1. Product Overview
Thank you for purchasing our Tire Pressure Monitoring System (TPMS). This system is designed to provide enhanced protection while driving by continuously monitoring tire conditions. After installation, the TPMS system monitors tire pressure and temperature in real time. If any abnormal tire pressure or temperature is detected, the system will emit a warning sound and display a bright flashing icon to alert the driver. Real-time reminders and problem-solving capabilities help prevent traffic accidents and ensure the safety of drivers and passengers.
Key Features:
- Solar power charging, eliminating the need for constant car cigarette lighter connection.
- Additional USB charging for versatile power options.
- Colorful LCD Digital display for clear tire information.
- Real-time monitoring of pressure and temperature for all 4 tires.
- Alerts for low air pressure, high temperature, leakage, and low battery.
- Intelligent Shock Boot: Automatically turns on when the car is moving and off when stationary, no manual operation required.
- Wireless connection by sensors for easy installation.
- Available with both built-in and external sensor options to meet various needs.
- Equipped with Freescale chip sensors, compatible with almost 98% of cars on the market.
- Durable design: Waterproof, Anti-stress, Shockproof, Dust-proof.


2. Specifications
2.1. General Monitor Specifications
| Attribute | Value |
|---|---|
| Voltage | 5V |
| Special Features | Solar Energy |
| Item Weight | 0.4 kg |
| Item Height | 26 mm |
| Item Width | 81 mm |
| Item Length | 77 mm |
| Material | Plastic |
| Certifications | RoHS, FCC, eec, CE, CCC, CC |
| Origin | Mainland China |

2.2. External Sensor Specifications (K01)
| Attribute | Value |
|---|---|
| Working Voltage | 2.1-3.5V |
| Working Temperature | -20℃ ~ 85℃ |
| Pressure Accuracy | ±2psi |
| Frequency | 433.92 MHZ |
| Pressure Rate | 0 ~ 3.5Bar / 0 ~ 50psi |
| Temperature Rate | -20℃ ~ 85℃ |
| Temperature Accuracy | ±3℃ |
| Battery Life | 2 Years (Replaceable) |
2.3. Internal Sensor Specifications (K02)
| Attribute | Value |
|---|---|
| Working Voltage | 2.1-3.5V |
| Working Temperature | -40℃ ~ 125℃ |
| Pressure Accuracy | ±2psi |
| Frequency | 433.92 MHZ |
| Pressure Rate | 0 ~ 3.5Bar / 0 ~ 50psi |
| Temperature Rate | -40℃ ~ 125℃ |
| Temperature Accuracy | ±3℃ |
| Battery Life | 5 Years (Not replaceable) |

3. Package Contents
The package typically includes the following items:
- TPMS Monitor Unit
- Instructions Manual (Multilingual)
- USB Power Cable
- Fixed Sticker
- For K01 (External Sensors): 4 x External TPMS Sensors, 1 x Wrench, 4 x Screw Nuts
- For K02 (Built-in Sensors): 4 x Built-in TPMS Sensors, 1 x Tool (for installation)

4. Setup and Installation
Important: Before installing any sensors, press and hold the power button on the monitor to turn it on.

4.1. External Sensor Installation (K01)
- First, press and hold the left button on the host to turn on the monitor.
- Screw the anti-theft nut onto the valve nozzle.
- Install the sensor onto the valve according to its position (e.g., FL for Front Left, FR for Front Right, RL for Rear Left, RR for Rear Right) and tighten it.
- Screw the anti-theft nut back against the sensor and tighten it with the provided wrench.
- If no pressure is displayed for a corresponding tire on the monitor, reinstall the sensor.

4.2. Built-in Sensor Installation (K02)
Note: Built-in sensors require professional installation, typically by a car service center.
- First, press and hold the left button on the main unit to turn on its power.
- Install the sensor into the tire according to the correct position.
- Replace the original car valve with the new sensor.
- Inflate the tires sequentially after installation. Ensure the tires are inflated when the main unit is turned on.
- After installation, the product does not require any further settings and does not need to be manually turned on or off.

4.3. Monitor Placement
Apply the adhesive to the bottom of the main unit and place it in a suitable position on the dashboard, typically on the left side of the center console, ensuring it has access to sunlight for solar charging.

5. Operating Instructions
5.1. Interface and Display Description

- Power/Left button: Used to power on/off the device and navigate left in menus.
- SET button: Used to enter menu mode and confirm selections.
- Right button: Used to navigate right in menus and turn off alarms.
- Solar energy: Indicates solar charging status.
- Solar icon: Displays when solar charging is active.
- Tire pressure units: Shows the current pressure unit (e.g., Bar, Psi).
- Tyre temperature: Displays the temperature for each tire.
- Tire Pressure: Displays the pressure for each tire.
- Temperature unit: Shows the current temperature unit (e.g., °C, °F).
- Battery: Indicates the monitor's battery level.
- Clock: Displays the current time (for models with clock function).
5.2. Button Function Description
- USB Charging Port: Located on the side, this is the interface for USB charging of the receiver.
- Power/Left Button:
- In standby mode: Short press to adjust brightness.
- Long press: To turn the monitor on and off.
- In menu mode: Navigates left through options.
- Right Button:
- In standby mode: Short press to adjust brightness.
- Long press: To turn off the alarm sound.
- In menu mode: Navigates right through options.
- SET Button (M Menu/Confirm Button):
- In standby mode: Long press for 3 seconds to enter menu mode.
- In menu mode: Short press once to confirm the selected parameter.
5.3. Basic Functions
- Default Settings: The factory default tire pressure unit is BAR, temperature unit is °C. The upper limit for tire pressure is 3.2 bar, the lower limit is 1.8 bar, and the temperature alarm value is 68°C.
- Backlight Brightness: The backlight brightness automatically adjusts according to ambient light intensity. It can also be manually adjusted using the left and right buttons.
5.4. Unit Setting (Bar/°C is default)
To change units (e.g., from Bar to Psi, or °C to °F):
- In standby mode, long press the SET button for 3 seconds to enter the system setting state. The Bar icon will appear.
- Press the SET button again to enter the operable setting state.
- Use the Left and Right buttons to select the desired pressure unit (Bar or Psi).
- Press the SET button to confirm the selection.
- To change temperature units, while in the system setting state (after step 1), press the Right button once.
- Press the SET button to enter the operable setting state.
- Use the Left and Right buttons to select the desired temperature unit (°C or °F).
- Press the SET button to confirm the selection.
5.5. Time Setting (For models with clock function only)
- In standby mode, long press the SET button for 3 seconds to enter the system setting state.
- Press the Right button twice to enter the time setting mode.
- Short press the SET button twice; the hour number will flash.
- Use the Left and Right buttons to adjust the hour.
- After setting the hour, short press the SET button to set the minutes.
- Use the Left and Right buttons to adjust the minutes.
- Long press the SET button to exit the setting after the time is complete.
5.6. Adjusting Tire Pressure Limits
You can set custom upper and lower pressure limits for alarms.
- In standby mode, long press the SET button for 3 seconds to enter the system setting state.
- Press the Right button twice to enter the maximum air pressure setting.
- Press the SET button once; the air pressure number will flash.
- Use the Left and Right buttons to set the desired maximum air pressure.
- Long press the SET button to exit.
- To set the lower limit, repeat step 1. Then press the Right button three times to enter the lower limit setting.
- Press the SET button once; the barometric pressure number will flash.
- Use the Left and Right buttons to set the desired lower limit pressure.
- Long press the SET button to exit after setting.
5.7. Adjusting Tire Temperature Limits
You can set a custom upper temperature limit for alarms.
- In standby mode, long press the SET button for 3 seconds to enter the system setting state.
- Press the Right button four times to enter the tire temperature upper limit setting.
- Short press the SET button once; the tire temperature number will flash.
- Use the Left and Right buttons to set the desired highest upper limit temperature.
- Long press the SET button to exit after the setting is complete.
6. Maintenance
6.1. External Sensor Battery Replacement (K01)
When replacing the battery of an external sensor, please disassemble and replace one by one to avoid mixing up sensors or components. The external sensors use CR1632 button batteries (working temperature requirement: -30°C ~ 80°C).
- Prepare a nut wrench. Turn the anti-theft nut clockwise to separate it from the sensor. Then remove the sensor counter-clockwise.
- Use a wrench to unscrew the upper cover of the sensor in a counter-clockwise direction.
- Carefully remove the old battery from the battery holder. Dispose of it responsibly.
- Note the positive (+) and negative (-) positions. Install a new CR1632 lithium battery with the positive side facing upwards.
- Screw on the upper cover of the sensor and tighten it clockwise with a wrench.

6.2. Single Sensor Replacement and Pairing
If a single sensor needs replacement, first remove the old sensor. Then, install the new sensor (built-in or external) onto the tire.
- In standby mode, long press the SET button for 3 seconds to enter the system setting state.
- Press the Right button five times to enter the pairing selection mode. The '0' number on the interface will flash, defaulting to the front left wheel.
- Use the Left and Right buttons to select the position of the sensor to be replaced (0 = front left, 1 = front right, 2 = rear left, 3 = rear right).
- After selecting the correct position, press the SET button. The number will flash.
- Install the new sensor on the tire. If it's a built-in sensor, inflate and deflate the tire when the number flashes.
- Observe the monitor for a change in the displayed number, indicating successful pairing.
- Once paired, long press the SET button to exit.
Note: During this pairing process, any sensor can be matched to any position.
6.3. Restore Factory Settings (Re-pairing All Sensors)
To reset the monitor and re-pair all sensors:
- In the power-on state, press and hold the SET button for 3 seconds to enter the settings.
- Press the Left button again to navigate to item 7.
- Press the SET button twice to reset the machine and restore factory settings. The monitor will then search for sensors.
- To update sensors, install the new sensors on the valves in order, or drive the car at a speed of 30 km/h or more after resetting.
- After driving for approximately 10-30 minutes, the host will automatically search for sensor signals.
- The pairing is complete once all 4 sensors are found.
After restoring factory settings, any previously manually set data will revert to the factory defaults.
7. Troubleshooting
- Sensor not synchronizing: If a sensor does not synchronize immediately after installation, try unscrewing it, waiting a few seconds, and then screwing it back on firmly. Ensure the monitor is turned on during this process.
- Inaccurate pressure readings: While sensors are generally accurate, the display may round values. For example, 2.21 bar might display as 2.2 bar, and 2.18 bar as 2.1 bar. This is normal display behavior.
- Monitor rattling: If the circuit board inside the monitor feels loose or rattles, carefully open the monitor and place a small piece of foam between the board and the cover to secure it.
- Monitor not turning on/off automatically: Ensure the 'Intelligent On and Off' feature is enabled. The monitor should automatically turn off when stationary and turn on with car movement. If it's not working, check for obstructions to the solar panel or ensure it's receiving sufficient light.
- High pressure readings for van tires: The system is designed for a pressure range of 0-3.5 Bar (0-50 PSI). If your van tires require higher pressure (e.g., 4.2 Bar), this system may not be suitable as it will trigger high-pressure alarms.
8. User Tips
- Initial Sensor Synchronization: After installing all sensors and turning on the monitor, if a sensor doesn't immediately display data, try unscrewing and then re-screwing each sensor back in. This often helps establish communication.
- Display Precision: Be aware that the monitor's display may round pressure values. A reading of 2.21 bar might show as 2.2 bar, and 2.18 bar as 2.1 bar.
- Addressing Internal Rattling: If you notice a slight rattling sound from the monitor, it might be a loose circuit board. A user tip suggests placing a small piece of foam between the board and the cover to secure it.
- Manual Power Control: While the monitor features intelligent auto on/off, you can manually turn it off if you find the auto-on feature inconvenient in certain situations.
- Solar Charging Efficiency: Ensure the monitor's solar panel is exposed to sunlight for optimal charging. Users report good performance with solar charging.
- External Sensor Security: External sensors protrude slightly. While convenient for installation, ensure they are securely tightened with the anti-theft nuts to prevent loss.
9. Frequently Asked Questions (FAQ)
- Q: Is this TPMS compatible with my car model (e.g., Toyota Corolla 2004, Toyota RAV4 2024, Toyota Prado 2008, Ford CMAX 2016)?
- A: The E-ACE TPMS system is designed to be compatible with almost 98% of cars on the market, including Car, SUV, ORV, MPV, Minibus, and Wagon types. Specific model compatibility is generally broad, but always ensure the sensor type (external or built-in) is suitable for your wheel type.
- Q: Can I use this for van tires that need to be pumped to 4.2 bar?
- A: The system's pressure range is 0-3.5 Bar (0-50 PSI). If your van tires require a pressure of 4.2 bar, this system will continuously trigger a high-pressure alarm and is not suitable for your vehicle.
- Q: How do I connect the device with the four sensors?
- A: The sensors connect wirelessly to the monitor. For external sensors, simply screw them onto the valve stems after turning on the monitor. For built-in sensors, professional installation is required. The system typically synchronizes automatically upon installation and movement. Refer to Section 4 for detailed installation steps.
- Q: Are the wheel sensors sold separately? What happens when the battery runs out?
- A: Yes, individual sensors can often be purchased separately. For external sensors (K01), the CR1632 battery is replaceable (refer to Section 6.1). For internal sensors (K02), the battery is not replaceable, but they have a longer battery life of about 5 years.
- Q: Can a single sensor be replaced if it is damaged, or do all of them need to be changed?
- A: A single sensor can be replaced and re-paired with the monitor. Refer to Section 6.2 for instructions on single sensor replacement and pairing.
- Q: How do I turn on the auto mode so that the device turns off when parked and turns on when driving?
- A: The E-ACE TPMS features an "Intelligent Shock Boot" function. It automatically turns on when it detects vehicle movement and turns off when the car is stationary. No manual activation of this mode is typically required. Ensure the monitor is powered on and placed where it can detect vibrations.
- Q: How many millimeters does the internal sensor protrude? I need to measure to ensure it doesn't collide with the caliper.
- A: Internal sensors are designed to be installed inside the tire, replacing the standard valve stem. Their design is generally compact to avoid interference with vehicle components like calipers. For precise dimensions, please refer to the specifications in Section 2.3 or consult a professional installer.
10. Warranty and Support
E-ACE is committed to providing high-quality products and excellent customer service. For any issues or questions regarding your TPMS system, please refer to the detailed user manual (PDF) available for download or contact customer support.
PDF Manual Reference: A comprehensive user manual in PDF format is available for more detailed instructions and troubleshooting. You can typically find this on the product page or by searching for "E-ACE K01 TPMS User Manual PDF" online.