PDDAXLQUE CP26

Contents

PDDAXLQUE CP26 Bluetooth Serial Adapter Instruction Manual

Wired to Wireless for IoT Device Communication via RS232/RJ45

Introduction

This manual provides detailed information and instructions for the safe and effective use of your PDDAXLQUE CP26 Bluetooth Serial Adapter. Please read this manual thoroughly before operating the device and retain it for future reference.

The CP26 adapter facilitates wired-to-wireless data transmission for IoT devices, converting serial communication (RS232/RJ45) to Bluetooth. It supports both master and slave configurations, enabling flexible connectivity solutions for various applications.

1. Packing List

The contents of your package may vary slightly depending on the specific model purchased (T1 for Mobile Phone, T2 for Computer, T3 for Device-to-Device). Please verify all items are present upon unboxing.

CP26 Mobile Phone Model (T1)

  • DX-CP26 Adapter x1
  • Rod Rubber Antenna x1
  • USB Data Cable x1
  • Instruction Manual x1
  • RJ45 Adapter Cable x1
  • RS232 Adapter Cable (Male Connector) x1

CP26 Computer Model (T2)

  • DX-CP26 Adapter x1
  • Rod Rubber Antenna x1
  • USB Data Cable x1
  • Instruction Manual x1
  • RJ45 Adapter Cable x1
  • RS232 Adapter Cable (Male Connector) x1
  • CP11 Adapter x1

CP26 Device Model (T3)

  • DX-CP26 Adapter x2
  • Rod Rubber Antenna x2
  • USB Data Cable x2
  • Instruction Manual x1
  • RJ45 Adapter Cable x2
  • RS232 Adapter Cable (Male Connector) x2

Video: Unboxing and overview of the DX-CP26 adapter and its components for different control types (smart phone, computer, device-to-device).

CP26 for Mobile Phone (T1) Product List

Image: Product list for CP26 Mobile Phone (T1) model, showing adapter, antenna, USB cable, RS232 cable, RJ45 cable, and instruction manual.

2. Product Specifications

Parameter Value
Brand PDDAXLQUE
Model Number CP26 for Device
Origin Mainland China
Chipset Dialog14531
Application IoT
Function Wired to wireless data transmission
Bluetooth Version Bluetooth 5.1
Visible Distance 400m (unobstructed and open area)
Bluetooth Name RS232/RS485
BLE UUID SERVICE UUID: FFE0, NOTIFY/WRITE UUID: FFE1, WRITE UUID: FFE2
Serial Port Type RS232
Serial Port Default Parameters 9600bps/8/n/1 (Baud rate/Data bits/No parity/Stop bits)
Supported Baud Rates 2400, 4800, 9600, 19200, 38400, 57600, 115200
Power Supply Method DC5-36V
Power Interface Type-C
Interface Type RJ45/RS232 Interface
CP26 Dimensions 60mm x 27.8mm x 16.4mm
CP11 Dimensions 67mm x 25mm x 10mm
Antenna Length 108mm
Basic Parameter List and Dimensions

Image: Basic parameter list and physical dimensions of the CP26 adapter.

3. Interface and Function Specifications

CP26 Product Diagram and Indicators

CP26 Product Diagram with Labeled Ports and Indicators

Image: Detailed diagram of the CP26 adapter with numbered labels for each component.

  1. TX: Data transmission indicator (red)
  2. RX: Data reception indicator (green)
  3. WORK: Operational status indicator (blue)
  4. POWER: Charging indicator (red)
  5. KEY: Power on/off, shutdown & baud rate switch button
  6. USB: USB power supply port, USB charging port (Type-C)
  7. ANT: External antenna connector
  8. RJ45 & RS232: RJ45 wiring port, RJ45 to RS232 communication port

Hardware Interface Parameters

The RS232 communication port defaults to 9600bps/8/n/1 (baud rate/data bit/no parity/stop bit). The module supports software flow control. VCC supply voltage range is 4.5V-6V.

DB9 Male and RJ45 Interface Definitions

Image: Pin definitions for DB9 Male (RS232) and RJ45 interfaces.

DB9_M Pin Definition:

  • PIN 2: TXD
  • PIN 3: RXD
  • PIN 5: GND
  • PIN 1, 4, 6, 7, 8, 9: NC (No Connection)

RJ45 Pin Definition:

  • PIN 3: RXD
  • PIN 4: GND
  • PIN 6: TXD
  • PIN 1, 2, 5, 7, 8: NC (No Connection)

4. Setup and Installation

4.1. Install External Antenna

Screw the provided rod rubber antenna onto the ANT connector of the CP26 adapter.

CP26 Adapter with Antenna

Image: CP26 adapter with the external antenna installed.

4.2. Connect RS232/RJ45 Adapter Cable

Connect the appropriate RS232 or RJ45 adapter cable to the corresponding port on the CP26 adapter. Ensure a secure connection.

CP26 Adapter connected to RJ45 and RS232

Image: CP26 adapter connected to both RJ45 and RS232 cables.

4.3. Device and Mobile Phone Connection Method (T1 Model)

  1. APP Download:
    • iOS users: Please visit the App Store, search for "DX-SMART," and download/install the app.
    • Android users: Please visit Google Play or your phone's default app store, search for "DX-SMART," and download/install the app.
  2. How to connect the device and mobile phone:
    1. Press and hold the KEY button of CP26 for one second to switch on.
    2. Open the Bluetooth settings and positioning of your mobile phone, then open the App, click 'Transmission', search for Bluetooth devices, and then you can control RS232 devices after successful connection.
Android APP Interface for CP26

Image: Screenshots of the Android DX-SMART APP interface, showing function selection and Bluetooth device list.

4.4. Wireless Communication between Computer (T2 Model)

  1. The computer side needs to be used with our product CP11 Bluetooth adapter (included in the purchase).
  2. Open the datasheet/download it from the official website and install the 'CH341' driver in the datasheet on your computer.
  3. Insert the CP11 adapter into the computer, press and hold the KEY button of CP26 for one second to switch on the computer.
  4. Open the serial port software and select the COM port of the corresponding CP11 adapter, and choose the default parameter configuration: 9600bps/8/n/1.
  5. Wait for the CP11 adapter to actively search for the CP26 Bluetooth converter and connect, the blue light is long on behalf of the connection is successful, after the connection can be data interaction.
Wireless Communication between Computer and Devices Diagrams

Image: Diagrams illustrating wireless communication setup between a computer (using CP11) and the CP26 adapter, and between two CP26 adapters.

4.5. Wireless Communication between Devices (T3 Model)

Wireless data communication between two devices is achieved through the CP26 Multi-function Bluetooth Wireless Converter. Wireless data communication over the 232 interface is realized as shown in the figure below:

  1. Connect the CP26 master to device 1 via the RS232/RJ45 interface.
  2. Connect the CP26 slave to device 2 via the RS232/RJ45 interface.
  3. The CP26 Master Bluetooth will CP26 slave Bluetooth connection.
  4. After the connection can be data interaction.
CP26 Bridging Master-Slave Connection Diagram

Image: Diagram showing two CP26 adapters configured as Master and Slave for device-to-device wireless data transmission, with a 400m transmission distance.

5. Operating Instructions

5.1. CP26 KEY Button Functionality

  • Power On: Press and hold for one second to switch on.
  • Shutdown: Press and hold for three seconds to switch off.
  • Disconnect Bluetooth: When Bluetooth is connected, short press the KEY button once.
  • Toggle Baud Rate: When Bluetooth is disconnected, short press the KEY button twice in quick succession. The number of blue LED flashes indicates the baud rate code.

5.2. CP26 Indicator Lights

  • TX Data Indicator (Red): Blinks when the device is transmitting data.
  • RX Data Indicator (Green): Blinks when the device is receiving data.
  • WORK Operational Status Indicator (Blue):
    • Bluetooth not connected (flashing): The number of flashes indicates the baud rate code (refer to the Baud Rate Numbering Table below).
    • Bluetooth connected (steady on): Blue light is steady on.
  • POWER Charging Indicator (Red): Glows red continuously while charging; turns off when fully charged.

5.3. Baud Rate Numbering Table (CP26)

Flash Count 1 2 3 4 5 6 7
Baud Rate 2400 4800 9600 19200 38400 57600 115200

*Factory default baud rate: 9600, blue LED flashes three times.

5.4. CP11 Adapter KEY Button Functionality (for Computer Control)

  • Disconnect Bluetooth: When Bluetooth is connected, short press the KEY button once.
  • Toggle Baud Rate: When Bluetooth is disconnected, short press the KEY button twice in quick succession. The number of red LED flashes indicates the baud rate code.
CP11 Adapter Hardware Construction Notes

Image: Diagram and notes for the CP11 adapter, detailing KEY button function and indicator lights.

5.5. CP11 Adapter Indicator Lights

  • TX Data Indicator (Green): Flashes when the device transmits data.
  • RX Data Indicator (Blue): Flashes when the device receives data.
  • WORK Operational Status Indicator:
    • Bluetooth not connected (red light flashing): The number of flashes indicates the baud rate code.
    • Bluetooth connected (steady on): Red light is steady on.

5.6. Three Modes of Transmission

CP26 Connection Profile Diagram

Image: Diagram illustrating the CP26 connection profile, showing how devices communicate via Bluetooth using the CP26 wireless adapter.

  • T1: Mobile Phone & CP26 Slave (Transparent Transmission): Connects a mobile phone to a CP26 adapter (slave mode) for wireless data transmission. Transmission distance: 40m.
  • T2: CP11 and CP26 Slave (Computer Model): Connects a computer (with CP11 adapter) to a CP26 adapter (slave mode) for wireless data transmission. Transmission distance: 40m.
  • T3: CP26 Master & CP26 Slave (Device Model): Two CP26 adapters communicate wirelessly, one configured as master and the other as slave. Transmission distance: 420m.
Bluetooth to RS232/RJ45 Application Scenarios

Image: Various application scenarios for the CP26 adapter, including connecting to total stations, switchboards, PLCs, sensors, lift controllers, electronic scales, and thermal printers.

6. Maintenance

To ensure the longevity and optimal performance of your CP26 Bluetooth Serial Adapter, please follow these maintenance guidelines:

  • Keep Dry: Avoid exposing the device to moisture or liquids, as this can damage internal components.
  • Clean Gently: Use a soft, dry cloth to clean the exterior of the adapter. Do not use harsh chemicals or abrasive cleaners.
  • Store Properly: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handle with Care: Avoid dropping or subjecting the device to strong impacts.
  • Cable Management: Ensure all connected cables are not bent sharply or under excessive strain to prevent damage to the cables and ports.

7. Troubleshooting

If you encounter issues with your CP26 adapter, please refer to the following common troubleshooting steps:

  • Device Not Powering On:
    • Ensure the USB charging cable is securely connected and receiving power.
    • Verify the power source is functioning correctly.
    • Press and hold the KEY button for one second to power on.
  • Bluetooth Connection Issues:
    • Ensure the CP26 adapter is powered on and within range of the connecting device (mobile phone or CP11 adapter).
    • Check if the blue WORK indicator is flashing (not connected) or steady on (connected).
    • If already connected, try short-pressing the KEY button once to disconnect and then reconnect.
    • For mobile phone connections, ensure Bluetooth and location services are enabled on your phone.
    • For computer connections, ensure the CH341SER driver is installed and the correct COM port is selected in the serial software.
  • Data Transmission Errors:
    • Verify that the baud rate settings on both the CP26 adapter and the connected device (or software) match. Use the Baud Rate Numbering Table to adjust if necessary.
    • Check the TX (red) and RX (green) indicators for activity. If no lights are blinking, there might be no data flow.
    • Ensure the RS232/RJ45 cables are correctly wired and securely connected to the devices. Refer to the interface pin definitions.
    • Confirm that the connected devices are functioning correctly independently of the adapter.
  • Limited Transmission Range:
    • The specified visible distance of 400m is for unobstructed and open areas. Obstacles like walls, metal structures, and other electronic devices can significantly reduce the range.
    • Ensure the antenna is securely attached and not obstructed.
    • Minimize interference from other wireless devices.

8. User Tips

  • Optimize Range: For best results, especially when using the device-to-device (T3) mode with its 400m range, ensure a clear line of sight between the two adapters. Walls and other obstructions will reduce the effective range.
  • Baud Rate Matching: Always double-check that the baud rate set on the CP26 adapter matches the baud rate of the serial device it's communicating with. Incorrect baud rates are a common cause of communication failure.
  • Software Flow Control: Remember that the module supports software flow control. Configure your serial communication software accordingly if your application requires it.
  • CP11 Driver: When using the CP11 adapter with a computer, ensure the CH341SER driver software is correctly installed. This is crucial for the computer to recognize the adapter.

9. Important Notes

  • Please strictly adhere to the equipment manufacturer's recommendations during use.
  • Please refer to the accompanying installation guide to ensure correct operation and prevent any impact on normal usage.
  • Please use the dedicated connection cables supplied with the equipment and ensure they are correctly inserted into the corresponding ports.
  • When connecting cables, please verify the compatibility between ports and cables. Incorrect connections may result in the equipment failing to function properly.

10. Warranty and Support

Your PDDAXLQUE CP26 Bluetooth Serial Adapter is designed for reliable performance. For any technical assistance or inquiries, please contact our support team.

Download Resources:

For video tutorials, technical support documents, user manuals, test tools, hardware information, and precautions, please use the following resources:

Search for the model you need, you can check the model purchased in your order or consult after-sales staff to check the model you purchased.

If you are unable to download, please contact our after-sales team:

We will respond to your question within 24 hours.

For a comprehensive user manual in PDF format, please refer to the official download resources provided above.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.