid temperature rise and stable temperature maintenance, suitable for various Bakon soldering equipment.

Video: Product overview demonstrating the Bakon 1370 and 1370s heating elements and their compatibility with various soldering tools.

2. Safety Warnings

  • Do not disassemble or modify the product.
  • Take care to avoid burns during use, as the heating element reaches high temperatures rapidly.
  • Avoid use in damp environments to prevent electrical hazards.

3. Product Overview

The Bakon heating cores are available in two main models:

  • Bakon 1370s Heating Element: Specifically designed for the BK606s Soldering Iron.
  • Bakon 1370 Heating Element: Compatible with BK969 and BK601s Soldering Stations, and BK905 and BK902s handles.

Both models feature a plug-in ceramic heating core design, ensuring rapid temperature rise and stable temperature output. The metal shell provides fall resistance for enhanced durability.

Bakon 1370 heating element with images of compatible BK969 and BK601s soldering stations, and BK905 and BK902s handles.

Figure 1: Bakon 1370 Heating Element and Compatible Equipment

Bakon 1370s heating element with an image of the compatible BK606 soldering iron.

Figure 2: Bakon 1370s Heating Element and Compatible Equipment

Diagram illustrating the ceramic heating core with internal heating coils, spring, and fiber tube components.

Figure 3: Ceramic Heating Core Internal Structure

4. Specifications

Feature Detail
Brand BAKON
Model Number BK1370s/1370
Origin Mainland China
Voltage Options 110V, 230V
Package Length 15 cm
Package Width 5 cm
Package Height 5 cm
Package Weight 0.15 kg

5. Setup (Installation)

  1. Ensure Power is Off: Before beginning installation, always ensure that the soldering station or iron is completely powered off and unplugged from the mains.
  2. Insert Heating Element: Carefully insert the new heating element into the designated mounting position within the soldering iron handle. Ensure it is seated correctly and securely.
  3. Reassemble: Reassemble the soldering iron handle, ensuring all components (e.g., soldering tip jacket, insulation sleeve, non-slip sheath) are correctly aligned and tightened.
Exploded view diagram showing how to replace the heating core in a soldering iron, including soldering tip jacket, 900M soldering iron tip, bakelite insulation sleeve, non-slip sheath, and BK1370s heating core.

Figure 4: Easy Replacement Diagram for Heating Core

6. Operating Instructions

  1. Connect Power: Plug in your soldering station or iron and turn on the power.
  2. Preheating: After connecting power, wait approximately 3 seconds for the heating element to reach its operating temperature.
  3. Temperature Stability: The heating core is designed to maintain the set temperature consistently for reliable soldering.

7. Precautions

  • Do not operate the heating element at high temperature without a load (e.g., soldering tip) for extended periods, as this can shorten its lifespan.
  • Always turn off the power after use and allow the heating element to cool down completely before storage.
  • Keep the heating element and associated equipment away from flammable materials.

8. Maintenance

To ensure optimal performance and longevity of your Bakon heating core:

  • Regularly inspect the heating element for any signs of physical damage or wear.
  • Keep the area around the heating element clean and free from debris.
  • Ensure proper ventilation during use to prevent overheating of the surrounding components.

9. Troubleshooting

If you encounter any issues, refer to the following troubleshooting guide:

  • Heating element does not heat up: Check if the power connection to the soldering station/iron is normal and secure. Ensure the device is switched on.
  • Temperature is too high/unstable: This could indicate a possible thermostat malfunction in your soldering station or iron. Consult the manual for your specific soldering equipment.
  • Difficulty installing: Verify the compatibility of the heating element with your soldering iron handle's bore dimensions. Ensure you have the correct 1370 or 1370s model for your equipment.

10. User Tips

Based on user feedback, here are some general tips:

  • Always confirm your soldering iron handle model (e.g., BK606s, BK969, BK601s) before purchasing a replacement heating element to ensure compatibility.
  • Heating elements are consumable parts; their lifespan can vary based on usage and operating conditions.

11. Warranty & Support

For assistance, technical support, or warranty inquiries, please contact Bakon customer service or the official store where you purchased the product.

An official user manual in PDF format may be available for more detailed information. Please refer to the product page or contact support for access to this document: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.