1. Introduction
Thank you for choosing these Matte Black Door Mirror Covers. This manual provides essential information for the proper installation, use, and maintenance of your new mirror covers. Designed to enhance the aesthetic appeal and provide protection for your vehicle's rearview mirrors, these covers offer a sleek, matte black finish and a simple clip-on installation.
2. Vehicle Compatibility
These door mirror covers are specifically designed for the following BMW models:
- 2014-2018 BMW 5 Series F10 / F11 / F18 Facelift
- 2014-2018 BMW 5 Series GT F07 Facelift
- 2014-2018 BMW 6 Series F06 / F12 / F13
- 2013-2015 BMW 7 Series F01 / F02 Facelift
Note: These covers are NOT compatible with M5, M6, or M7 models.
Reference Part Numbers: 51167308683 / 51167308684
3. Package Contents
Please inspect the package immediately upon receipt to ensure all items are present and undamaged.
- 2 x Side Mirror Covers (Matte Black)
4. Installation Instructions
These mirror covers feature a simple clip-on installation design, requiring no modifications to your vehicle. Professional installation is recommended for best results, but DIY installation is possible with care.
4.1. Tools Required
- Plastic trim removal tool (recommended to prevent scratches)
- Clean microfiber cloth
4.2. Installation Steps
- Prepare the Area: Ensure your vehicle is parked on a level surface and the engine is off. Clean the existing mirror housing thoroughly to remove any dirt or debris.
- Remove Existing Cover (if applicable): If your vehicle has existing mirror covers, carefully use a plastic trim removal tool to unclip them. Start from one edge and gently pry around the perimeter until the cover detaches. Be careful not to damage the mirror glass or the housing.
- Inspect New Cover: Examine the new matte black mirror cover. Note the clips on the back designed to secure it to the mirror housing.
- Install New Cover: Align the new mirror cover with the mirror housing. Press firmly and evenly around the edges until you hear and feel the clips engage securely. Ensure all clips are properly seated.
- Verify Fitment: Gently tug on the installed cover to ensure it is firmly attached and does not wobble. Repeat the process for the other side.
Caution: Do not use excessive force during installation, as this may damage the clips or the mirror housing.
5. Operation and Benefits
Once installed, your new matte black door mirror covers will provide an immediate aesthetic upgrade to your BMW. Beyond their stylish appearance, they also serve to protect your original rearview mirror housing from minor scratches, chips, and environmental elements.
- Enhanced Aesthetics: The smooth, inconspicuous matte black finish and curved design contribute to a unique racing-inspired look.
- Protection: Effectively shields the original mirror housing from damage.
- Durability: Made from high-quality ABS material with an abrasion coating for long-lasting performance.
6. Care and Maintenance
To maintain the appearance and longevity of your mirror covers, follow these simple care instructions:
- Cleaning: Clean the covers regularly with a soft, damp cloth and mild automotive soap. Avoid abrasive cleaners or harsh chemicals that could damage the matte finish.
- Drying: Dry the covers immediately after washing with a clean microfiber cloth to prevent water spots.
- Inspection: Periodically check the covers to ensure they remain securely clipped in place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cover does not fit properly. | Incorrect vehicle model or year. | Verify your vehicle's compatibility with the list in Section 2. Ensure it is not an M-model. |
| Cover feels loose after installation. | Clips not fully engaged. | Gently press around the edges of the cover to ensure all clips are securely fastened. If still loose, carefully remove and re-install. |
| Scratches or damage during installation. | Improper tools or excessive force. | Always use a plastic trim removal tool and apply gentle, even pressure. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Type | Door Mirror Covers / Caps |
| Material | High-quality ABS with matte finish |
| Color | Matte Black |
| Installation Type | Clip-on, no modifications required |
| Reference Part Numbers | 51167308683 / 51167308684 |
| Package Dimensions (approx.) | 29 cm (L) x 17 cm (W) x 13 cm (H) |
| Package Weight (approx.) | 0.46 kg |
| Origin | Mainland China |
9. User Tips
While no specific user reviews or Q&A were available, here are some general tips for automotive exterior accessories:
- Pre-fitment Check: Before starting installation, always dry-fit the covers to ensure they align correctly with your mirror housing.
- Temperature: Install in moderate temperatures. Extreme cold can make plastic brittle, and extreme heat can affect adhesion (though these are clip-on, not adhesive).
- Cleanliness: A clean surface is crucial for any automotive accessory. Ensure the area is free of wax, polish, and dirt.
10. Warranty and Support
For any questions regarding installation, compatibility, or product issues, please contact the seller or retailer from whom you purchased this product. Specific warranty details, if any, are typically provided by the seller at the time of purchase.
Please retain your proof of purchase for any support inquiries.