Hcalory D35/45/55M Series

Contents

Hcalory Dual-Zone Car Refrigerator User Manual

Models: D35M, D45M, D55M Series

Brand: Hcalory (Parent Company: KROAK)

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your Hcalory Dual-Zone Car Refrigerator. Please read it thoroughly before first use and keep it for future reference.

Product Features

  • High-quality DC variable frequency compressor for efficient, energy-saving, stable, and reliable mobile refrigeration.
  • Microcomputer intelligent control system for precise temperature control.
  • Innovative dual temperature zone function with free switching between freezing and refrigeration modes.
  • Compatible with DC 12V/24V power input, suitable for various scenarios (car, marine, home, outdoor).
  • Voltage detection and low voltage protection to prevent car battery over-discharge.
  • Inner container made of food-grade plastic material, safe, anti-leakage, and anti-odor.
  • Built-in LED lighting for convenience in low-light conditions.
  • High-definition LED digital display.
  • Intelligent touch operation buttons with keyboard child lock function.

2. Setup

Unpacking and Initial Placement

After receiving and unpacking the refrigerator, please leave it standing for more than 12 hours before use. This allows the refrigerant to settle properly.

Place the refrigerator in a well-ventilated area. Ensure a gap of at least 100 mm between the cooling hole on the compressor side and other objects to prevent overheating and maintain optimal refrigeration performance.

Car refrigerator with power supply options: solar panel/power station, AC 100-240V, DC 12/24V.
Figure 2.1: Multiple Power Supply Methods (Solar Panel/Power Station, AC 100-240V, DC 12/24V)

Power Connection

Connect the appropriate DC 12V/24V power supply. The refrigerator is compatible with various power inputs, including AC 100-240V for home use, and DC 12V/24V for vehicle use. Ensure the power supply lines and fuses have sufficient carrying current. If using an AC device in a car, RV, or yacht, professional installation is required.

Car refrigerator placed in a car trunk, showing dimensions: 69.1cm length, 39.0cm width, 44.3cm height.
Figure 2.2: Car Refrigerator Dimensions in a Vehicle Trunk

APP Download and Connection

If your refrigerator has Bluetooth functionality, you can control it via the Tuya Smart APP.

  1. Enable Bluetooth and Wi-Fi on your mobile phone.
  2. Open your mobile app store, search for and install the "Tuya Smart APP".
  3. Open the Tuya Smart APP.
  4. The app will search for nearby Bluetooth devices. Select your car refrigerator from the search results and click to connect. If the device is not automatically discovered, click "Add Device".
  5. Once connected, you can monitor and control the refrigerator's temperature, working mode, and battery status through the app.

Note: If the mobile app cannot connect to the car refrigerator:

  1. First, ensure Bluetooth is enabled on your phone.
  2. Restart the car refrigerator and enable Bluetooth in its interface.
  3. Have the app attempt to connect again.
Tuya Smart APP logo and screenshots of the app interface showing device discovery and connection.
Figure 2.3: Tuya Smart APP Interface for Device Connection

3. Operating Instructions

Control Panel Overview

Diagram of the car refrigerator control panel with buttons for Temperature Up, Display, On/Off, Temperature Down, Child Lock, and Set.
Figure 3.1: Control Panel Layout
  • Temperature Control Range: -20°C to 20°C (-4°F to 68°F).
  • On/Off: Long press the On/Off button for 2 seconds to start, and 3 seconds to turn off (when unlocked).
  • Display: Shows current temperature, working mode, and other indicators.
  • Temperature Adjustment: Use the "Up" and "Down" buttons to adjust the temperature. Each press changes the temperature by 1 degree. Holding the button allows for rapid adjustment.
  • Set Button: Used to switch compressor working modes and adjust low voltage protection.

Control Panel Locking and Unlocking

If the control panel is locked (indicated by the child lock icon), press and hold the "Up" and "Down" buttons simultaneously for 3 seconds to unlock. The panel will automatically lock after 20 seconds of inactivity.

Compressor Working Modes

With the control panel unlocked, press the "Set" button to switch between "ECO" and "MAX" modes.

  • MAX Mode: Provides powerful cooling for rapid temperature reduction.
  • ECO Mode: Energy-saving mode for normal refrigeration or heat preservation, consuming less than 0.18 kWh per day.

Low Voltage Protection Function

This product features low voltage protection to prevent excessive discharge of your car battery. If the battery voltage drops below the set value, the compressor will automatically turn off, and an "E1" error code will be displayed. The refrigerator will resume operation one minute after the voltage returns to normal.

To change the low voltage protection level (factory default is "Medium"):

  1. Unlock the control panel.
  2. Long press the "Set" button for 3 seconds until you hear a "Di" sound, then release.
  3. Press the "Set" button once. One of the battery protection level icons ("L", "M", "H") will flash.
  4. Use the "Up" or "Down" buttons to select the desired level.

Warning:

  • If the refrigerator enters battery protection prematurely, it may be due to insufficient power supply voltage, a high low-voltage protection setting, or improper DC power supply wiring. Verify your wiring and consider lowering the battery protection level if necessary.
  • To avoid affecting normal car startup, it is recommended to set the protection level to "H" when using the refrigerator in the car.

Dual Temperature Zone Function

The refrigerator automatically identifies temperature zones. With the middle partition inserted, it defaults to a dual temperature zone: the left zone for freezing and the right zone for refrigeration. The freezing zone temperature can be adjusted. Removing the middle partition converts it to a single temperature zone, with the temperature controlled by the actual set value.

Diagram showing dual zone functionality of the car refrigerator, with one side set to -20°C (freezer) and the other to 0°C (fridge).
Figure 3.2: Dual Zone Operation

4. Cleaning and Maintenance

Before cleaning, disconnect the power supply. Wipe the inner and outer surfaces of the refrigerator with a cleaning cloth dampened with water or a mild detergent. Do not wash the refrigerator directly with water to avoid damaging electrical components.

If the refrigerator will not be used for a long time, clean the interior and exterior thoroughly, ensure it is dry, and take moisture-proof and dust-proof measures to prevent mold and odors.

5. Troubleshooting

Error Code Description

If the compressor, module, fan, or temperature sensor is abnormal, or the input voltage is too low, an error code will appear on the display screen, and the compressor will stop. After resolving the abnormality, unplug and re-plug the power supply. The refrigerator temperature will display normally, and the compressor cooling mode will resume after 1 minute.

Table 5.1: Error Codes and Solutions
Error CodeProblemSolution
E0Temperature sensing head is damagedCheck or replace the temperature sensor
E1Input voltage is too lowCheck input voltage and adjust battery protection level
E2DC fan over current protectionCheck the cooling fan
E3Abnormal start of compressorTurn off power and let it stand for 30 minutes
E4Abnormal compressor speedAdjust compressor operation mode (MAX/ECO)
E5Module temperature too highMove refrigerator to a ventilated place to lower module temperature

Common Issues and Solutions

If the product does not work properly:

  1. Check if the power is on.
  2. Check if the voltage is too low.
  3. Check all connections from battery to refrigerator for looseness or poor contact.
  4. Check the fuse.
  5. Check if the refrigerator is turned on.
  6. Check if the temperature is set too high.

If refrigeration performance is poor:

  1. Too much food is in the refrigerator.
  2. The temperature of the food in the refrigerator is too high.
  3. The door is not closed properly.
  4. The door seal (sealing ring) is damaged.
  5. Ventilation around the refrigerator is poor.
  6. The ambient temperature is too high.
  7. Incorrect temperature setting.

You hear a "water flowing" sound in the refrigerator:

This is normal and is caused by the flow of refrigerant.

When the refrigerator starts, the sound is loud:

  1. Check if the refrigerator is placed on a flat, horizontal surface.
  2. Check for vibrations from surrounding objects.
  3. A slightly louder sound is normal when the compressor motor transitions from static to high speed. The sound will decrease once the speed stabilizes.

Water drops around the shell or door seal:

This is normal. Moisture in humid air condenses into water droplets when it comes into contact with a colder surface.

6. Specifications

Table 6.1: Technical Parameters
ParameterD35MD45MD55M
Input Voltage12V/24V
Input of Adapter100-240Vac 50/60Hz
Temperature Control Range-20°C ~ 20°C
CryogenR600a
Insulation MaterialPolyurethane foam
Rated Power45W
Rated Current3.75A/1.875A
Net Weight13.2Kg14.1Kg14.9Kg
Product Size (L*W*H) mm691*390*373691*390*443691*390*513

Standard Packing List

  • 1x Car refrigerator
  • 1x DC cable
  • 1x AC cable and adapter
Table 6.2: Optimal Storage Temperatures
ItemTemperature
Purified water5°C
Drinks5°C
Fresh juice8-10°C
Red wine13°C
Fruits5-8°C
Vegetables3-10°C
Cooked Food4°C
Seafood-3°C
Meat-18°C
Frozen Foods-18°C

7. Warranty and Support

Warranty Information

From the date of purchase, the unit is covered by a 1-year warranty, and the compressor by a 3-year warranty, for any quality issues.

Warranty Exclusions:

  • Damage due to improper use (including use of parts/components from other manufacturers).
  • Artificial damage.
  • Failure or damage caused by not following the operating instructions.
  • Failure or damage caused by unauthorized disassembly.
  • Damage caused by force majeure events (e.g., earthquake, fire).
  • Loss of objects stored inside the refrigerator.
  • Damage to fuses, connectors, power sockets, and handles.

Contact Us

If you have any questions during use, please contact customer service at the store where you purchased the product. Provide your order number for prompt assistance.

8. User Tips

  • For optimal cooling, ensure the refrigerator is placed on a flat surface and has adequate ventilation (at least 100mm clearance around cooling holes).
  • After unpacking, let the refrigerator stand upright for at least 12 hours before plugging it in.
  • If using in a vehicle, setting the low voltage protection to 'H' is recommended to prevent draining the car battery.
  • The dual-zone feature is very convenient for separating items that need freezing from those that only need refrigeration.

9. Frequently Asked Questions (FAQ)

Q: Does the box have Bluetooth?
A: Yes, if you purchased the Bluetooth version, you can control the refrigerator via the Tuya Smart APP.
Q: Can you also convert the lid to the other side?
A: The provided information does not specify if the lid is reversible. Please consult the product diagram or contact customer support for clarification.

10. Product Demonstration Video

This video demonstrates the features and portability of the Hcalory car refrigerator, including its large capacity, dual-zone cooling, power options, anti-shaking design, low noise operation, and ease of transport with wheels and a non-slip handle. It also shows the fast cooling capability and use in outdoor settings for cooking and chilling beverages.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.