Savior Heat S13

Contents

Savior S13 Heated Waterproof Motorcycle Gloves User Manual

Model: S13

1. Introduction

Thank you for choosing Savior S13 Heated Waterproof Motorcycle Gloves. These gloves are designed to provide warmth and comfort during cold weather activities such as motorcycling, skiing, running, walking, fishing, and hunting. Featuring three heating levels and touchscreen compatibility, they ensure your hands stay warm and functional.

2. Safety Information

  • Do not use the gloves if they are wet or damaged.
  • Keep batteries away from water and extreme temperatures.
  • Do not puncture or disassemble the batteries.
  • If you experience discomfort or excessive heat, reduce the heat level or turn off the gloves immediately.
  • Consult a doctor before use if you have a medical condition, especially related to circulation or nerve sensitivity.

3. Package Contents

The standard package includes the following items:

  • 1 Pair of Savior S13 Heated Gloves
  • 2 x 7.4V 2200mAh Li-ion Batteries
  • 1 x US Standard Dual Charger (charger type matched to country of order)
  • 1 x User Manual
  • 1 x Carry Bag
  • 1 x Gift Box
Savior S13 Heated Gloves package contents including gloves, batteries, charger, and user guide.
Figure 1: Package Contents

4. Specifications

Feature Description
Model S13
Material Imported sheepskin, cotton, windproof fabric
Battery Type 7.4V 2200mAh Li-ion Battery
Heating Levels 3 (High, Medium, Low)
Heating Temperature 40℃~65℃ (104℉~149℉)
Heating Time 2.5 - 6.5 hours (depending on heat level)
Features Waterproof, Windproof, Touchscreen Compatible, Infrared Heating
Package Dimensions 35cm (L) x 33cm (W) x 5cm (H)
Package Weight 0.75 kg
Heated Gloves Size Chart showing hand circumference and middle finger length measurements for sizes XS to XXXL.
Figure 2: Size Chart

5. Setup Instructions

5.1. Charging the Batteries

  1. Before first use, fully charge both 7.4V 2200mAh Li-ion batteries for at least 4 hours.
  2. Connect the batteries to the provided dual charger.
  3. Plug the charger into a standard wall outlet.
  4. The indicator lights on the charger will show the charging status (typically red for charging, green for fully charged).

5.2. Installing the Batteries

  1. Locate the zippered pocket on the cuff of each glove.
  2. Insert one fully charged battery into each pocket.
  3. Connect the battery cable from the glove to the battery.
  4. Zip up the pocket to secure the battery.
Close-up of a hand inserting a battery into the zippered pocket on the glove cuff.
Figure 3: Battery Installation

6. Operating Instructions

6.1. Powering On and Adjusting Heat Levels

Each glove has a power button on the cuff to control the heating system.

  1. To Power On: Press and hold the ON/OFF button for a few seconds until the indicator lights illuminate. The gloves will typically start on the High heat setting (3 light bars).
  2. To Adjust Heat Level: Briefly press the ON/OFF button to cycle through the heat settings:
    • High (3 light bars): Provides the highest heat (60-65℃ / 140-150℉) for approximately 2-2.5 hours.
    • Medium (2 light bars): Provides moderate heat (45-50℃ / 122-131℉) for approximately 3-3.5 hours.
    • Low (1 light bar): Provides gentle heat (35-40℃ / 104-113℉) for approximately 6-6.5 hours.
  3. To Power Off: Press and hold the ON/OFF button again for a few seconds until all indicator lights turn off.
Diagram showing three heating levels with corresponding temperatures and durations: High (60-65C, 2-3H), Medium (45-50C, 3-4H), Low (35-40C, 5-6H).
Figure 4: Heating Levels and Durations
Diagram of a heated glove showing heat distribution across the fingers and palm, with temperature and duration settings on the side.
Figure 5: Heat Distribution and Settings

6.2. Product Demonstration Video

Video 1: Product demonstration showing features like touchscreen compatibility, heating levels, and heat distribution to the fingertips.

7. Maintenance

7.1. Cleaning the Gloves

  • Remove batteries before cleaning.
  • Hand wash with mild detergent in cold water. Do not machine wash or tumble dry.
  • Do not wring the gloves. Gently squeeze out excess water.
  • Hang dry thoroughly before storing or reusing.
  • Do not iron or bleach.

7.2. Battery Care and Storage

  • Store batteries in a cool, dry place when not in use.
  • For long-term storage, charge batteries to about 50% capacity every 3-6 months to maintain battery health.
  • Do not store batteries connected to the gloves.
  • If batteries show signs of damage (swelling, leakage), discontinue use and dispose of them properly.

8. Troubleshooting

8.1. Gloves Not Heating or Heating for Short Duration

  • Issue: Gloves only heat for approximately 30 minutes and then turn off, especially during first use.
  • Solution: Most batteries are not fully charged upon delivery. Ensure batteries are charged for at least 4 hours before initial use.

8.2. One Glove Not Heating

  • Issue: Only one glove is heating, or one glove is not heating at all.
  • Solution: Check the battery connection in the non-heating glove. Ensure the battery is properly inserted and the cable is securely connected. Try swapping batteries between gloves to identify if the issue is with the glove or the battery.

8.3. Power Button Not Responding

  • Issue: The power button does not respond when pressed.
  • Solution: Ensure the battery is fully charged and correctly connected. If the issue persists, the battery or the glove's internal wiring may be faulty.

9. User Tips

  • Full Charge for Optimal Performance: Always ensure your batteries are fully charged (at least 4 hours for the first charge) to experience the full heating duration and performance.
  • Fingertip Warmth: The heating elements are designed to extend all the way to the fingertips, providing comprehensive warmth for your entire hand.
  • Touchscreen Compatibility: The gloves feature touchscreen-compatible fingertips, allowing you to use your smartphone or other touch devices without removing your gloves.
A person wearing the heated gloves interacting with a smartphone, demonstrating touchscreen compatibility.
Figure 6: Touchscreen Compatibility

10. Warranty and Support

Savior Heat S13 Heated Gloves come with a half-year warranty period from the date of purchase. This warranty covers manufacturing defects and issues related to quality under normal use.

For any questions regarding product quality, size, battery performance, charger issues, or general support, please contact our customer service team. We are committed to resolving your concerns promptly and to your satisfaction.

Contact Information: Please refer to the seller's contact details on the platform where you purchased the product for direct support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.