1. Product Overview
The NOYAFA NF-613 is a handheld industrial integrated endoscope designed for various inspection tasks, including auto repair, pipeline maintenance, circuit detection, and parts testing. It features a high-definition IPS screen, an 8mm waterproof camera lens with adjustable LED lighting, and a durable hard-wire cable for stable image transmission.
Key Features:
- Display: 2.4-inch full-color IPS screen (1280x720P resolution)
- Camera Lens: 8mm diameter, HD lens with new imaging technology
- Waterproof: IP67 rating for the camera lens, suitable for underwater exploration
- Lighting: 6 adjustable brightness LED light beads for dark environments
- Battery: 2600mAh capacity, providing up to 5 hours of working time
- Cable: High wear-resistant pure copper superconducting hard wire for stable image quality
- Control: Easy-to-use three-button interface
2. Setup Guide
2.1 Package Contents
Before starting, ensure all components are present:
- NOYAFA NF-613 Endoscope Unit
- Endoscope Camera Cable (1M, 2M, 5M, or 10M depending on model)
- USB Charging Cable
- User Manual (this document)
2.2 Charging the Device
The NF-613 endoscope is equipped with a 2600mAh battery. For optimal performance, fully charge the device before first use.
- Connect the provided USB charging cable to the charging port on the endoscope unit.
- Connect the other end of the USB cable to a standard USB power adapter (not included) or a computer's USB port.
- The charging indicator (if present) will show the charging status. A full charge typically takes approximately 5 hours.
Figure 2: Battery Capacity and Life
2.3 Attaching the Camera Cable
The camera cable is integrated with the main unit. Ensure it is securely connected before use. The cable is designed to be wear-resistant and durable.
Figure 3: Hard Wire Construction
3. Operating Instructions
3.1 Power On/Off
- To power on the device, press and hold the power button (usually located in the center of the three control buttons) until the screen illuminates.
- To power off, press and hold the power button again until the screen turns off.
3.2 Adjusting LED Brightness
The camera lens features 6 adjustable LED lights to illuminate dark inspection areas.
- Use the dedicated light adjustment buttons (usually on either side of the power button) to increase or decrease the brightness of the LEDs.
- Adjust the brightness to achieve optimal visibility without overexposure.
Figure 4: LED Brightness Adjustment
3.3 Viewing the Inspection Area
The 2.4-inch IPS screen provides a real-time view from the camera lens.
- Carefully insert the camera lens into the area you wish to inspect.
- Observe the live feed on the screen. The camera's focal length is 4-10cm for clear imaging.
- The IP67 waterproof lens allows for fearless underwater exploration in corrosive and wear-resistant environments.
Figure 5: IP67 Waterproof Lens in Use
3.4 Common Applications
The NF-613 endoscope is versatile for various industrial and automotive applications:
- Auto Repair Inspection: Examine engine components, internal parts, and hard-to-reach areas in vehicles.
- Parts Testing: Inspect the integrity and condition of various mechanical parts.
- Air Conditioning Maintenance: Check ducts, vents, and internal AC unit components.
- Circuit Maintenance: Inspect wiring, connections, and electronic components in tight spaces.
Figure 6: Auto Repair Inspection
Figure 7: Parts Testing
Figure 8: Air Conditioning Maintenance
Figure 9: Circuit Maintenance
4. Maintenance
4.1 Cleaning
- After each use, especially in dirty or wet environments, gently wipe the camera lens and cable with a soft, damp cloth.
- For stubborn dirt on the lens, use a lens cleaning solution and a microfiber cloth.
- Do not use abrasive cleaners or solvents on any part of the device.
- Ensure the lens is dry before storing.
4.2 Storage
- Store the endoscope in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid kinking or sharply bending the camera cable to prevent damage to the internal wiring.
- Keep the device away from strong magnetic fields.
5. Troubleshooting
- Device does not power on: Ensure the battery is fully charged. Connect the device to a power source using the USB charging cable and try again.
- No image on screen: Check if the device is powered on. Ensure the camera cable is not damaged.
- Image is blurry or unclear: Adjust the LED brightness to an appropriate level. Ensure the camera lens is clean and free from obstructions. Position the camera within the optimal focal length of 4-10cm from the object.
- LED lights are not working: Check if the device is powered on. Ensure the LED brightness is not set to the lowest level.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | NOYAFA |
| Model Number | NF-613 |
| Display | 2.4 inch IPS Color Screen |
| Camera Lens Diameter | 8mm |
| Camera Resolution | 1280x720p |
| Horizontal Viewing Angle | 70° |
| Focal Length | 4-10cm |
| Waterproof Rating | IP67 (for lens only) |
| Battery Capacity | 2600mAh |
| Working Time | Approx. 5 hours |
| Light Source | 6 adjustable brightness LEDs |
| Wire Type | Hard Wire (Pure Copper Superconducting) |
| Cable Length Options | 1M, 2M, 5M, 10M |
| Certification | CE, FCC |
Figure 10: Product Parameters
7. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original seller or the manufacturer directly. Keep your purchase receipt as proof of purchase.
Certifications:
This product is CE and FCC certified, indicating compliance with relevant health, safety, and environmental protection standards.
8. User Tips
- Optimal Viewing: Experiment with the LED brightness settings to find the best illumination for your specific inspection environment. Too bright can cause glare, while too dim will obscure details.
- Focal Distance: Remember the optimal focal length is 4-10cm. Try to keep the camera lens within this range from the object you are inspecting for the clearest image.
- Cable Management: While the cable is durable, avoid sharp bends or excessive force when maneuvering it to prolong its lifespan and maintain stable image transmission.
- Battery Life: For extended use, ensure the device is fully charged. If performing long inspections, consider having a portable power bank available for recharging.
- Lens Protection: Although the lens is IP67 waterproof, always clean it after use, especially after exposure to liquids or debris, to prevent residue buildup that could affect image quality.
